FLEXISPOT EN1 Essential Adjustable Height Desk Electric 40 inch X 24 inch Whole-Piece Desktop Small Standing Desk Ergonomic Memory Controller (White Frame + 40 inch Mahogany Desktop)

Picked up the FlexiSpot EN2 Standing Desk and it honestly leveled up my whole setup. Super sturdy—even with dual monitors, PC, speakers, all that. Plenty of space and the finish looks clean. The standing feature is solid. It goes up and down smooth, and even at full standing height, there’s barely any wobble, which I was worried about. and its super quiet! Being able to adjust the desk makes things so much more comfortable! Also gotta give them props—the shipping process was great. They kept me updated the whole time, which I really appreciated. Setup was easy, no headaches. Overall, it just feels like a reliable desk that does exactly what you want. If you’re thinking about getting a standing desk without spending a ton, this one’s a great option.

I got this desk for my garage workspace for my 3d Printer setup. Desk is beautiful, very easy for me to put together, used the hex tools included and my electric screwdriver when necessary. Everything is pre-drilled, except for a few items which are accessories, which allows you to place them where they work best, like the cable management, which is smart. My printer is the Bambu A1 and I barely feel any vibration, and no vibration on the legs. I had specific size needs for the space I was using. I needed a larger desk (55 inches Length) to fit the printer and have some workspace and this desk fit perfectly for my 3d printer work space. Bambu A1 with enclosure needs space and I wanted a desk that was 30 inches deep so I have plenty of room for printer and enclosure. Also height was an issue, so this desk because it is adjustable goes as low as 28.1 inches so I have room above for a shelf. All of this with my AMS lite to keep clean as my workspace is a garage. I must have researched 50 desks all over Amazon and the web. Went to stores and was looking for the perfect desk for my needs: The Flexispot hit on every need, and then some. I hope this helps anyone out there looking for a desk for your office or workspace for 3D printing. (they also make a 48" version). 1. Build Quality- this one is strong and stable. Once all put together it is just heavy enough to work perfect with a 3d printer set up. 2. Stability: Very stable, and very little vibration felt on the desktop, and none in the legs. 3. Quality: Top of the line manufacturer of desks. I have a smaller EN1 in my office and this desk is made to last and the quality is the best on the market in my humble bumble opinion (lots of hours of internet researching & including going to look for desk at 11 furniture and office supply stores. 4. Looks: My garage looks so nice with this desk, now I have to paint and start cleaning up (the desk is making me do this as I think it embarrassed by the mess. LOL). 5. Warranty: 5 year on parts and frames, motors and other mechanical devices, and a 2-year warranty on controllers, switches and electronics. 6. Ease of Assembly: 39 minutes from start to finish. You use the enclosed hex tool, for 95% of the assembly. There is one part on the lets that you will need a electric screwdriver or drill ( I did not want to drill through my desk so I just used my electric screwdriver a pressure and the screws went right into the wood. 7. Happiness: Scale of 1 -10 being so happy I could dance? 11! Amazon Delivery was next day for the desktop (all one piece) and 2nd day for desk. They let me know it would come in two parts, which was fine. Also kudos to my FedEx driver, who saw me struggling to move the desktop to the garage from front door and ran out of his truck, grabbed it and placed in my garage for me very carefully. Next day he put the desk part right by the door, (thank you FedEx and to my sweet delivery person).

So far so good. Quality is good and looks amazing when fully assembled. I had no problem assembling it, all the tools were included and step by step guide was easy to follow. The wire tray helps get rid of all the wires on the table and now I have only one wire going into the plug. The motor operates smooth. It is easy to adjust the hieght of the table to your liking. It came with a strip but i didnt ue it, instead I used my own (not sure if the included strip is surge protected). The clumps are helpful to manage the cables. The alignment of the table is good. It is not very scratch resistant and durability is ok. It is easy and comfortable while working, standing or sitting.

I’d been debating switching to a standing desk primarily to have a higher desk where I wouldn’t have to look down at my lower screen when sitting in my chair. This not makes working at my computer incredibly comfortable, I now have the ability to stand when I’m working for extended periods of time. When it comes to delivery, expect the courier to end up leaving the boxes at the bottom of any stairs to might have up to your door. Mine were left at the garage (that’s just a note, I’m not upset and was more than capable of bringing them inside but the boxes might be heavy for some so just keep that in mind). Assembly was honestly a breeze for me. All of the components are sturdy and don’t feel flimsy of cheaply made. The instructions were detailed and it took me maybe 20-25 minutes to put together once the boxes were unpacked (I did have my impact driver which id say is needed for the screws that mount the base to the table top). Overall it’s a great product for the price. The only reason I gave 4 stars instead of 5 was because the right corner came slightly chipped/cracked, but it’s not enough of an eye sore to take it all back apart to replace.

The desktop and the desk base components arrived extremely well packaged with no shipping damage whatsoever. For those who are reading the reviews complaining of stripped screws... The problem is not with the screws at all. The problem is that the assembly of this desk actually should not be done using a power drill. That is what is stripping the screws. I assembled this desk using only the tools provided. I did not use a power drill at any time. I'm 74 years old, I am female, I am also disabled with hands and strength that have diminished. And I was able to assemble the entire desk, including the cable management apparatus and the two hooks provided. A 74-year-old knows how to use a thin nail and lightweight hammer to create a bit of a starter hole for a screw and the absence of a pre-drilled hole. Avoiding using a power drill will ensure that the assembler will have no problems with stripping screws. The assembly instructions are very well written, they are logical. If you proceed slowly and carefully you will end up with a desk that is solidly put together and raises and lowers smoothly without any problem whatsoever.

Putting things together takes a bit of time, not to mention needing to flip the table once constructed. Motor and rod can be a bit hidden rather than exposed. Similarly cables (controller to motor, power socket cable to motor) are just badly exposed, could do with a bit of covering. Structurally very solid, no wobbly going up or down, able to hold heavy objects. Safety stop detection works well, it will stop at impact. Controller memorise settings well, very handy to use any presets. Very satisfied

Happy with the product

Great quality desk, very happy with this purchase

This is the perfect home office desk

Really great desk. Enough space for two monitors and lap top side by side and still have enough room for keyboard and mouse etc. Had it for nearly two years now and it hasnt missed a beat. Great quality. Easy to used.