Ade Advanced Optics RD3-006B Reflex Dot Sight with Picatinny Rail Mount – Compatible with Doctor / Vortex Venom / Burris Fastfire Footprint – Compact Dot Optic, Green or Blue Dot, Black or Tan

This Optic was a direct mount on a Doctor cut PSA Dagger Compact. After direct mounting the site using the rubber dampener then the optic on top, laser sighting it in and locking down the windage and elevation screws I'm happy to report 200 rounds later of 124 grn 9mm grind hard ammo the site works perfect. Never lost zero or malfunctioned, and It does co-witness with iron sites. Very surprised for the price this thing even worked and the brightness levels are perfect. I highly suggest using the supplied rubber mount and be sure to tighten down the windage and elevation screws after sighting it in. Just ordered another one for my other PSA Dagger Compact Doctor cut build. Cheers.

It does fit on a vortex venom base and you must use the screws that come with the vortex if you don’t have an optics cut on your pistol. So far it’s holding a zero. Other than that it mounts pretty good but the screw that come with it are short. No blemishes or anything like that and it comes with almost everything you need which is great. The only thing that sucks is the dot still looks pretty blurry but that’s only because I have astigmatism and no fault of the producer. Looks and feels great and I love the little dust cover

Item looks good and works, but does not fit on the slide it is designed for. Slightly too large and unable to mount as intended.

First of all, I'm new to firearms. Less than a year. Have plenty of military and LEO friends who provide a wide range of advice and experience. That said, all discouraged me from "cheap" or "inexpensive" optics, such as the ADE brand. I watched several videos, read several reviews on this particular model (RD3-006B) and the evals were mixed. Decided at the price point, it would be a fine experiment. Green is easier on my eyes, hence this model. Installed a DPP titanium rear sight dovetail adapter on a Glock 19 with the included Loctite blue on the screws. Installed the RD3-006B on it (I don't think I used Blue though...) Zeroed it with a bore sight laser at 7. Made sure the elevation and windage screws were tight. Took it to the range (only have indoor in the area that's affordable for me). After 100 rounds, it held zero. After the second hundred, it had moved up just a tiny bit, I almost could not tell. Still able to put shots where I wanted well within a 3" area. Another 100 rounds and the elevation change was more noticeable. Still had shots acceptably were I wanted. Re-zeroed and fired strong hand, less accurate, but still pretty close to where I wanted. Fired weak hand...let's just leave it at that....Finally, for fun, sent it down 25. I can't see that clearly at that distance...but put 7/10 on the paper. Less of those were even close to where I wanted, but that's NOT the fault of the sight of course (nerf aging). All in all, for me, I felt it performed well for what I paid. I should recheck if I used Blue when mounting it into the dovetail adapter as that could account for the slight elevation changes. Never needed to touch the windage adjustment during use. The dot is easy to see. The adjustable brightness levels make is easy to find a comfortable brightness. I don't like the power button on the front, but that's a personal preference. Point is, be honest with yourself about your expectations. If you buy this at $70-ish dollars expecting the quality and performance of a $200+ Holosun, Sig, or a "Brand Name X" , YOU WILL NOT GET IT. If you buy the RD3-006B understanding it's NOT "Brand X" and will NOT perform as "Brand X" but WILL get the job done with maybe an occasional need to re-zero (a tiny bit), you won't be disappointed. In a year, with more experience, my view may change. However, with my limited experience with firearms NOW, it's a good buy in my opinion and I'm keeping it.

Seems to be of good quality and fits great. I haven't tested the durability as of yet but the quality would seem like it could handle just fine. Easy to turn on and off and the glass is clear along with the dot.

It was easy to install onto the gun if you already had the correct pieces or know it'll fit (I got this for my G2C). It fits great, easy to install. Downside, it wouldn't zero perfectly. I could only get so close to the boresight laser that I don't know what I did wrong. Could be me. Major downside, the light does turn off on it's own. It makes a useless CC EDC if it does that. I checked on it when I'm out and noticed the light is off after making sure it's on. So as I said, if you're looking for fun/plinking or something, then this is a good affordable option. As others said, there's turned off after a couple of shots in.

What a great pistol optic!! I recently mounted this on a Taurus TX22 for competition speed shooting. It's light, easy to mount and I love the five brightness settings. It's even easy to see in bright sunlight. Using it at last week's competition, I took more than ten seconds (about 20%) off my time when compared to iron sights. I was concerned adding the extra weight on the slide of .22 would not allow it to cycle properly but it proved not to be an issue at all. Due to the small window, it seemed like it took forever to acquire the dot for the first shot. I wish it were just a little bigger but that would add more weight and may affect the cycling of the slide. With a larger caliber, that may not be an issue but for what I need it for, my .22, I love it. Would definitely buy again.

Ok guys, seriously best bang for buck. I was questioning the quality of it since its a fraction of the price but I said f it, if it sucks I'll return. It. Guys, I love it. Took it to the range and oh wow! Once I set the sights, man this thing made my cz75 my favorite handgun out of my safe. I would definitely recommend

Fits the pistol perfectly! Easy setup and zeroing! Easy to see and aim! Remains zeroed when shooting! Rugged, I’ve dropped it, on purpose, and it is still perfectly zeroed!

This sight does excatly what i need of it and it was easy to install and easy to use

Le produit m'est finalement arrivé en excellent état, après une très longue attente et plusieurs remises de date de livraison. Je déplore le manque de suivis que j'ai toujours appréciésq chez Amazon. Mon colis a dû se perdre au USA et par la suite au CANADA à Mississauga. Point positif, je suis somme toute satisfait de ce article.

not working after a year. barely used