2 Pack for Google Pixel 7 Pro Screen Protector 6.7-inch + 2 Pack Lens Protector with Positioning Tool, Self-Healing TPU Film, Touch Sensitive, HD Ultra-Thin

By FARRRR the best screen productor I have purchased with GREAT instruction and installation kit so it is EVEN all around. Buy it you won't be disappointed.

Very nice kit for my Google Pixel 7 pro. I am amazed at how easy they made it to install. The kit comes with a jig that basically aligns the screen protector for you. All you have to do is peel and squeegee. This covers the curves edges perfectly! The screen protector was completely on there within a few minutes!!! The edges and corners did not peel like others I've tried. The screen protector actually covers the entire screen. The quality of the protector is excellent! It is crystal clear and I do not have any issues with the fingerprint reader. Also, it seems as though this screen protector tends to stay cleaner than the previous screen protector I had on this phone. It feels very smooth. This kit also came with the small camera lens protectors. These for sure you have to use your eyes and hands to properly align with the camera itself, but it wasn't that difficult. The kit came with two screen protectors, two camera lens protectors, two alcohol prep pads, too sticky lint cleaners, one lint free cloth, and the plastic jig that aligns the screen protector for you. I am overall very happy, and I highly recommend this product.

I managed to apply this protector perfectly first try. I previous had two $55 protectors that didn't work out. The expensive one wouldn't sit right and had massive amounts of bubbles I couldn't remove and the sides didn't sit well. I wasted $110 on nice expensive protectors. I bought these cause I've used the brand multiple times for iPads, Kindles, Switch, 3DS, PS Vita, Pixel 3a XL, Samsung S5 and S7. I never had one go on badly and always a perfect fit. They saved my devices multiple times over and I still have yet to bother replacing them they clean up and look new. Zero bubbles from this brand using my extra steps to ensure no dust as much as possible. I say I'm not a huge fan of TPU I'd rather have glass. I had one small fabric piece land just inside an edge. I picked at it and the TPU tore leaving a very small tear on an edge. I'm not to concerned about it since it was the only spot but I know the screen won't try to lift up due to the tiny air pocket. Best part if it does I have an extra so least I can do it a again and for less than a 5th the price of expensive protectors. I bought two packs just encase so I have 3 left. This has to be the best and easiest application method so far. I might have bent it too much but I got the lines out and they don't show up when it's on. You only see them when it's off and shining light at the perfect angle. Also I can just pull it off and try again later. If anyone has trouble with bubbles and dust I highly suggest this method: 1) Turn your shower on for a bit to humidify the bathroom. This will draw the dust down and less will float in the air. 2) Keep door closed and shower running while you do the assembly on a flat surface to keep it humid and mirrors fogged up. I just use an old mouse pad over my closed toliet seat. If you have counter space the better. I have not had an issue with dust or bubbles doing the above. Just work over a clean flat surface. I've placed towels over my sink and laid a book on top that to make a flat dry surface as well.

I have never before bought a screen protector for a phone that was as low quality and needlessly complicated as this one. I watched two separate installation videos from the company, the first one at the link on the product itself, and the second one after looking on their youtube channel for a video specifically for my phone. In both videos, the product I received and was trying to put on is COMPLETELY different than what they're showing! (the product applications they show in their videos *make sense*, it's straightforward and what I'd expect from the overwhelming majority of screen protectors in their application. What I got was the exact opposite) Start to finish, standard pack of alcohol wipes, microfiber, and dust remover stickers. The dust remover LEFT RESIDUE on the screen!! Leads to an endless cycle of: wipe it off, oops now there's more dust on it. I have NEVER had another screen protector's kit do that to the screen. The kit also came with.. I don't know what it's supposed to be, some white piece of plastic that you shove into the USB-C port, maybe some kind of guide? I have no idea how it's supposed to function as one, it's not shown in either video I watched. All the videos show a big piece of plastic the size of the phone being used as a guide, noticeably missing from this kit. I don't know what this dinky little white plastic thing is supposed to be. The screen protector itself has some green adhesive strip on it, one side of its cover peels off easily, the other not so much. After getting frustrated trying to figure out how this is intended to be applied to the phone and the covers peeled off, I decided to just take them all off and try my best to just get it on the phone. The cover on side the adhesive strip is on is SO HARD to peel off that I began tearing it in half before it even came off! After dealing with that, I'm finally greeted by the actual screen protector... it's a f***ing flimsy piece of plastic! Nope. I'm not even going to try the second one, this is nonsense. Find another screen protector, this ain't it.

Easiest screen protector installation I have ever had. Zero bubbles and perfect fit.

Absolutely, positively the BEST, most well thought-out screen/lens protector and install kit I have EVER bought! Just follow the instructions in the video(s), take your time, and it will be perfect.

Basic protection, but unhappy with screen responsiveness. I edit videos for social media on my phone as part of my job, and it was very irritating, often not responding as I intended. Finger print unlock has gotten less as less reliable as well, and it's only been about 2 months

They work as intended there is no issues installation pretty straightforward the kit is actually really good it comes with a little plastic tab that slides or slots into your USB C charge port and keeps everything aligned.

Ich habe bei meinen letzten zwei Telefonen (Sony und OnePlus) wegen der gebogenen Displays kein Panzerglas mehr verwendet. Ich hatte das zum ersten Mal beim Telefon davor (auch Sony) und das Glas passte natürlich nicht zu 100% drauf, aber das war vom Design her so vorgesehen. Fand ich trotzdem nicht ideal. Mit dem neuen Telefon kamen dann jetzt diese neuen Folien. Beim letzten Telefon - OnePlus - habe ich nie bereut, kein Glas verwendet zu haben, da das Display nie richtig in Gefahr war. Das Sony ist mir drei Stockwerke nach unten in den Keller auf Betonboden gefallen (über ein paar Abstecher des Eisengeländers, fragt nicht), da hätte auch das Panzerglas nicht geholfen (zum Beispiel war durch den Aufprall trotz Schutzhülle die Rückseite gebrochen). Wie auch immer, mit dem fast 1000€ teuren Pixel 7 pro wollte ich mal wieder auf der sicheren Seite sein. Ich habe beim Kauf der Folien das Installationsvideo angesehen. Wer je Panzerglas selbst appliziert hat, weiß, dass die Ausrichtung Glückssache sein kann. Oder das korrekte Auflegen der Klebeseite (jaaaaa, fragt nicht). Oder das Kameraloch... Egal, hier gibt es dieses Problem schlicht nicht. Man hat ein Tool zum Ausrichten, eins zum Glattstreichen und ein Reinigungskit, fertig. Man kann es faktisch nicht falsch machen. Großartig. Es gibt ein paar winzige Blasen am Rand, ich gehe davon aus, dass die verschwinden werden, wie beschrieben. Die Oberfläche der Folie ist gleichzeitig glatt und unrutschig im besten Sinne, schwer zu erklären. Die Kamerateile habe ich nicht benutzt. Ich hoffe, ich muss hier nie reinschreiben, ob die Folie ihrer Schutzfunktion ordentlich nachkommt, aber wenn das der Fall sein sollte, ergänze ich hier. Installation, Passform und Haptik ist bisher 1A, nichts zu meckern. Update: Schön mit Display auf die Fliesen geknallt, yeah. Nix passiert. Aber ich habe auch eine Schutzhülle und bitte macht das nicht nach zum Testen, aber bisher Daumen hoch!

I didn't have especially high hopes for this screen protector but having seen a video recently about how easy it is to scratch the Victus glass on the Pixel 7 Pro I thought I should take some precautionary steps to minimise the risk of scratching the screen. I was pleasantly surprised, as having watched the installation video very carefully, I was able to apply the screen protector without any difficulty and, unusually, without trapping any dust or other particles. With the screen protector in place it is barely noticeable and feels very smooth to the fingertip. The fingerprint scanner still works perfectly and although suggested in the instructions I did not need to invoke the screen protector setting. A further significant benefit is that it works perfectly with the case I use, a Quadlock Mag case without the case interfering with and lifting up the edges. The only slight concern I have is that the protector for the rear camera completely covers the lenses whereas it would have been better to have left holes. I am worried that the camera quality may degrade but I will keep an open mind for now. Some reviewers have mentioned that it looks ugly but with a case on it is absolutely fine aesthetically.

Ces films LK de protection sont toujours au top. Ça fait des années que je les utilise sur différents smartphone. Cette fois si c pour un pixel 7pro. Facile à poser en respectant les étapes (voir la vidéo de pose du fabricant). Aucun défaut, s'adapte parfaitement au modèle, et le film ne se décolle pas dans les coins avec une coque. Vraiment je recommande.

Le carátula de protección para un teléfono Pixel 7 profesional es perfecta, salvo que es un poco cara