650Mbps Linux WiFi Adapter Supports Kali Linux, Ubuntu, Mint, Debian, Kubuntu, Lubuntu, MATE, Zorin, PureOS, Raspberry Pi 2+, Windows, etc, Dual Band USB WiFi Dongle Long Range Wi-Fi Antenna

Absolutely great product for Windows 11 and LINUX. The antenna is double normal size and penetrates signal through my three layers of bricks over a twenty foot area. Installation was easy and up and running on both system types after you have entered router passkey. You might have to restart the computer before WIFI is connected . I’ve tried cheaper standard dongles with LINUX and it’s a pain to set them up. Good value for money item, sturdy and comes with installation cd and instructions. but I didn’t need them.

Great WiFi Adapter, I was having issues with the on-board WIFI from the RPI4B and bought this and it made the world of difference. Installation was a breeze, plug in the adaptor and run a command line and job done. I never had compatibility issues with using this on bookworm and bulleye (2024-10-22) over all i found this good value and had great software compatibility.

If you're using Linux, then this is a very good option that works out of the box. I have had so much trouble with TP-Link adapters, but I plugged this in, and it worked straight away on multiple distros.

I've tried the adapter on a few machines now, it worked on Windows instantly with plug & play. I then tried it on Garuda Linux (Arch) and using the command they provide, the drivers were installed and working in under a minute. I also noticed very little difference in network speeds compared to my ethernet cable. However, the one complaint I do have is that the antenna feels a bit rattle-y and loose, and the biggest problem is the turning angles. Unfortunately, you cannot turn the antenna any way you like which is a bit of a problem depending on how your setup is structured. Finally, I tried this on a Raspberry PI 1B despite the description stating it is only for 2+, when installing drivers it seemed that the progress had stopped indefinitely, however, after communicating with Alkis from tech support, he was very helpful and explained why these lower models are not listed in the description and the reason it seemed stuck. It turned out that the compilation of the driver would take several hours on such low hardware, it ended up taking roughly 5 hours. After installing the drivers however, the WIFI adaptor works completely fine except that it can't be used to its full potential because it is being bottle necked by the RPI's hardware.

In the past, I've had problems getting a USB WiFi device working on Linux. This device came as a welcome change. Not wanting to be forced to buy a new machine to run Windows 11 I switched to Linux Mint. Due to past experience, I searched for a USB Adapter that offered Linux drivers, and this device seemed to fit the bill. I installed the Windows driver to try it out and then installed Linux. Before going through the procedure to download and install the drivers, I plugged the device into a USB socket. Linux found it immediately, and a wireless connection was available. It was easier to install on Linux than it was on Windows. I had a problem with the antenna, which I couldn't get to rotate. The reply from the support desk came the next day and encouraged me to use a little more force, and it worked fine.

Brand new condition,fully working with my device, easy to install.

I'm sure this device works fine but I had a problem, as follows. There is no R45 ethernet socket in the room where I wanted to use my PC so I hoped to connect to the internet via WiFi. But when the device arrived I noticed the instructions said I'd need to download a driver before I could use it. But I couldn't do this because I couldn't connect to the internet via an ethernet cable. In other words: "Catch 22". This is why I gave the median 3 stars, because I can't give an objective rating of how the dongle works as I never managed to use it. In the end I decided to return the device and find an alternative solution for my internet connectivity. Incidentally I found the returns process was excellent and my refund arrived very quickly. I'm left very impressed by this aspect of Amazon.

Having recently switched to Linux I have had lots of problems with Wi-Fi dongles. This one worked straight out of the box on Linux (Zorin 17.2 core). It connected to my phone's Wi-Fi hotspot on 5 gigahertz on channels 36 + 42 ( something none of the other dongles could do). I have an unlimited data plan for £18 a month and I'm getting 100 Mbs + download and 50Mbs+ upload speeds on 4G. So very happy, particularly at the speed and ease with which this product was installed and worked.

Branché sur Ubuntu, driver déjà présent car pas besoin de télécharger quoi que ce soit, opérationnel immédiatement, bonne réception :-)

La BrosTrend Linux Chiavetta WiFi USB AC650 è davvero un ottimo dispositivo di rete. La utilizzo su un PC dedicato a Linux e riesce a captare segnali anche piuttosto lontani, con velocità e potenza molto buone. L’installazione su Linux è semplice grazie al comando fornito dai produttori, mentre su Windows tutto avviene automaticamente, senza complicazioni. L'antenna della chiavetta forse è un pò troppo lunga, ma comoda da usare e costruita con materiali di buona qualità. In generale, offre prestazioni affidabili sia per Linux che per Windows, rendendola una scelta consigliata per chi cerca una soluzione versatile e funzionale.

I don't usually write product reviews but this BrosTrends wifi adaptor deserves one. I am assembling a new desktop computer to dual boot Win11 and Linux Debian. A new motherboard with a Wifi-7 chip on board. Works great for Win but no drivers available for Linux. Thus the need for a USB wifi adaptor. This is the fourth usb adaptor I purchased. The other three....no Linux drivers. So, I selected this AC5L adaptor because the description said it "works with Linux". If you are considering one of these because of the "works with Linux", go to BrosTrends website to verify that your particular Linux distribution is shown as compatible. Most are but there are some aren't yet compatible. As these drivers make it into more kernels, I believe more and more distributions will work with this adapter. So, I received this late Friday afternoon and began the installation and testing. Win11 setup was easy and it connected to my router. In Linux it was not immediately recognized. After doing all that I knew how to do, I decided to contact their Customer Service. This was about 10:00 pm Friday evening. I expected to get a response Monday or Tuesday. I got a response in about 10 minutes! I followed their instructions, we emailed back and forth a few times and by Saturday noon it was working just like I wanted. BrosTrend Customer Service is the best I have ever worked with. Now, for you guys who bought an 870e Crosshair Hero motherboard and are finding out the wifi-7 onboard will not work with Linux, this adapter is a nice workaround. By the way, my installation is working fine with Secure Boot and Fast Boot enabled. A big THANK YOU to the BrosTrend customer service team that helped me!

Después de probar otros 2 adaptadores con diferentes inconvenientes con mi Linux Ubuntu, este funcionó a la primer y sin necesidad de configurar nada ( solo la contraseña del wifi obviamente) Muy recomendado

I needed wpa3 on my old 2015 MBP running Linux Mint so I purchased this adaptor. Linux Mint recognised it, installed the drivers automatically and connected to the wpa3 wifi straight away. Amazing !!!!