Cap Barbell A-Frame Dumbbell Weight Rack | Color Series

This is very sturdy and easy to assemble! I was so tired of my husband leaving the weights all over the floor so it is a great way to organize your weights. Its small and takes up very little room compared to having the weights sitting all over the floor. It is worth the money in my opinion!

As advertised. Strong, sturdy, easy to assemble and use. No more stubbed toes! A good, affordable option for organizing your workout space.

Pretty sturdy, not gonna tip over unless you really give it a shove. Seems to hold the weight good. Decent quality hardware, the metal used on the screws is decently hard so it doesn’t strip easy and you shouldn’t have to worry about over tightening. Did some good searching before pulling the trigger and I’d say this is about the best “bang for your buck” on amazon. The top two slots are pretty close together and bigger weights will not fit, my smallest (15s and 10s) do not fit. Good excuse to buy some 5s for uh idk, but good excuse. The space between the hooks, where your hand would go to pick the dumbbell off of the rack, is a little narrow. I can just barely fit three fingers. Assembly was very easy! They included an Allen wrench, unfortunately they did not include a wrench for the nut. So keep in mind you will need your own 1/2 in. wrench.

Easy to put together. Very sturdy

I purchased this to organize my dumbbells. Prior to this I had them all in a bin and it was very annoying to locate the ones I needed. I got this dumbbell weight rack in the color green - it is a very nice lime green which I am very happy with. Warning that it does have a weird smell when you first open it. Assembling this was relatively easy. I actually referred to a YouTube video (titled: CAP Dumbbell rack Kit with 150 LBS of Dumbbells ....AMAZON DEAL) to make sure I was doing everything correctly, as the directions included are not super clear. You WILL need an adjustable wrench to assemble this; you will not be able to tighten the nuts without a wrench. Use the adjustable wrench (not included) to hold the nuts in place, then spin the screws with the included Allen Wrench until tight. Or vice versa, hold the Allen Wrench to keep the screws in place and spin nuts with the wrench until tight. There is one extra washer included. Currently I have all of my dumbbells from 2lbs to 10lbs. Even the small 2lb weights fit perfectly. At this time I do not have anything heavier than 10lbs, but it appears that there is more than enough spacing on the rack to store the dumbbells! I also appreciate that these come with a rubber liner to hold the weights - these are already installed on the rack, no need to assemble them yourself! Overall I find it to be very sturdy, compact, and does exactly what it's supposed to do! Also if you're like me, you might be wondering if you can store stuff under the A frame... while there is a bar across the bottom, it doesn't stick up very far. So you can store things under there like heavier weights, shoes, accessories, etc. Overall very happy with my purchase and included pics of the green color! I love it!

1. Sturdiness and Durability The Cap Barbell Dumbbell weight rack lives up to its promise of being sturdy. As someone who values safety during workouts, I appreciate the solid construction. It confidently cradles my dumbbells, whether they’re 15 lbs or 20 lbs. Even with heavier weights, I haven’t noticed any wobbling or instability. 2. Aesthetic Appeal The sleek white color of the stand adds a touch of modern elegance to my home gym. It seamlessly blends with our decor, creating a clean and inviting workout space. No more eyesores—just a minimalist design that complements any environment. 3. Practicality and Ease of Use Setting up the dumbbell stand was straightforward. Minimal assembly required—always a win! The stand’s compact design doesn’t hog precious floor space. It’s like having a designated spot for my dumbbells without sacrificing room aesthetics. 4. The “Distance Between Hooks” Quirk Now, let’s address the elephant in the room—the distance between hooks. While the stand accommodates various dumbbell sizes, I share your concern. Sometimes, when placing the dumbbells back, I’ve had a close call with my fingers. It’s not a deal-breaker, though. A gentle reminder to be cautious while re-racking the weights does the trick. 5. Price Point and Quality Considering the affordable price, this rack delivers excellent value. Sure, there’s room for improvement, but it’s a minor trade-off. The built quality compensates for any minor inconveniences. Plus, it’s a small price to pay for keeping my dumbbells organized and within arm’s reach. 6. Final Verdict In summary, CAP Barbell dumbbell rack is a reliable companion for your strength training sessions. Whether you’re a seasoned lifter or a beginner, it ticks most boxes: stability, aesthetics, and functionality. Just remember to mind those fingers during re-racking! Disclaimer: This review reflects my personal experience, and individual preferences may vary. Always exercise caution and follow safety guidelines when handling weights.

This rack works great; holds my 5, 10, 15, 25, 35 pairs just fine. However, the rubber-like feet give off bad fumes for a long time (VOCs?). I left this rack outside for 3+ weeks to air out and it still smells noticeably after bringing it in. Looks like it'll be another 3 weeks...

This is a nice rack to hold my dumbbells. I have a set of 10, 12, 15, and 20 pound neoprene weights. This rack has protectors on each shelf to help prevent the handle of the weight from getting damaged and it kinda works for the neoprene weights. I’m extra careful setting them on the rack. If you aren’t, the rack will tear up the handles of the dumbbells and ruin them. I’ve thought about putting some thing else on there to help protect them but haven’t got around it. Other than that, the frame feels sturdy and has held up just fine for the 9 months I’ve owned it. It was super easy to put together and doesn’t take up too much space. It was a good price for what you get.

I spent WAY too much time looking at different small barbell rack listings on Amazon and elsewhere. Many look shoddily built, too small, too big, no rubber grips to stop scratches - and worst of all, the reviews are so contradictory and confusing. I narrowed my shortlist to 3-4 items, but NOTHING, not the listings, nor the reviews told me what I really wanted to know. In the end I chose the "CAP Barbell Black A Frame Dumbbell Rack" because; - First off this rack is super easy to assemble & very stable (unlike many reviews say). All you need is a spanner, or best a socket wrench (have), and it took me less than 10 minutes, fully done. - I have 3 sets of 10kg, 12.5kg & 15kg Dumbells (~22/27/33 pounds) - so I wanted a 3 to 4x rack (this one is 5x). - It's well balanced, has a wide base, so is rock solid and it's specs say it holds 91kg (200 pounds). I have 75kg on it, so could add 2x 7.5kg and be under spec - and it's easily strong enough to hold a pair of 20kg, so 115kg (over spec) so it's very stable & strong WEIGHT wise. SIZE wise (as in Hex head) is trickier. - Those are kind of medium weights for an average Man, heavy for a Woman. So they're kind of larger hex heads - so the spacing between each "hook" is important. AND THAT is what I couldn't find anywhere. - Many reviews are by Women, and they say it's hard to assemble (it's not) and sometimes for little "chick's" neoprene colourful weights they don't fit and so on...or sometimes reviews are by Guys with HEAVY weights - like 20kg, 25kg, and those suckers have BIG hex heads, so they won't fit so well. - But if you're like me, and you have, say, 5kg, 7.5kg, 10kg, 12.5kg, 15kg & even 20kg large rubber head (just, especially if you only have 3-4 sets, depending on weight/size) hex dumbbells, this is a great rack. - The sizes I mention I have aren't too big - they JUST fit. But above that, you need a much bigger style of rack. This is a budget, cheap, $60AUD rack, and it works great for my small home gym. Probably also totally suitable for the smaller, candy coloured "chick's" weights. - Another problem people mention is not being able to fit your hand in between to lift the dumbbell out. I have smallish hands for a Man, and I can (just) do it for 10kg, but heavier, no - BUT that's not how you should lift heavy dumbbells out anyway - my 5th photo shows how you're meant to do it with two hands. --> FINALLY here is what I COULDN'T find ANYWHERE (for any racks!). My 6th photo shows what I suspected...the "gap" between each "hook" gets smaller as you go up. So my 3x dumbbell sets fit fine on top of each other at the BOTTOM. But at the top/they don't fit! As you can see I spaced them out anyway. My pic 6 shows with a tape measure, and they lose 2cm per "hook" as you go up. Hope this helps save some people time. But unless you have really heavy weights, I recommend this as really good home gym dumbbell rack.

Item came well packed, with an instruction sheet. The instructions are nowhere near lego quality, but if you have assembled stuff before, it is not rocket size. Took me about 20 mins to carefully self assemble it. If you have 2 persons, can be done in 10 mins. Need a wrench (not included) and Allen key (included). All in, very stable shelf with tiny footprint. If your hands are large, you may find it a bit difficult to take the dumbbells out due to the width of the holder, but overall I am happy with the purchase. I am fitting this rack with a pair of 8 , 10 , 12, 15 and 20 lbs. If you have significantly heavy set of weights from 16 to 40 lbs, this rack will not fit, as the dumbbells will be too big for the vertical space it provides. Hence, i would say, if you have 5 pairs, starting with 6 - 8 lbs and ending with 25 lbs, it should fit fine! After using this for 2 weeks, I realised that you CAN actually fit 20 to 40 lbs dumbbells, if you like. However, you will probably be able to fit just 3 pairs (not 5 pairs), leaving the alternate 'row' free.

外国の方のレビューで、幅が小さくは見えるが取り出しやすい幅が確保されているとのレビューがあり、ヘックスダンベルにはコンパクトで丁度良いかなと思って購入したが、真ん中下の二つの柱をつなぐ細い支柱のネジ穴の左右のずれがひどく、高重量を扱うにしては組み立てが怖かったので返品した。また、手の入る隙間であるが、やや手が小さい自分の手をもってしても、かなり幅が狭い印象なので、ここから取り出して直ぐ筋トレするというよりは、一旦別の場所にダンベルを慎重に取り出してトレーニングする必要がある。金属製品のネジ穴のずれは海外製品に良く見られる難点であり、このあたりは個体差もあるかもしれないが日本製をお勧めする。

For the price it’s unbeatable. As stated by others this rack is mostly for smaller weights but I managed to make it work with pairs of 15kg, 12,5kg, 10kg and 7,5kg. The bigger weights are a little difficult to get in and out but it still works.

Très très bon!