ELEGRP Occupancy Motion Sensor Light Switch, PIR Infrared Motion Activated Wall Switch, No Neutral Wire, Single Pole for CFL/LED/Incandescent Bulb, with Wall Plate, UL Listed (10 Pack, Matte White)

Works as expected. Easy to install.

The motion sensor is fast enough and the timer to turn it off is a big plus. The installation is simple, just keep in mind it requires neutral. The key is not the most sensitive, you have to push it stronger than a common switch but not a big deal. Recommend it.

This is a great product and fairly easy to install. We love the one we installed in our laundry room. You can easily adjust the sensitivity (how close you have to be to set it off) and the time-out. We set ours for 5 minutes , but you could just as easily set it to time out after 30 seconds and be fine, because it will stay on as long as there is motion in the room. The installation tutorial video is super helpful. However, you MUST have a ground wire for the switch to function. I know it seems like a given, but check your switches first! We just assumed that would be universal throughout our house and ordered a pack of 6 without even thinking to check first. We were so pleased with the one we installed in the laundry room, but when we tried to install in a couple of other high traffic areas in the home, we discovered that whoever wired the house before we bought it cut back all the ground wires. They were too short for even a professional electrician to pull them out to connect to the switch. The electrician said he doesn’t know why some people do that, but they do, and these switches HAVE to have a ground wire or they won’t function as a motion sensor. So now we are stuck with the 5 remaining switches that we can’t use. :( Definitely not the fault of the product or the company, just something to consider before ordering!

EDIT: I’m adding a star to this review because the support team of this product was prompt in reaching out to me and trying to remedy the situation. They still don’t work in 3 way applications but I stand behind my recommendation for this product for single pole applications and now you also know that they have a stellar support team.Our electrician was not able to connect it on a three way application where you have two light switches controlling the light (like one down the stairs and one upstairs). He tried for more than an hour, all possible combinations but couldn't get it to work.They work GREAT on a single pole application though, so if you need a great looking switch that is motion sensitive and very reliable for a single pole application I highly recommend them.

I put these on my stairway to the basement, in my kitchen, pantry and bathrooms. All the lights that the kids tend to leave on! They work great. You can adjust how long you want the light to stay on after it detects movement. You can also block off a specific time where you don't want it to come on unless you manually turn it on

I bought this switch to make it easier to turn on the light going into my dark garage.After wiring it up it didn't work. The instructions said that if that happened to simply exchange the load and lead wires. That sounded strange to me, so I got out my multimeter and checked for the Hot lead, and sure enough, it was reversed. So I changed the wires and now it works great.I recommend that you just test the wires before you install so you are sure which is the load and which is the lead or hot wires.

These are like any other motion sensor device: if you stand still for a bit the lights go out. The sensors have the typical options, light and motion sensitivity, and duration. also they can be switched to a vacancy sensor (the light is manually turned on and automatically shuts off). I outfitted most of the rooms in my basement, so needed a bunch of these. Install is pretty easy. The largest negative is the amount of packaging but that seems to be typical today. There are very small screws that can get away from you.

This specialized lens divides the field of view into sensor zones, allowing the sensor to detect human motion and switch the lights on when someone enters a room. This feature makes it an excellent option for those who want to save energy and reduce their electricity bills.One of the most significant advantages of this product is that it does not require a neutral wire, making it ideal for homes of all ages. The installation process is also quick and easy, with the product being able to replace an existing switch or sensor in as little as 15 minutes. The ultra-slim profile and frameless design make it a stylish addition to any room, while the tough thermoplastic housing can shrug off impacts and scratches.The ELEGRP motion sensor switch is versatile, with the ability to work with 300W LED, 300W CFL, and 600W incandescent light bulbs. It also features multiple setting modes, such as Automatic or Manual ON/OFF, for different usage scenarios at home. However, it is not suitable for a 3-way circuit.Overall, the ELEGRP motion sensor switch is an energy-saving and long-lasting product that is easy to install, looks great, and has a variety of setting modes that make it perfect for different usage scenarios. We highly recommend the ELEGRP motion sensor switch for anyone looking for an innovative and practical lighting solution.