ApplianPar Front Driver and Passenger Side Stabilizer Sway Bar End Links for Honda Accord 2003-2012, Crosstour 2010-2014, Acura TSX 2004-2014

Good for my Honda accord exl 07 v6 3.0

Great quality parts. Great prices

These are half the cost of the Moog end links which is why I bought them, and why I would recommend them. However note the design is similar to the terrible stock design on the accord end links where you need an allen wrench to hold it in place while you tighten/loosen the nut. These use a torx wrench, which should in theory work better for not causing slippage. But if these rust the same way the stock ones do, which I suspect they probably will, they could be a huge pain to remove in the future. Moog uses the better design, but at x2 the cost for a part I dont plan on removing remove again, I think this is a perfectly acceptable option.

Fit my 2004 Honda Accord just fine. No issues

Good product works as they should

Needed new ones as my car had hit 260k miles and wanted to take better care of it. Since mine were so worn and rusted it was a pain to replace this. I spent less time replacing the lower control arms then I did replacing both of these! But if you need them and you are doing your suspension. Don’t be cheap and just get them.

taking the old ones out were a pain in the azz because of the little space that was available on my 2010 Honda accord lx-p but installation of these sway bars links were really easy to install , my old sway bar links were torn so I replaced them but I was also hearing a clunking noise near the sway bar links and if your hearing the same definitely look into replacing the sway bar bushing it solved the bad clunking noise I would hear

The nut stripped at 1st time and never reach 33 ft-lb tightening.Took me 2 more hours to take it out for return, otherwise I would cut it.