🎶 Step Up Your Game with Yamaha's Sustain Pedal!
The Yamaha FC5A Sustain Pedal is a high-quality foot pedal designed for keyboardists, featuring a rubber bottom for stability, a USB 2.0 Type B interface for easy connectivity, and a lightweight design at just 340g. Perfect for musicians of all levels, this pedal enhances your sound with seamless sustain.
Product Dimensions | 17.9 x 11.2 x 4 cm; 340.19 g |
Item model number | Yamaha FC5 |
Colour | Black |
Hardware Interface | USB 2.0 Type B |
Signal Format | Analog |
Number of Strings | 6 |
Material Type | Rubber |
Country Produced In | china |
Size | Full Size |
Proficiency Level | Beginner |
Colour Screen | No |
Power Source | Corded Electric |
Voltage | 9 Volts |
Item Weight | 340 g |
G**E
Yamaha volume pedal.
This volume pedal is top quality very well made & will last a long time.Ideal if your a proffesional player.Good value for money.⁸Very well made & very good quality.
R**L
Great pedal ! Update - nearly 8yrs later !
UPDATE from my original posting below : I still stand by all I have said below, but after nearly 8yrs of service, the pedal has died on me. I think perhaps I have abused the pedal too much - mainly plugging the jack into the back of my organ keyboard, then lowering the pedal, from behind the keyboard, down to the ground, by holding the cable - so the full weight of the pedal is dangling on the cable.So, with said abuse, 8yrs service is pretty good. I have decided I will buy another Yamaha FC-7 - and resolve to take better care of it ! Read my comments below, from 8yrs ago - it has been a great, reliable pedal :2016 - My thoughts :Excellent volume/expression pedal.Up until recently, I had a Hammond SK2 dual-manual organ clone - and I used the corresponding Hammond EXP-50 expression pedal.While the EXP-50 pedal is built like a tank, it is perhaps too heavy. My main gripe with the EXP-50 is I play the organ, standing up, as I have my e.piano below it. The EXP-50 isn't great to use standing up. I sold the EXP-50 with my Hammond SK2.I bought a new Hammond "clone" - a Mag C2 organ. I needed a new volume/expression pedal - and my main thought was the Yamaha FC-7 pedal as everyone else raves about it. I now can see why. It does look a bit too generic for my taste though - not very stylish. It feels as solid as the EXP-50, and feels just as solid. I haven't noticed it sliding around on the floor either.However, I works great - and important for me, with a 3 min adjustment (unscrew ONE screw, pull out a metal clip, slide the whole mechanism and footplate itself, further back about 1cm, then replace the metal clip and screw) - it now works easily standing up - without any strain on the ankle or knee. Great result. And, it's much less expensive than the EXP-50.Also quite handy, the cable wraps up inside the pedal when being stored - although that is a bit fiddly to do.
J**Y
Very very good.
I bought my last Yamaha FC5 foot pedal from Amazon in 2015 and it was somehow lost earlier this year, and still worked properly after over 9 years. I've used other models and the last two only lasted for 3 weeks each. Yamaha products are good.
A**N
A good and well made pedal
I have a Yamaha keyboard which has a built-in sustain feature but it was never designed to be used for practical reason. Without a doubt I need to invest on an external sustain pedal that I have more and better control of. Thankfully my keyboard has an external jack. The Yamaha FC5 came on top of my selection list. Apart from the obvious brand, I thought on the safe side I should get a Yamaha make. The other brand may work but I did not take that chance.Build and appearance:It looks and feels sturdy. It is very compact and easily stored away in one of the side compartment of my portable keyboard carrying case.Performance:I was very impressed and well pleased. The sustain sensitivity level is just right, very close to what I was expecting, being a pianist myself. However, the non-slippery base does not hold the pedal well on floor surfaces such as vinyl and carpet. This means I have to keep using my foot to position it when playing. Not a big issue as I have since added a better quality non-slippery base.Conclusion:It is very unlikely that you will experience compatibility issue if you have a Yamaha keyboard and a safe one to go for. But there is no reason why this will not work on other make. I feel the price is at the top end hence I only give it 4 stars.
A**R
YAMAHA sustain pedal
This is a genuine Yamaha part bought for use by my son with his Yamaha keyboard. This is a very sturdy product that works perfectly every time.Looks and feels really solid, we always look after our equipment and are hoping for many years continued use from this item.Genuine Yamaha excellent product well worth the money, buy Yamaha buy once. Delivered quickly well packaged.
M**S
Pedal
Good item
J**J
Reassuringly well made!
I should mention that I haven't in fact used this yet, so my five stars are based on this pedal's physical properties rather than its performance. I chose this one over all the rest of its type because it was physically the largest I could find, which together with the rubber underside I'm hoping will keep it in one place when I use it. It's satisfyingly heavy and seems to have just the right amount of resistance when closing it, which it does smoothly and quietly and does the same when returning to the open position. It appears to be very substantial and well made as you'd expect from Yamaha and it should be borne in mind that these pedals have to stand up to a lot of use and abuse so they need to be tough. However, anyone buying one of these must be sure that the keyboard/instrument they will be using it with has the option to change the polarity in software as it doesn't have a switch. I suppose it would work out of the box with any Yamaha gear and probably most other manufacturers too, but it's worth bearing that in mind. Incidentally, years ago I had a similar sustain/damper pedal from some other keyboard manufacturer which had a quarter inch jack socket at the back instead of a lead so you could use whatever length of cable you wanted and your choice of straight or right angled jack plug at either end. I liked that idea because I prefer to keep my cables at an optimum length to avoid the inevitable snarl-ups, but I haven't seen it on any of the many pedals I've been looking at recently.
TrustPilot
2 周前
3天前