Dolphin DPS400 Reverse Parking Sensors Auto Express Award Winning In 32 Colours 4 Ultrasonic Radar Sensors Kit Audio Alert System Matt & Gloss Black +30 More Colours (Purple)

Fantastic product bought these for my daughters first car. I’ve had mine for 2 years with no issues. Easy to install for someone with good DIY skills. Personal I found taking the bumper of was best but not essential. Definitely recommend these 👍👍

This product was installed by several other campervan owners so I thought I'd use the same. It works, installation was relatively easy on a Fiat Ducato though where you hide the control box and speaker can be tricky. Sensitivity can be adjusted but there's no control of the speaker volume.

I fitted these to a 2002 Honda CR-V. I can’t say it was easy, but probably no more difficult than other similar products. I had to use the angled spacers/washers that come supplied because the bumper is angled upwards where they need to be fitted. Maybe because of this, the sensors aren’t perfectly flush to the bumper, there’s about 0.5mm gap in places. When you push them in, don’t push the centre, push the surrounding ring.I tapped into the live feed of the reversing light as instructed, but tapped into an available earth wire rather than a metal body part.I can’t understand why the power and earth leads are simple wires, meaning you should really strip the live to the reversing light and solder it in. I used Posi-Tap connectors which made it much simpler and results in less damage to the car’s wiring. In my opinion, Posi-Taps should be included in the box. I would recommend getting some if you’re taking this on.I would also recommend watching every YouTube video you can find on the subject, especially if you can find ones specific to your make and model of car.I’m no auto electrician but I do have limited experience of messing about with motorbikes. Also my car isn’t worth much, so the risk was low. If you have no experience of doing stuff like this, and/or your car is worth quite a bit, I would suggest finding a professional to do it for you, or at least a knowledgeable mate. It took me about 5 hours. The bumper had to come off, and most of the boot interior and trim (it may be easier on your car). I’m cream crackered now!Bear in mind, there are lots of weird little plastic clips that hold bumpers and trims together, and they break if you force them or do it wrong.To be honest, the instructions aren’t up to much. Theres more info and instructions on their website, and on the Amazon ad, than there is in the box. Do your research. Read and watch everything you can find. Then maybe get someone else to do it for you ;)Oh, they do work btw, so I’m happy. Overall, good value.

Fitted this kit to my mother-in-law's 2005 Peugeot 307. Pretty straightforward - took about 3 hours, a good part of which was spent working out best way to get the sensor leads back into the boot space. Would have been good if kit had included a Scotchlock connector to hook into the reversing light power lead.Installed, the sensors do not seem to be quite as sophisticated as manufacturer's original equipment - the transition between beeps and continuous warning sound is quite abrupt. The continuous sound, however, reliably comes on when 25 cm from obstruction. Overall a good product and value for money.

The colour is pretty much as exact match, cannot tell the difference at all. Took me a few hours to get everything lined up, drilled, holed and wiring plumbed in, but well worth the worth the effort. Managed to install them without removing the bumper too. I haven't quite figured out what the +/- sensitivity actually does, seems to be the same whether it's tuned up or down, but perhaps I just need to have more of a play about with it.Overall, very happy. I even rang the vendor directly for advice, etc, and they were extremely helpful.Measure, measure, measure, and cut one, and you should be fine. Just make sure everything lines up

Had been considering to buy some reversing sensors for my wife`s Ford Fiesta and having carried out some online reviews these Dolphin sensors came highly rated albeit dearer than other similar products.First purchase (Storm Grey) was not as close a match to the colour of the Fiesta so had to return them (with no problem from seller) and re order Iron Grey coloured sensors which were a much closer match..Son in law is a mechanic and he installed them in about one hour without much of a problem..After four days of use they are currently working perfectly with the solid "buzzing" sound showing a distance of about 12 inches to the object at the rear of the car; so at present very pleased..One thing I have been made aware of is these are classed as a modification to your vehicle (even though it is obviously to benefit and assist you) and your insurance company should be informed.. Some will not charge you any additional premiums but others will as they say it makes you more complacent in reversing (which I disagree with) just for info, up to you if you inform your insurance or not but you know what they are like if you have a bump.. "oh you didn`t inform us about the modification!"Great product though and highly recommended by myself..**UPDATE****It`s now October 2021 and these reversing sensors are still working flawlessly on my wife`s 2011 Ford Fiesta, very pleased with them.........UPDATE SEPT. 2022Still working perfectly.....

Nothing bad to say, plan ahead and couldn't be easier, highly recommend.

Very easy to install work well but the centers may not pick up on a single post ie lamp post, gate post. Otherwise good.