TP-Link Deco XE75 Pro AXE5400 Tri-Band WiFi 6E Mesh System - 2.5G WAN/LAN Port, Covers up to 7200 Sq.Ft, Replaces WiFi Router and Extender, AI-Driven Mesh, 6GHz Band, 3-Pack

The Deco XE75 Pro has been excellent. Setup was quick, the app is straightforward, and the coverage is strong and consistent across the house. Devices stay connected without drops, and speeds are solid even in formerly weak spots. It handles multiple users and smart home devices without a problem. It also works better than the Deco WiFi 7 in my experience, delivering more reliable performance overall. The range stays strong even about 50 feet away from the Deco unit, though in my experience it barely covers my 2000 sq ft townhome. Overall, it works great and does exactly what it promises, but coverage may vary depending on layout.

I am extremely pleased with the 3 Pack XE75 Pro I purchased. Note that the XE75 (non-Pro) has qty 3 1.0 gigabit ethernet ports, whereas the XE75 Pro has qty 2 1.0 gigabit ethernet ports and qty 1 2.5 gigabit ethernet port. That's the only difference between them. So if you aren't purchasing a 1.0+ gigabit ethernet port, you might opt for the non-Pro model. In my case, there was a sale on Amazon and the Pro 3 pack was the same price as a non-Pro 3 pack. I was using a Netgear Orbi RBK53 unit with 3 satellites, and while the performance was OK, I wanted to future proof my home with a more powerful wifi 6E router. I have a 1,820 sqft 2 story home which was built in 1991 before moving to mesh wifi a single router was highly inept at reaching upstairs, where my speeds would drop off close to being completely unfunctional. While the house is not that big, my lot size with front and back yard included is 9,000+ sqft. For that reason, I didn't think of the 3 pack rated for 7,200 sqft in the marketing specs as overkill because I wanted wall-to-wall coverage from the far reaches of the front yard to the far reaches of the back yard. I got it and then some with this system. Setup was unbelievably straightforward. You download the Deco app (more on that in a minute) first. Then you unplug your existing router if you have one and replace it with any of the three units. The fact that it can be any of the three units was somewhat novel to me, because the Netgear Orbi approach is different in that Orbi specifically designated one device as the router (I had the RBR50 router) and the other devices as satellites (RBS50 satellites is what I had). With Deco XE75 or XE75 Pro, each of the devices is a super capable wifi 6E router in and of itself, each capable of covering 2,900 sqft of home space with up to 200 devices connected. These ports are auto-sensing, in that you can plug the LAN ethernet cable from your modem into any of the three ports and the devices will detect the connection and designate that device as the router. After the router is up, the app instructs you to simply plug in the other two routers and they will be detected and added as satellites, nodes, etc. (each manufacturer uses different language) and added to the network. It worked just as instructed, and I was up and running within 8-10 minutes. After setting up the devices, I simply unplugged the two satellites and moved each to the designated spot I had decided on in my home. Once the devices power back up in their new location they are immediately added back. I pay for a plan with Xfinity for up to 400 Mbps download and up to 100 Mbps upload. When I plug ethernet directly into the router I typically get 475-480 Mbps download and 12 Mbps upload (I don't know why they screw me on the upload speed when the web portal says I should get up to 100 Mbps upload, but that's neither here nor there). After playing with the satellite position a tad, I was able to get 475-485 on wifi over nearly every single square inch of my property, Even if I stand in the far corner of my yard behind a large tree I am still getting 380 Mbps. Lastly, I'll mention that the app is fantastic and highly capable for novice and more advance networking setup. You can name all the routers, name all client devices, set up push alerts when designated devices join and leave the network, set up a routine router reboot schedule, and so much more. And most of all to me what I like is that you can access all of these settings while away from the home. For some reason, with the Orbi app, Netgear required you to be home and on the home wifi to access these settings. This was my first TP-Link product purchase, and I am extremely impressed. Highly recommended.

I had the non-Pro version of this and traded out of it to get the PRO version with the 2.5Gbe ports since I recently upgraded to 1GB+ internet at home. This works and works well, I easily get over 1GB throughput on my Mac Mini via the wireless connection using just the 5Ghz band. Pros are that it is dead simple to setup and use and works flawlessly out of the box. Cons are that it is NOT for tinkerers which I am one but I just wanted a simple device that did its job without getting in the way. You can't mess with the knobs and dials like some other wireless devices but what you do need is there typically. If you are considering this vs other devices here are the biggest reasons to get this: - mGig / 2.5Gbps ethernet ports - you'll need this to go beyond 1GB if your internet provider supports it. Most modern cable modems now have mGig ports that support 2.5Gbps speeds. You can, if you have the ability, tie these 2.5Gbps ports together to get a wired backhaul if it is necessary but it may not be. (see next point) - Tri-Band with 2.4Ghz/5Ghz AND 6Ghz channels. If you can, use the 6Ghz channel exclusively as your backhaul between the wireless devices especially if you only have two of them. This 6Ghz back channel will give you blazing fast speeds between the primary router device and the remote device. I'm not certain how well this works with more than two devices as you'll then be sharing the channel between three or more meshed units vs one but it'll still be more efficient than a dual band device. - ALL DEVICES THE SAME - I want to have all devices the same in case one goes bad or you need to swap them. There are other mesh devices out there but some have a ROUTER and then SATELLITE devices. This does NOT do this. Every device can stand alone as a router on its own or simply mesh itself together and be used for wireless only. It is a simple thing but you don't need to think about which is which nor worry should your ROUTER die and you have no internet connection. - Wired bridging between devices - Multiple ports allow you to plug in wired devices or another wired switch (which is what I do) and run several wired devices off one remote meshed connection that then backhauls via the bridge to the device active as the router. This works without even thinking about it. Plug it in and go. - It is FAST! - as I said - 1GB+ on Wifi 6e connection Mac mini - Nearly get that with my iPhone 15 Pro Max. At this point I've owned two different sets of these and the old non-Pro unit is at another family members home and working flawlessly. There are regular updates. TP-LINK as the brand could be the achilles heel. I'm aware of the talk about the Chinese brand and the lack of trust there along with some vulnerabilities with other products they make. You'll need to make your own decisions there. Final note - I have NO experience with their add-on products. How the premium services they sell work is unknown to me.

Works exactly as expected. My internet doesn’t exceed 1 gig so I didn’t worry about the difference in this and the newer models. Mesh works exactly as expected, and the coverage was significantly better than my previous single router option. Setup was straightforward with the app, firmware updated on its own, and everything just works. Very pleased.

Avoid this product. failed after a couple of months.

Fácil de usar, excelente distancia de cobertura wifi desde encender un solo aparato. Lo recomiendo ampliamente.

Excelente Deco , fácil de usar y sin problemas crea tu red y listo a disfrutar wiffi sin cortes o baja potencia wiffi .

The TP-Link Deco mesh system has easily become one of my favorite upgrades in my entire home. I’m genuinely blown away by how stable, fast, and reliable it is. After dealing with weak spots, slow speeds, and constant frustration from older Wi-Fi setups, the difference with the Deco system is night and day. Setup was unbelievably simple, and once everything connected, the whole mesh basically optimized itself. What really impressed me is how consistent the speeds are across all three floors of my home. The basement, main floor, and upstairs all get fast, smooth performance, and even high-demand devices like my Apple TV 4K, Xbox, and iPhones all run flawlessly. It feels like I finally have the network my home always needed. The design is clean and modern, the app is extremely user-friendly, and I love being able to see which device is connected to which node at any time. The system just feels intelligent. It automatically manages the wireless backhaul, balances the load, and keeps everything running without me having to babysit it. On top of that, the Deco units stay cool and quiet, and the entire mesh handles heavy use without any drops or slowdowns. I can stream, game, run smart-home devices, watch 4K content, and do everything at once with zero issues. Overall, the Deco mesh system has been one of the best purchases I’ve made. It completely transformed my home network experience. Fast speeds, seamless coverage, great design, and excellent reliability. I’m extremely happy with it and would absolutely recommend it to anyone who wants a rock-solid Wi-Fi setup.

التغطية شيء خرافي يعطيك مدى تغطية واسع جداً صراحه يستاهل كل ريال انحط فيه وانصح في بشده ويعتبر استثمار على المدى البعيد خصوصاً انه يدعم واي فايE6 بس لازم الجهاز يدعم الميزه كذلك Hz160 كذلك التغطية تصل الى