Keyless2Go Replacement for New Keyless Remote 5 Button Flip Car Key Fob for Vehicles That Use FCC OHT01060512 (2 Pack)

Easy to cut and program. The buttons are a little bit too firm/ requires a little force when pushing but the range is nice and no issues so far.

Bought these for a 2010 Chevrolet Equinox. I had 1 fob that was still working to start the car so programming the new ones was super easy. I did not have to get keys cut. I just used a punch to remove the roll pin from my existing remotes and moved the keys over to the new fobs. All functions on the remote work exactly as expected. Great value here. Quality is great. Other than missing the Chevrolet logo on the backs, these look identical to the originals.

So I just want to say that this product and company are awesome! First the price was dirt cheap compared to what my dealer wanted to Charge, less than half of what one would have cost me. All functions work as they should and I got the keys two day sooner than projected.Also in hopes this may help someone in need, I completely lost my only and original key so this was a replacement not spare. The dealer told me to cut the key would be 20 bucks but because it would also need the remote to be programmed they would need to tow my vehicle to the dealership, program it and the charge would've been 150 plus. They said they had to do an on board programming that required it to be there unless I had another key which I didn't. So I called the local lock smith and told him my situation and he kindly said go get the key cut and I'll tell you how to program the transponder so at least the key will work, low on funds I was ok with doing without the key pad until I could afford programming I just needed my car drivable. Here's the steps he gave1 turn your ignition to on posiotion you will se the car and lock symbol. Leave the key forward for 10 mins the symbol will go away. Turn the key back all the way and repeat. Do this two more times for a total of three. So I did, the first two times the symbol went away but the third attempt after ten mins it didn't. So I gave it another five and still nothing. I took the key out put it back in and turned it and noticed the light was no longer on, wah lah! The key started the car. So happy. Well then out of curiously I hit the unlock button and sure enough it programmed everything!! Saved me so much money the dealer was bs'g me about when that's all they had to do. Hope that helps someone.

Great product for fraction of the cost to get an replacement at dealership. Just swiped out my old key and replaced it on the new fob. Programming was the easiest.

The pictures speak for themselves. I was able to use an eyeglasses repair kit for $3.99 to remove the plastic cap on the back which is glued on and the screw underneath. Once that screw is out, the entire thing snaps apart but is super easy to put back together with just a little patience. Took me about 10min total to swap the keys and program both of them myself! Once you do the first key, the second key is super easy! As long as you have the original key, you can use this to replace the remote part without having to get the blank key cut! It comes with the board and a battery already installed.To program: insert working key into ignition, turn to on but do not start for about 5 seconds, than turn it to off and take the key out.. next put the new swapped key in and turn it on. These key fobs basically program themselves and takes less than 15 seconds to do for free! There are YouTube videos to help with all of this as well! Do not pay for key cutting if you are only trying to get a new remote. The old key fits perfectly into this one and there’s no need to pull/hammer the pin out to do it! The entire key can be taken out as one whole piece with the pin still in it.

UPDATE: 04/16/2019 Completely DEAD! Useless key FOB! Now NO Longer a FOB, just a key, which intermittently might start the car? DO NOT waste your money on these. Buyer BEWARE!!Update: 02/21/2019 Received assistance and reprogrammed keys. They worked for about 24 hours and the buttons NO longer work again. Can start the car, but that is all. We have to manually unlock the doors with the key. At this point, I feel these are a waste of your hard earned $$. Consider purchasing elsewhere.Update: 01/22/2019 - To date, NO reply for assistance. Not sure what happened, but were working fine and stopped working. Basically an old school key to "twist unlock" and start car. NONE of the programmed buttons will work and I cannot seem to figure how to reprogram. Beginning to think a waste of money. Reduced to 1 star, since below "zero" unavailable?Update: 01/07/2019 - As of today both FOBS will start the car only. Neither remained programmed to operate the locks, trunk or remote start. I have been through the reprogram process several times. I have replaced batteries in both, but neither works now.Nice option for addditional/replacement for my daughters 2010 Camaro. Went to locksmith and they wanted $90 for 1st key and $40 for each additional key. Stopped in local GMC dealer and they were most kind to cut the keys for me. Programming was simple.

I was able to program the key myself and had a locksmith cut the key. Doesn't always unlock 1st, 2nd.... sometimes 3rd time. Always unlocks, but when it's raining or a blizzard longer opening time sucks.