Temptooth #1 Seller Trusted Patented Temporary Tooth Replacement Product

Absolute lifesaver. My temporary bridge fell out and I can't afford getting permanents. So I made my own bridge with Temp Tooth, eventhough the product is not sold for that purpose, as you can see from my photos, I brilliantly crafted my own bridge thanks to this product. It helps that I have the 2 stub teeth, but basically I used 14 beads for each tooth. I did one tooth at a time starting with the stub and worked my way across. The key to making a perfect bridge with this product is don't try to shape the tooth perfectly in your mouth, because you're going to do the shaping with a straight razor blade. Just get it to fit and get it the right size. The size and fit is the most important. Once you make the first tooth, put it in the freezer for about 30 seconds. That causes it to expand and solidify. Step 2, put the tooth you just made back in your mouth. If you did it right, it should go on the stub perfectly. Step 3, do the same thing for the other stub. Now you should have two false teeth that fit perfectly over your stubs. Now the fun part: creating the middle tooth and making the bridge. All you have to do is put the 2 false teeth in your mouth and hold them in place with your bottom teeth, then make the middle tooth and shape it between the outer 2 teeth. When you're doing this, make sure the middle one is somewhat hot so that it will stick to the 2 outer teeth. Also, make sure the teeth are in relative proportions to regular teeth. Remember, they don't have to be perfect at this stage, because you're going to make them perfect later with the razor blade. Now, once you got the middle tooth in between the other 2 teeth, pull all three out altogether slowly and make sure they stay together because they will be loosely stuck together. Take a tweezer and grip one end of the bridge with the tweezer. Then, dip the entire bridge in boiling hot water for 2 seconds. This will cause the bridge to stick together more tightly. Take it out, blow it real quick, and then immediately put it back in your mouth so that you don't lose the shape. Use your index and thumb fingers to press the front and back part together to get a tighter grip on your stubs. Also push on the part next to your upper gums to make sure that part is firmly against your gums.Repeat this step of putting the bridge in boiling hot water 1 or 2 times to make sure the entire unit is firmly stuck together. After each time, put it back in your mouth to reshape it. Now, put the whole unit in the freezer for about 30 seconds. This will cause it to solidify and expand. When you take it out, now you have a fully functioning bridge. All you have to do now is shape it to perfection with a razor blade. Just chisel two outer grooves to create the appearance of connecting teeth. And then cut away at the bottom of the bridge to create the appearance of the bottom of each teeth. If you get confused, you can look at a picture online of some teeth to get an idea of how it should look. The most important part of your chiseling is the bite. So if you have an overbite like me, you will need to cut away at the back of the bridge to give your bottom teeth room to chew. You may also want to cut away at the back of the bridge to give your tongue some room and to make it feel natural. If you did everything right, you will notice that the bridge stays in your mouth without falling out. However you will need some fixodent to make it hold all day for talking and chewing. To change the color, I soaked it in Lipton Black Tea for about 6 hours, and it came out perfectly like my other teeth. However, as you can see from my photos, the color will go away once you brush it. Anyway, what a lifesaver. I've talked to people in person and no one ever noticed the difference. This product easily saved me $3,000 that I don't have. Whoever made this product is a GENIUS!!! Thank you.

Hey there, I wanted to share something that's been a real game-changer for me recently! As luck would have it, thanks to genetics, my teeth haven't always been the strongest, and I'm actually on the path to getting some implants soon. But while I was waiting for that journey to begin, I had a bit of a dental emergency – one of my front teeth decided to make an unexpected exit! Talk about embarrassing. Naturally, I started looking for a temporary fix, and boy, did I try a couple of other products first. Honestly, they were absolute duds. I was left feeling pretty frustrated and wondering how such ineffective items were even on the market. I almost gave up on finding a good temporary solution. Then, I decided to give Temptooth a try, figuring it was one last shot to cover that gap until my official dental work could start. And let me tell you, I was genuinely blown away! From the very first attempt, it was incredibly easy to use and surprisingly effective. If you're thinking, "Can it *really* be that simple?" – trust me, it absolutely is! Here's a little trick I discovered: since my teeth aren't perfectly white, I actually added a tea bag to the boiling water when I was softening the material. It helped achieve a more natural, slightly off-white shade for the temporary tooth, which was a brilliant little hack! The process itself is super straightforward: you soften the material, sculpt it roughly into the gap (no need for perfection on the first go!), let it set for a few moments, then rinse it under cold water. Seriously, it's that uncomplicated. This product has been a true lifesaver for me. It's such a relief to have that gap covered and to feel confident smiling again while I wait for my dentist appointments. It's a temporary solution, yes, but it genuinely works, and I'm incredibly grateful for the peace of mind it's given me. If you're facing similar dental challenges, I honestly can't recommend giving Temptooth a try enough!

This actually works! I thought well Ill give it a go and if it fails so be it! I devised an upper molar tooth as per the instructions . I went back to my dentist for a cleanup and She said "what's that, where did you get it"> I said while I work on my implant strategy I have this temp solution, you shook have seen here face !!! Get it , it works and you may need Mohave a few goes until you get to right, and you can fie it down with a tools to make it fit well.

I bought this product because of all the good reviews. I didn’t use it for quite a while, and it did take a few goes to get it to work. The instructions said to melt the pellets material in very not but not boiling water. I tried this at first but nothing happened. The pellets remained hard and white. So I threw caution to the wind and DID use boiling water, which worked great. Putting the pellets in a small bowl with boiling water quickly caused the material to become clear - as per the instructions - and using a small fork I fished it out and easily moulded a new “tooth”. I did this 3 days in a row while I was waiting for my dentist appointment. On the first 2 days eating caused it to fall out but on the 3rd I ate pasta at a restaurant and it stayed in.

Une solution de secours à ne pas utiliser sur la durée il faut savoir etre assez douée et avoir le coup de main. Pas facile la 1er fois il faut avoir de la patience et la teinte est vraiment blanche...

Helped me in a embarressing situation . Temp tooth mould stayed in till I got replacement at dentist. Would say it was more of a temp . Don’t eat a curry with it in as it turns it yellow. 🥴 All in all a good temp. 👍🏼

It took 3 attempts to fashion a tooth which met all requirements, but this is not a drawback. Technique is refined on each occasion. Up to 25 pellets were needed to develop a tooth to fit the particular gap. The tooth clicks into place well, and feels secure. The tooth still feels comfortable after 3 hours of wearing. Removal of the tooth will be interesting; it felt tight on last removal, but further trimming is pending. Matching is not yet perfect (white!), but drinking cups of tea should introduce slight yellowing. Overall, a brilliant product; appearance after fitting is good. The bite is excellent.