Duco ABS Plastic Sheet 1/8" (3mm) Thick 12" x 12" - 1 Pack of USA-Made Textured & Matte ABS Black Sheet - Heat Moldable Plastic Panel for Home Decor, Crafts, Robotics, DIY Projects and Industrial

I recently had the pleasure of experiencing a remarkable piece of plastic that has truly exceeded my expectations in every way. This plastic marvel has demonstrated its versatility, durability, and environmental friendliness, making it a standout product in today's world. While it may seem like a simple piece of plastic, this piece of plastic has proven to be an invaluable addition to my daily life. Here's why I'm singing its praises: DUrability: One of the standout features of this piece of plastic is its durability. This piece of plastic has held up remarkably well in a variety of situations, from being exposed to extreme temperatures to enduring the wear and tear of everyday use. I've used this piece of plastic in outdoor settings, where it has withstood rain, sun, and even snow without showing any signs of wear or damage. This durability ensures that it will last for a long time, making it a cost-effective investment. Versatility: This piece of plastics versatility has been an absolute game-changer for me. I've found countless uses for it around my home and in various DIY projects. Whether I need to create a makeshift seal, protect surfaces from damage, or simply organize my belongings, this piece of plastic has proven to be a reliable solution. Its flexibility and adaptability have made it an essential tool in my household. Environmentally Friendly: The eco-conscious side of me also appreciates that this piece of plastic is recyclable, which aligns with my efforts to reduce waste and minimize my environmental footprint. Ease of Maintenance: Cleaning and maintaining this plastic marvel is a breeze. It requires minimal effort to keep it looking pristine, saving me valuable time and energy. In conclusion, this piece of plastic has truly won me over with its outstanding performance, durability, versatility, and commitment to environmental responsibility. It's a testament to the incredible advancements in plastic engineering, proving that plastics can be a force for good in today's world. I couldn't be happier with my purchase of this piece of plastic.

I have purchased this item twice now. I always want to have a piece on hand to make repairs to broken plastic household and vehicle related items. I use with a good epoxy product. The combination provides a bulletproof repair/reinforcement. For example, I repaired the lid to our pop up kitchen garbage bin when a corner broke off and the pop up lid would no longer work. I also repaired some wide refrigerator drawers that had split along the bottom. The easiest way to cut pieces to shape is to score it with a utility knife and bend along the scored line. Works perfect and results in nice clean, straight edges.

Heavy duty as I bought the 1/8 inch size, shiny on one side and grainy texture on the other. I intend to cut a piece to fit a "cut-out" of the splash shield to get at the oil drain plug and oil filter on Japanese vehicles rather than remove 20 plus clips that take forever to remove just to change the oil. Done it twice , which is why I bought this item. The black plastic of "Splash Shields" can be rather long and difficult to remove and difficult to replace, not only that "SOME" of the clips are slightly LONGER than the majority of clips. So that has to be noted and keep longer clips SEPARATE. The reason some are longer is that they also hold thicker splash shields toward the font of engines or near the front tires. It is obvious when you come clips and then separate the longer ones that go through TWO splash shields. I can see uses for the grainy side to cut -out (which is not an espionage term) which is for mounting a switch or two or three underneath the dash panel for interior lighting, power to a CB Radio, Power to an auxilary horn switch or to hold a momentary contact switch for an auxiliary Horn that would be much louder than the pip-sqeak horn from the factory. Any momentary contact will be held by the 1/8 inch ABS BLACK PLASTIC, which is the same type of ABS plastic that DWplastic plumbing pipe. So its unlikely to crack. Recommend 1/8 inch at it will of course be less flexible but should last forever in a car or truck. For a rough edge it will need to be sanded by wet-or-dry black sanding paper, only on the edge for a finished look. One could also add outlets for C- or Micro USB, or Lighting cables for charging phones or other devises. a good product that takes a little work. It can also be bent by use of a heat gun but assistance is needed to shape it into a right angle or less than a right angle or even an obtuse angle depending upon where you intend to attach it to your under dashboard area. 1/8 inch will be easily drilled and easily fastened to by whatever switch, guage , or outlet you choose to drill out the ABS to hold. A series of small diameter drilled holes can be made if you do not have a circle cutter, and as long as the item you are attaching has a cover it will not show up any jagged edge.

I ordered the wrong thickness and had to return. That being said, it’s good quality material. Nicely packed, all edges and corners good to go. Well recommended and I’ll definitely be ordering from this supplier in the near and distant future.

Nice product. Easy to cut and trim. I used to cover a cutout in an older boat baseboard. Worked great.

Love this stuff. Works like a hot dam. I wanted an iPod holder but Ram-Mounts no longer make them. Decided to make my own with this. After I had a design I made a bending block then cut it out and bent it up. The bending is amazingly easy. You heat it back and forth with a hot air gun until you feel it soft when given a slight push with your finger. Sort of a rubbery feel. Then you bend and hold. It cools and re-hardens fast.

Exactly what I needed. If using a jig saw to cut you must cut very slowly. Blade speed at a few strokes per second. Easily bent with a heat gun. Nice prod!

Was able to make a folding desk for my laptop and one for my phone. Great material. Very strong.

Material appears good. Handling is horrible. There's footprints on it. NOT impressed. Like come on!

Se ve de buena calidad. Todavía no la uso porque estaba esperando un par de accesorios pero esta planeada para hacer un amp rack para mi equipo de car audio en el coche. venia bien empaquetada en una caja de carton la cual venia bastante amplia y llego en perfecto estado.

I needed to fill in an a small area on my motorhome where I had removed an old solar controller. This is a good quality product that is smooth on one side and textured on the other. It was easy to cut to the size required and the finished job looks very professional. I would causation if you want to use the smooth side as it shows scratches easy but the textured side is nice and will not show any scratches.

Llegó en muy buen estado, el vendedor reforzó el empaque para que no se maltratara

I used these for a car audio system to adapt after market speakers of a different size to the OEM mounting locations. I traced outlines using a silver marker and cut them with a band saw and scroll saw. They cut very easy and did not break or crack. Probably a million uses for these.