Custom Shop - Gray Epoxy Primer/Sealer 2.1 VOC (Gallon Kit) Anti-Corrosive DTM High-Performance for Automotive and Industrial use. Kit = 2 Qt. Epoxy Primer + 2 Qt. Hardener (1-1 Mix)

it laid down nice & smooth.

I am restoring a 1978 Jeep CJ7 and doing a custom paint job at home. The Jeep will be painted black and orange, the black primer is perfect for this project as a base coat.This primer is very easy to mix and apply with a compressor spray gun, a little goes a long way! So far, I have primed the front end and only used half a can, leaving a can and a half left to complete the job, plenty for my needs. After wet-sanding with an ultra fine grit, the need for a second coat is not expected. With proper painting technique, I have not run into any runs in the paint, and an even coat.I purchased the same brand of black paint to accompany the primer, and anticipate superior results.

I purchase this DTM primer often. Depending on the project I'm painting. I have to say this time I got a bad batch. I mixed it according to the mixing ratio as always but this time when I went to sand it smooth so I can seal the motorcycle tank fender and truck doors to paint them today. It was hard as hell and took me 2 hours just to sand down half the rear tire fender. I quit for the night mind you this was after getting off my regular job last night. Was very aggravated last night when I should have had everything done in 2 hours.Not all are bad, but this one was.

Pigment is hard at the bottom and needs to be mixed with a paint mixer most people at their home do not have this. So take some heavy duty quick ties cut them about 7 inches long or how long you need them put all the product inside of another container, make a lid with a hole in it run the quick ties through and spin it with your drill. It will beat the living hell out of it and bust it all up and mix it up nice and smooth and then pour it back into the original containers, that’s how I was able to get mine to work . for better reviews premix your product before you send them out

Sprayed out as nice as epoxy and as sealer

My 1990 Toyota pickup had the bad clear coat issue and I needed to take it all the way down to metal in some spots since the original primer was compromised. I originally wanted to get the black primer but all the clumping reviews made me choose the gray. No issues with mixing and impressed with the durability of the product. I shot the single stage color after the 20 min flash time of this product since I had read there can be adhesion issues of the paint if you wait till after a 48 - 72 hour window (but do your own research: I’m not a paint expert just telling you what worked for me). Now I feel confident to fix any issues with scratches/dents in the future since I have a solid primer coat under the paint.

The shipment was late, by a few days, but I have used products from TCP Global in the past, it is worth the wait.

Muy buena calidad y precio, lo recomiendo