UniTak3D Ender 3 3D Printer LED Light 24V 7.5W Dual Sides Embedded Light Bar Strip Upgrades for Ender 3 V2,Ender 3 V2 Neo,Ender 3,Ender 3 Neo,Ender 3 Pro,Ender 3 S1,CR6SE,Voxlab Aquila(2020 Profile)

The media could not be loaded. These lights are brilliant. Anyone comfy with 3d printing should have the know how to install these. Installation is simple, and they provide excellent light for the entire bed, and below the bed! This is the best mod I've added by a mile.

I have been after some lighting for my Ender 3 v2 Neo for some time.Fitted this unit, but was wary of opening the power supply as this would throw my level and z offset out (taken me long enough to get it just right)So opted for a 24v 1a plug in converter which came with loads of adapters and a screw terminal option.24V 1A Power Supply Cord 24 Volts Charger £12.99 on AmazonAll working well and the z offset is still fine.I hope this is of help as I was looking at the reviews to see if anyone had tried an external power source.

As it comes this is OK, a bit awkward with the potential for the LED strip sides to get stuck in the inner Z axis wheels, and the power cable can interfere with the outer Z axis wheels if not fitted well. I have a few improvements which make this kit great:1) Cut 10mm wide strips of something opaque like a UK milk bottle, and slide this plastic down the inside of the Z axis at the same time as the LED strip. This keeps the LED strips well clear of the wheels and softens the light.2) Slide the switch into the 3d printed housing from the cable sides, do not attempt to push it in from the top as it is likely to snap the print.3) Cut the power cable mounting strip to the shortest length necessary, it's a pain to feed the cable through more than about 20cm. Mount the power cable on the back of the Z axis frame where the wheels don't run, don't try to feed the cable under the wheels.

Behold for that which illuminates the printNice bright, I took the top bar off and fed the lights down the channel, ran the cable across the under side of the top bar and fitted the supplied cable cover, you need to take the power supply off the side and put the wires in as per the photos.

This item is a very unique thing many would think you wouldn’t need however let me tell you - you do.Having a light on your printing space means you can spot errors easily before the print is finished, or you can record in time lapse the print and not worry about it being too dark.This light is compatible with any ender 3 or clones, like mines (labists et4). Light is well distributed. I had to mount my cabling behind the gantry due to minor differences between my printer and an ender 3, but this however was the only issue I had.The light was delivered very fast and was well packaged. I do wish they had included a bracket for the switch as I tried printing it and it kept breaking, however this was due to my filament which had become brittle.In short you won’t regret buying this light if you want to watch your prints being constructed.

Soldering need to be improved. Otherwise it's a great product...

Just what I needed. Easy to fit, once you watch the video properly. Such a difference, will make printing so much easier. No more phone torch or flashlight.

Not what i expected.Terrible quality, wires are exposed in psu, wheels are catching on rubber guide panel provided. Terrible quality and requires messing and costumising kit to fit it . Returning. This is not ready product and the videos are so confusing!!! They are showing installation for mutiple printer models. Using parts that are not default and differ from product you purchased 1* .