BitFenix BFC-ESM-150-KKWGK-RP Enso Mesh Case Black Mesh Front Panel

good, very confusing manual and the fans and fan controller are very very cheap so consider getting the one without rgb or if there is one without fans

Purchased case for my GF to build her computer in. Wanted something bright and flashy for her and this fits the bill great!Other than the 3.5" HDD cage being unreasonably close to the PSU making cable routing hard it might be nearly impossible if you actually have HDD installed.The only modification I did was to move the AURA Sync controller up on the backside and attach with double stick 3M pads so the AURA cable could reach the header on the ASUS X570 TUF Gaming Plus (Wifi).Included fans aren't too loud when operating at a reasonable RPM.

This case is nice for the money. Fairly easy to work in. It looks great with all the RGB lights in it! The metal mesh front is a nice bonus for air flow. I love the fact it comes with RGB lights pre-installed on the front and one RGB fan. There are a few drawbacks but nothing that can’t be worked with. The thumb screws on the back panel were tightened down very tight. A screw driver was needed to get them off the first time. They will fall out once loosened, unlike some cases where they hang on. But at least the option for a screw driver is there to remove them. The Power Supply Unit is difficult to install due to the fact the HDD caddy isn’t removable. It is stationary and gives little room to install the PSU. It would be nice if the HDD caddy was removable or if the case had the option of having a removable back panel to slide the PSU in from the back, then put the panel back on. The wires for the PSU are a cramped. Moving the HDD caddy over just a mm or 2 to the left would be nice while still leaving room for a 360 rad. Though I could see where that would be pushing the limit on space too for the radiator. If you want to use an AIO you have to mount on the front of the case. There just isn’t enough room in the top for both radiator and fans to clear the motherboard. This case will support a 240mm or 360mm AIO on the front side only!The rubber garments are a nice touch. Wish all the cutouts had them though, but that’s just personal preference. They’re easy to push out so you gotta be gentle when routing cables.Overall, I like the case, my components are staying cool. If anything the case could be a little bigger to allow room for flexibility for psu cables in the bottom and to have the option for a top mount AIO. Cable management was easy too. A little tight but manageable. Also 2 USB 3.0 ports on the top of the case with front end mic and audio ports. Good value for the money, yet for the cost of the unit I would like to see the suggested improvements included.

I bought this case for my home and leisure computer, built it and everything seemed fine at first! I couldnt get the case to sync with the light button (although the back fan lights synced no problem) so I opened it back up and the front lights completely failed. Checked the cords, the back fan light (connected to the same light cable as the front lights) works just fine, letting me know that it's the front lights themselves causing the issues. Very disappointed.

Nice price!

It's a good case. Super hard to connect front panal LED connections to motherboard with limited space for your hands to work with. Lights weren't working as well.

Only issue I had was there was a lack of room for cable management when you start adding LED command modules.

This is my first build and I wanted it bright and colorful. This case was perfect.The back panel is a pain to remove and I found that my glass panel can only be put in rotated a particular way but it's still a great case.Also, there isn't a lot of spaces for cable management but I think I did okay.I haven't had any overheating so the airflow seems to be good too.

Decidí cambiar mi torre ya que la antigua no tenia demasiado flujo de aire, elegí esta ya que es mallada y ademas incluye 4 ventiladores "gratis", el montaje fue muy sencillo, teniendo en cuenta que e desmontar y montar un pc no es algo que haya hecho demasiadas veces, aun asi es espaciosa y no dificulta nada el montaje, otro punto es que a pesar de que no soy muy fan del RGB, he de decir que el que trae esta torre en el frontal es muy estético y queda muy chulo

Una caja muy completa para un ordenador gaming.>Pantalla lateral de metacrilato transparente oscurecido para ver los interiores>Incluye 2 ventiladors y múltiples areas ventiladas con filtros magneticos de polvo>Bahia separada para la fuente de alimentación, en el inferior de la caja>Permite distribuir los cables de forma que no molesten ni sean visibles>Bahias ocultas para SSD y HDD.>Espacio muy amplio, una RTX 3070Ti entra de sobra>Soportes para los puertos de las PCI moviles.Contras:>No consigo hacer que el controlador RGB funciona para modificar las luces.>Se queda justo para poner una RL en el hueco superior si tu placa base tiene disipadores en los mosfet

Commandé afin de remplacer un Kolink vieillissant, le prix m'a séduit car étaient compris 4 ventilateurs Argb.La conception du boitier est bonne, le niveau de finition acceptable.Le châssis semble fragile si on compare à du Be Quiet ou du Corsair.Par rapport à mon ancienne tour, j'ai perdu 4-5 degrés, donc c'est pas mal.Le boitier se révèle silencieux à bas régime, c'est parfait.Petit bémol sur le contrôleur Argb, car malgré avoir bien branché tous mes câbles, je ne perçois qu'une lumière bleue, bizarre.

Rapporto qualità prezzo eccezionale.

Parfait 4 étoiles car pas de notice pour le branchement du contrôleur pwm/argb