LϟK 6 Pack Apple Watch Series 9/8/7 41mm Screen Protector & Apple Watch 40mm Series 6/5 Screen [Upgrade Soft Film] Self-Healing Flexible TPU Film Ultra-thin Screen Protector for Apple Watch 41mm, 40mm

This was by far the best application I’ve ever had for a screen protector. I was very concerned about putting it on my watch, I’ve put them on my phone before and there’s always bubbles and it never comes out right. But the process of this was so simple and it came out great w/ no bubbles! I just applied it so I don’t know how it holds up, but you can hardly even tell that it’s there. The only issue I had w/ this kit was the fact that they sent me a slightly different ring to hold the watch when putting the screen protector on. The one I was sent was a square w/ a hole in the middle and was not sticky on either side (yes I did peel the plastic off) so I just kind of had to carefully hold the watch there. But other than that it was a great kit, very easy application, and it seems like a great screen protector

Easy install, good instructions and everything you’ll need to get it done. Almost invisible on watch face. Doesn’t interfere with the touch screen functions. Stays in place with no signs of edges lifting away from the screen face. Stays about as clean as the glass, so you’ll still be wiping it clean if you’re fussy. I use an eyeglass cleaning rag and no cleaner-works great. Holds up to common everyday use well. It adds no shockproof value, it protects the screen from scratches. Getting it wet has not caused any issues. No bubbling even in Florida heat. Good buy.

Easy to put on came with everything I needed. The stand to hold the watch is perfect for applying. Let it sit about 24 hours then put on the bumper and looks clear.

After trying a few different options with my first Apple Watch, this brand became my favorite, because it works well, it has always protected my screens perfectly, and it's completely invisible and unobtrusive.My only peeve is that they tended to degrade and start peeling and falling apart after about a month or so.I have no idea what, if anything has changed, but with the last box that I bought, the film is now very noticeably more durable, but by far. This is now lasting months, staying scratch-free and perfectly transparent. And although I have accidentally hit or rubbed my watch's face against a wall more than once, neither the watch nor the screen protector have suffered the slightest damage.This is really great!

Easy to apply, transparent, able to use the watch effectively, but after a month, the application is starting to peel away at the corner. I don’t sleep or bathe with my watch.

I’ve tried other screen protectors, and this one has been my favorite easy to apply and gives an extra level of security against scratches

Update to review: Changed to 1 star from 3. Although I was able to ensure I had no bubbles etc when I put on the screen, within 2-3 days the corner is tearing up already. Just doesn’t work for what it needs to. And will be returning.Original review: It did not come with what was shown in the picture. It had the screens but it came with a white rubber square to help hold the phone in place while installing instead of the yellow sticky circle as shown. The square did not hold it in place at all. The video to help install (as it comes with zero instructions) also showed a screen protector with different color stickers so when I attempted to follow the directions of which numbers to pull first it was put on differently than what I received. Which meant I had to figure it out on my own. I got it on ok I think but having mine match up to theirs in the video would have made it easier. I assume what is shown in the picture is an updated one and I received the old one? I gave it 3 cause the screen seems to work but it would have been nice if they sent what they advertised.

This screen saver looks like it will protect my Apple SE fine. I has also installed a clip-on style protector for extra protection, and they work fine together. I did not have any problems installing this (went right on my first attempt), and the edges are sticking fine after several weeks. In fact, one of the clip-on protectors I bought catches on the edge of this saver when I remove it, and it's nicked the film edge a little bit...and the edges have not pulled it away. That's about as good a test of adhesion you'll get.I have 4 tips:1-The installation video url provided with the product is a dead link. Just search on the provided url in your browser. The current link will come right up in the results.2-Do not remove the band from the watch. There is no need to do so, and you lose the only way you have to hold the watch secure. Next time I will use non-permanent painter's trim tape and tape down both sides of the band to the table to secure the watch in the provided installation stand. I have no idea why they tell you to remove the band.3-Clean the entire watch face with the alcohol swab, including all edges of the screen and the entire circumference of the bezel. I think that some of the "peeling edges" issues may be due to improper cleaning of the entire surface...the film wraps down & around the screen, it does not just sit on the top.4-After the screen is installed, the video tells you to press the film down around all the edges. There's a specific "pulling in opposite directions" process. Due to the "peeling edges" comments here, I spent a lot of time doing this. I then used a cleaning cloth and went over the film many times, pushing it down and paying particular attention to pushing down the edges over and over.I'm very happy with this product. And I got 5 spare films.

I recently purchased a 40mm Series 6 for my spouse and I'm frankly a little disappointed with this item. Although I am unable to test the film's staying power on the display, I had only an 'okay' experience applying the film. I'll get to that in a bit.Let's start with the fitting. The dimensions ought to cover the viewable area but its shape does not match the actual glass on the watch. Even if I were to give some allowance all around, the space above & below do not match the gap on the left & right; it at least ought to have a consistent gap running around the film. It doesn't and so it looks a bit awkward when examined closely.Because the shape doesn't match up with the display it becomes a pain during the installation process. It's challenging to line up the center of the film with that of the display, basically aligning 2 non-identical rectangles on top of one another without any reference point. The film has some guides across its middle (left-right) which helps, barely. After removing the film's plastic, you then notice the odd gaps and also how rough the edges are, as illustrated in the photo. There might be a tiny bit of dust but that's the film that's not trimmed properly. A laser cut should have those super-clean but they're not. It makes the watch look like it's been inside a dust cloud. The photo is of a new watch taken out of the box only about 5 minutes before the film application. It's to be expected that there is some dust to show up after factory assembly so any pre-existing dust was already lifted and cleaned as part of the pre-application steps outlined by the video.It's pretty sad that to hide the ragged edges and mis-matched dimensions I'll have to get an outer case to hide the edges. The small upside is the case will add to the watch's protection. Bad fit and bad cuts each get a 1-star deduction from me.

Fácil de fijar, ni una burbuja

Die Folien passen sich gut der Uhr an und lassen sich sehr leicht anbringen

Pas mal, se met facilement (j'ai eu quelques bulles au début mais au bout de 1 ou 2 jours elle sont parties) et surtout c'est invisible ! Ca protège contre les petites rayures mais pas contre les chocs par contre ! très bon rapport qualité prix

No es tan complicado de colocar si se visualiza el video y no se nota. Se ajusta perfectamente a la pantalla y los bordes no se notan.