Specification: Spray Gun Material: Aluminum Alloy Cup Material: PVC Color:Green & Silver Type:High Volume Low Pressure Fluid Nozzle: 1.4mm, 1.7mm, 2.0mm Air Consumption: 14.5CFM Operating Pressure: 2-3.5 bar Pattern Width: 160-240mm Hopper Size: 10CM Diameter Air Inlet: 1/4 inch Cup Capacity: 600cc Precautions for use 1.Before spraying for the first time, clean the cavity. Add thinner to the gun pot and try to filter the inside of the spray gun to ensure cleanliness. 2.After each use, clean the air cap and nozzle in time (pour out the paint in the cavity first, then add the thinner and shake the spray gun while holding the trigger to try to let the paint produced inside the spray gun spray out) If the air cap is too dirty, soak the thinner for a while before cleaning. Be careful not to damage the holes on the air cap when cleaning, remember to protect the nozzle, otherwise it will affect the atomization effect. 3.If the range of product spray becomes smaller or becomes "spitting" after long use, the problem may be: First, there is not enough paint in the paint container to cover the lower entrance evenly. It is recommended to try after filling up with paint. 4. If the product's paint container leaks, please remove the paint container, clean it, and reinstall it. The problem can be solved. Package: 1 x Spray Gun 1 x 600cc Cup 3 x Nozzles 3 x Needles The given wrench may not be suitable. Please provide your own removal tool.
TrustPilot
2 周前
5天前
