Fanttik E1 Max Electric Screwdriver, Mini Precision Screwdriver Set, 50 Magnetic Bits, Magnetic Storage, 5/32‘’Hex, Repair Tool Kit for Electronics Phone Camera Laptop Watch (Grey)

I acquired this rechargeable screwdriver set for my husband, and he is thoroughly impressed with its performance. The magnetic bit holders have proven highly effective, as he has not misplaced a single bit in the year he has owned it. The device maintains its charge exceptionally well, allowing for numerous uses between recharges, and its portability makes it incredibly convenient. Despite its compact size, it delivers remarkable power. Given its exceptional quality and functionality, I believe this product offers outstanding value. I highly recommend this purchase.

I bought this after seeing a million posts about it on tikTok, even some familiar techtuber faces. I must admit, I understand the hype. While it may not come with as many bits as my iFixIt kit, it still comes with enough bits to cover everything I usually have to tear apart. It's heavier than expected with a metal outer casing with a nice feel and quality. The screwdriver in the center itself offers a decent amount torque in both the Low and High modes, though I really don't notice too much difference between them. I thought it would be uncomfortable to hold because the screwdriver is straight with no ergonomic curves, but so far it's been fine. I have used it to tear apart game consoles, computer desktops, laptops, and even kids toys to replace batteries. I also like the included tweezers and pry bar that add even more functionality to this already useful kit.

I have done a few quick tests to see if this is up to my expectations, and wow it it exceed them. Its powerful, compact, has extended bits, and has a very quality feel. I was worried that the bits would not be long enough, its been a problem I have run into even with expensive 100+ piece kits the thin extended bits that this comes with are going to be lifesavers no doubt. I did a quick test disassembling a GameCube controller, it had the tri tip bit I needed and unscrewed everything under its own power. I also tested some flatheads on light sockets, no problem. it put them back tighter than they were by hand lol. honestly this this is a STEAL for 50$ I had my eyes on a cheaper one for a while but I'm SO glad I went with this instead. I likely wouldn't have bought this at full price, but its a no brainer discounted. I only have a few small criticisms. because this thing is nearly perfect. my biggest issue is repairabilty, its why I got this in the first place. I work on LOTS electronics and gagets and 3d printers so being able to do something like replace the battery in the future would be a feature if it was truely perfect. I just remembered that it did my p1s hotend screws with a little effort, which was very nice, no more Allen keys! its possible that the aluminum tube chassis is removable, maybe it needs heat idk. its a problem for the future I guess. the only other thing I would change is really that I'd like more of these extended bits. They are just super nice and I'd like more sizes. oh if it had a bit of grip to it and maybe some texture on the buttons too, they can be a bit hard to find if you can't see. I did test some of my bits from another kit, some of them fit a bit too snug others for fine. none that wouldn't go in, but I had to wiggle them out. I included a video of trying to stop it by hand and it was pretty difficult. it really does have good torque. basically impossible to stop without a little more leverage (high torque setting in the video). I had held off on these for ages, as I had an "electric screwdriver" like 10-15 years ago that was so awful and thought they were all too weak and bulky to be useful. I expected this compact one to have so little torque it would be useless, the opposite is true it has plenty. it unironically has more torque than my brushed "electric screwdriver" I had ages ago, this was about 2.5in dia and 10in tall lol. the tech is there now, and the price is right. I've never jumped to give something a glowing review this fast before.

I’ve been using the Fanttik E1 Max for a couple of weeks on phones, laptops, and the odd controller repair. A few quick impressions if you’re thinking about it: What it actually does well Two simple modes: “Low” for delicate stuff, “High” for everything else. Even on High the torque tops out at about finger-tight, which is perfect for tiny brass standoffs and plastic shells. Bit selection that saves you internet scavenging: The 50-piece tray covers the usual Phillips and Torx plus the weird tri-wing and pentalobe bits you never have on hand until midnight strikes. Built-in light and magnet: The LED ring makes it easier to see tiny screws, and the magnetic bit holder stops them from swan-diving into the carpet. USB-C charging: Plug it in alongside your phone; no proprietary puck required. One charge lasted me through a laptop fan swap and two phone battery jobs. Where it comes up short Torque ceiling: Don’t expect it to muscle out a stuck fan screw or bite into wood. If a screw is factory-tight, break it loose by hand first and let the motor take over once it’s moving. Speed difference feels small: Low vs. High is noticeable, but you won’t get a dramatic RPM jump—just enough to keep from overtightening soft plastics. Tips from a serial fiddler Start on Low when you’re unsure; flip to High once you’ve gauged the thread. Keep a manual precision driver nearby. It’s faster to switch tools than to fight the motor when something’s stubborn. Use the magnetic tray lid as a parts corral. Saves hunting for screws later. Bottom line: If your projects live on a work mat and involve ribbon cables and tiny screws, this driver is a big quality-of-life upgrade. If you need brute force, grab a different tool—but for electronics, watches, and hobby builds, the E1 Max hits the sweet spot.

I’ve been wanting one of these for so long, but it was always out of stock whenever I tried to get it. Finally, I managed to grab one, and it’s a must-have for any PC builder. The quality is excellent, and it comes with all the bits you'll need. The screwdriver itself isn't too powerful, which is perfect for building a PC—too much torque can damage your components. I’ve only charged it once since I got it, and it’s still going strong. I use it weekly, and it’s been fantastic!

Très solide. Et très pratique. Bon pour le service.

パソコンをいじる時に重宝してます。 収納できて、電動で機能的、かつ、デザインもいいので、満足しています。

Ho acquistato il Fanttik E1 MAX e sono rimasto molto soddisfatto. La spedizione è stata puntuale e il prodotto è arrivato in perfette condizioni. La confezione è completa di tutto il necessario, pronta all’uso senza dover aggiungere nulla. Dopo averlo provato su diversi progetti, posso dire che è un attrezzo davvero valido: resistente, maneggevole e preciso. La qualità costruttiva si nota fin da subito e dà una sensazione di solidità. Per chi cerca un mini cacciavite elettrico affidabile e versatile, credo che sia un ottimo acquisto: soldi ben spesi

Muy buena calidad estuche de aluminio. Aunque parece más pequeño que en la foto. Pero funciona muy bien.