Primefit PCKIT26 Air Piping System, 26-Piece Air Push to Connect Kit with 1/2-Inch (OD) / 3/8" (ID) x 100-Feet TPEE Tubing

I don't usually do reviews but I am so satisfied with this product that I needed to write a review. It arrived early and it went together exactly as it was supposed to. No missing or defective parts. Took about an hour or 2 to get it up and running. No leaks at all. Quality of the materials was great. I didn't need all of the tubing but everything else was great. Plan your layout ahead of time and this was really easy to do.

This is a really nice kit. I had no leaks. Yes there is quite the memory from being wound up but I just heated it with my heat gun and stretched it out to make it lay straight...ish. Overall, great product and the price is very good too compared to other places like Pincess Auto.

The pieces fit well and have not had any leaks that I can tell. The tubing is pretty rigid and comes looped. As others say, it will not straighten out on its own. I bought small clips that Amazon suggested. The clips are essential if mounting on a wall. I ran some of it through conduit where there was no wall to mount. The cutter works well, making clean cuts. I ended up not using the manifolds, so cannot comment on that. I wanted to use metal pipe in my shop but this have worked well as a much cheaper alternative. This was used to make 2 runs from 29gal compressor in my small hobby wood shop (500 sqft), and had some left over.

The quality of the kit is excellent, push fittings work well. The only issue I have is there is a lot of 3/8 holes and only 3 plugs...had to run to the store to get more items to finish the job. But over all I'm very happy with the kit.

Was very easy to install overhead in my shop. The included tubing cutter worked surprisingly well. Just be sure to pull back on the collar when putting the hose into the quick connectors and seat them all the way. Then a sharp tug and they're locked i tight. I would recommend some quality thread tape made for pressure systems ( I used the grey tape) but I'm sure the yellow type for gas lines would work as well. I'll be adding more drops in the future. Oh yeah be sure to get the proper brass adapters if you're air hose has 1/4" npt fittings (most do) you'll have to step down from the fittings in this kit. And you're also going to need clips to secure the hose as you route it. I purchased half clips here on Amazon, very well priced and they nailed up in the rafters easily.