SKIL 14 Amp Plunge and Fixed Base Router Combo — RT1322-00

I’ve been using the SKIL 14 Amp Plunge and Fixed Base Router Combo, and it is an excellent router set for both beginners and experienced woodworkers. The plunge base is well-designed and smooth, allowing precise depth control, while the fixed base provides stability for edge work and consistent cuts. The digital speed-controlled motor is a standout feature, letting the user fine-tune RPMs for different materials, which improves accuracy and finish quality. Overall, this combo offers great versatility, reliable performance, and outstanding value for the price, making it one of the best router kits I’ve used in its category.

Good quality, easy to use and a great vaue. This works better than other routers I have purchased. It does a nice job and its easy to use. No complaints after a year of use. Oh, get the table too, it makes this thing cut smooth as butter with no flaws. Would buy again.

Great powerful router. I paired it with some Whiteside router bits and it cuts hard and softwood butter smooth.the dust collection is also quite good. The digital screen and settings are extremely helpful. I just input bit type, size and wood type (soft/hard) and then it gives me the correct speed that I should run on the bit. It also comes with all the peripherals (1/4" collet and edge guide) that are sold separately with other higher end routers. The cons of this router would be that when the product was delivered - the box was pretty beat up. I would recommend getting the amazon box to pack the router box for better albeit a little more protection. When i first used the plunge base it was a bit catchy where it wouldnt retract smoothly, but i suspect this might have been due to the rough delivery. After a bit of use the plunging became smoother but not perfect. At this price this is definitely a great, if not perfect router for a passionate hobbyist wood worker like myself. Would highly recommend.

There is a lot to like about this Skil router: it has electronic variable speed control with an easy to use programmable LCD, soft start, both fixed and plunge bases, 14 amp motor, 1/4" (using adapter) and 1/2" collet, three LED lights that turn on and off automatically, vacuum attachments for both bases, and an edge guide that can be attached to either base. Also, both bases can be attached to a router table and the height adjustment can be done from the top of the table with a special tool. I looked at Bosch, Dewalt, Ryobi, Makita, Porter-Cable, Metabo HPT (formerly Hitachi), Kobalt, Milwaukee, Chicago-Electric, etc. and this one had all of the features that I would ever need for DIY projects without forking out over $200. However, there is some confusion about it as well. The first issue that I encountered with it was when I tried to use a Porter-Cable style template guide bushing and was astonished when the bushing would not fit (see photos). The center holes in the plastic sub base plates on both the fixed and plunge bases are slightly too small for the 1-3/16" diameter bushing to fit properly. Apparently others have experienced the same issue and some reviews go so far as to state that the sub base plates were not designed to work with template guides. I’ve spoken with Skil’s customer service and they were not much help either. I was this close to returning the router because the particular project that I’m working on required a template guide and there was no other option. I looked at aftermarket base plates like Powertec, Rockler, and many more. The problem is that this router is so new that none of the aftermarket base plates list this or any other Skil router as compatible. That is, until I did a google search of the numbers printed on the fixed and plunge base plates. It turns out that Skil must be using a crappy mold from an old Sears Craftsman router to make the sub base plates for this router because the numbers match part numbers for the 315 175 040/050/070 Sears Craftsman routers. I purchased a Powertec 6-1/2" Universal Router Plate (Model No. 71369) and as you can see from the photos, the screw holes line up with the hole pattern ‘D.’ This makes it much easier to use Porter-Cable style template guide bushings. However, there are a few small issues. First, if you use the Powertec plate on the fixed base and want to use the router’s vacuum attachment, then it will not work properly because the provided Skil sub base plate has six ~1" holes around the center hole that allow the wood chips to be pulled into the vacuum, whereas the Powertec plate does not have these holes. Second, if you want to use the Powertec plate on the plunge base and utilize the flat edge of the base to follow a straight edge, then you won’t be able to because the Powertec plate is round. Of course, one option is to buy two of the Powertec plates, one for each of the router’s provided bases, and just cut off the excess part along the flat edge of the plunge base. Another option is to simply make your own custom base plates. However, I found that the sub base plates that come with the router will work with Porter-Cable style template guide bushings with a little effort. The way that I get them to pop into the center hole is to take the plate off of the base, put the bushing in the hole, place the part of the bushing that sticks up (see photo) down on the edge of something flat and rigid (e.g., edge of counter top), and then gently push down on the plate until the bushing pops into the plate. I was able to do this with the sub base plates on both bases with each of the template guides that I bought (as a set) from Harbor Freight Tools (see photos). I have to say that I am quite pleased with this router and highly recommend it to anyone looking for the most common features of modern routers without breaking the bank. I recently used it to cut some very precise and clean notches in a beam that I am building for a swing set (see photo). I needed the notches to be within a 1/32" and the router did not disappoint. I plan on buying an Amana 3/8" collet adapter so that I can use some 3/8" shank bits and making my own custom base plates. I’ll update this review when I do. Update July 27, 2020: I have a few 1/2" shank router bits and have not had any problem with them fitting in the 1/2" collet. I don’t have digital calipers to show you the exact size, but so far this has not been an issue for me as it has been for other reviewers.

I've used them all Triton, Dewalt, Bosch, Makita and yet I buy my 2nd 14 amp Skil router (mdl 1322) Why? because the extra features that come with this router along with the power and stability. I have yet to have a problem with this router. Skil has come along ways to compete with other big name routers such as I listed already. Face it you know as well as I do that you are paying for the "name" on some of these products. In my view I am getting a quality product for a good price with features that don't exist with the some of the other products. Like 14 amp power, LCD speed control, Electronic feedback, Soft start and live tool indicator, LED lights that light up the area where the action is. By the way I'm still using my 1st 14 amp Skil router the 2nd one I have dedicated to my linear table sled and for larger bits. It's very comfortable to use.

I have no doubt that this router package is a quality product with excellent features. My first effort to use it was met with an immediate disappointment. I tried installing a 1/2" round over bit and to my surprise I couldn't. The base plate opening being too small to accommodate its largest diameter. I use several round over bits and the 1/2" is nearly the smallest. Does anyone know what additional base plates will fit this router? Found a Milescraft base plate that fit which has a larger opening for the bit. Very happy with my purchase.

Solid chunky build quality. Amazing considering the price, this feels way more premium. Operation is smooth and powerful, handling is comfortable. Great product, well recommended

This is a great beginner and advanced router if you are on a budget. I am a woodworker and I would use this over many HD brand routers. It is powerful and it is adjustable, which is good. The plunge base works very well for juice grooves on cutting boards, sign making or anything else you would need it for. I’ve had it for over a year now and it’s still running strong and good.