Can this 6" damper connect directly to the ac infinity cloudline t6 fan or it need to connect to duct first then fan?

No. This has a female sized connection. The fan's diameter is for attachment of ducting. It is the SAME SIZE as the damper. A short section of duct will be needed to connect the two. Could use a 3 inch piece of 6 inch rigid duct and tape it.

How air tight is this? Is it leaky at the center hinge or does it have gaskets there?

The individual butterflies do not have any sort of gaskets or seals around their mating surfaces as they're not meant to be a way of "sealing off" a section of air handling equipment in an "air-tight" sense of the phrase...BUT, I will say that.. up against comparable dampers available at any home improvement store or HVAC supply house, these are of a NOTICEABLY higher quality! This may sound like a sales pitch, but I assure you.. I'm nothing more than a customer who is VERY happy with their products. AC Infinity component are like holding an Apple product! Even their packaging just feels "premium"! The housing itself is very stout/heavy, made of thick (I believe) drawn metal, and not the typical thin, stamped/rolled and pinch-welded galvanized sheet metal that most others are made from. The damper body is strong enough that I could NOT very easily get it to flex/distort in my hands. Obviously don't try this, as it's imperative that it stay "round" in order for the butterfly flaps to operate smoothly, but that's exactly WHY I tested that, because I wanted to see how easy it would distort when manhandled.. so I knew how delicate I needed to be with the thing while installing it, laying on my back, in my hot/cramped attic.. and I was surprised and shocked at how rigid the body of the unit actually was! I've purchased/installed several AC Infinity 6" and 8" dampers now, and both of the HVAC pro's that I've had help me with my projects have all been shocked, and have commented about how amazed they are at just how nice ALL the AC Infinity stuff actually is once they finally take it out of the box and handle it. It does have 2 soft rubber "o-ring" style gaskets around the outer diameter, meant to create a seal with the mating sections of pipe or hose that you slip onto either end. The butterflies are very light to operate, they move very smoothly, and the retraction spring gives them a satisfying positive "clunk" when they return to their closed position after you turn your unit off and the air pressure drops inside the duct. The butterfly sections are center hinged, and they seat up against a drawn "lip" inside of the body of the damper, so that any back flow pressure will actually push them up against this lip, and the more back pressure, the harder it will push against them making it difficult for any sort of air mass to move backwards up the system.. but as I already mentioned, it's not a submarine portal, so by no means does it create an air/water tight "hermetic" seal, but if you're only concerned about things like air drafts during cold weather (what it's really designed for) then you won't find a nicer damper! Put it this way, it's not designed to be a "check-valve", or a shut-off valve, so I wouldn't try to use it to completely block-off a section of duct when not in use, or I wouldn't try to pressurize the back side of this thing with another fan, and expect it to prevent that fan's output from migrating backward/passed the damper. A lot of people think you can have multiple fans share a single, centralized, exhaust duct as long as you install a backdraft damper behind each fan, and that the damper will prevent the other fans from backfeeding each other.. but that's just not the case. It won't prevent things like gases, smoke, chemical vapor, or anything like that from entering a section of duct work when it's closed, but it will "seal" well enough to prevent cold back drafts, or the ingress of bird/insects, and it'll do a decent job at keeping your heat from escaping out your exhaust ducting when the fan is turned off and the damper is closed!

Will this work on the intake side of an ac infinity fan? i want to use this to pull air from a room and not allow the air to flow back into that room

It will work on both the intake and exhaust side of the fan. I use it as part of a room exhaust system in my setup, it blocks the backdraft of air but if will let some heat or cold radiate through the metal flaps.

Join PRO & Unlock Exclusive Perks!

下载应用程序

我们从

阿联酋
英国
印度
美国
日本

客户服务

关于我们

客户支持

Desert Online General Trading LLC

Dubai, United Arab Emirates

200mm Backdraft Damper, One-Way Airflow Ducting Insert with Spring-Loaded Folding Blades for 200mm Ducting in Range Hoods and Bathrooms Fans, 8-Inch

200mm Backdraft Damper, One-Way Airflow Ducting Insert with Spring-Loaded Folding Blades for 200mm Ducting in Range Hoods and Bathrooms Fans, 8-Inch

产品编号: 500078804

安全交易

细节

Brand
AC Infinity
Colour
Black
Electric fan design
Exhaust Fan
Power source
Electric
Style
Modern
Room type
Bathroom

🌀spring-loaded blades

🔒airtight rubber gasket seal

🛠️8-inch duct fit

描述

🌀 Keep your airflow flawless and your space draft-free with smart precision!

AIRTIGHT RUBBER GASKETS - Ensures zero backdraft and debris intrusion with a secure, airtight seal every time.
VERSATILE MOUNTING OPTIONS - Mount horizontally or vertically to suit any ducting layout without compromising performance.
SPRING LOADED ALUMINUM BLADES - Ultra-responsive airflow control that opens with minimal pressure, maximizing efficiency.
PRECISION FIT FOR 8 INCH DUCTS - Seamlessly integrates with standard HVAC systems for hassle-free installation.
DURABLE POWDER COATED STEEL BODY - Robust corrosion-resistant finish built to last in demanding home ventilation environments.

The AC Infinity 200mm Backdraft Damper is a high-performance one-way airflow insert designed for 8-inch ducts in range hoods, bathroom fans, and HVAC systems. Featuring a galvanized steel body with powder-coated finish, spring-loaded aluminum blades, and airtight rubber gaskets, it prevents backflow and debris intrusion while ensuring smooth, minimal-resistance airflow. Its versatile horizontal or vertical mounting and durable construction make it an essential upgrade for efficient, draft-free ventilation.

规格

Manufacturer	AC Infinity
Part Number	AC-BDD8-B
Package Dimensions	21.49 x 21.21 x 18.9 cm; 1.23 kg
Item model number	AC-BDD8-B
Size	8 Inch
Colour	Black
Style	Modern
Finish	Powder Coated
Power Source	Electric
Wattage	75 watts
Installation method	Duct Mount
Item Package Quantity	1
Sound level	59 Decibels
Blade length	7.08 Inches
Speed	1500 RPM
Switch style	Touch
Certification	UL
Special Features	Foldable
Batteries included?	No
Batteries Required?	No
Item Weight	1.23 kg

常见问题

产品是真实而真实的吗？+

是的，所有产品均直接来自美国，英国，阿联酋和印度的授权零售商。我们保持严格的质量控制过程，并在运输前验证每种产品。所有项目都有适用的制造商保证，并由我们的标准退货政策涵盖。

交货需要多长时间，这是可靠的？+

送货时间因目的地国家 /地区不等，通常从3-9个工作日不等。每个订单都可以通过我们的系统完全跟踪。我们处理所有关闭范围，并使用可靠的快递合作伙伴进行最后一英里的交付。您将通过电子邮件和我们的应用程序定期收到有关您的订单状态的更新。

什么是凡人车？从安全订购安全吗？+

自2014年以来，落伍车是一个国际电子商务平台。我们每天在全球范围内安全地处理数千个订单。每个产品都会在交付前经过我们的质量验证过程，我们提供端到端订单跟踪，24/7客户支持以及全面的回报政策，以确保安全的购物体验。

产品定价如何计算？+

我们的价格包括产品成本，国际运输，进口关税，关税和当地交货费用。我们处理所有海关和导入程序，确保交货时没有隐藏的费用。 Pro会员将获得额外的福利，包括免费送货。

TrustPilot

TrustScore 4.5 | 7,300多个评论

全球购物，通过 Desertcart 享受优惠

物有所值

各种产品的价格具有竞争力

全球购物

为 100 多个国家的数百万购物者提供服务

增强保护

深受全球购物者喜爱的值得信赖的支付方式

客户保证

深受全球购物者喜爱的值得信赖的支付方式。

沙漠车应用程序

随时随地随时随地购物。

NT$3116

关税和税费包括

Taiwan店铺

免费退货

30天对于 PRO 会员用户

15天无会员资格

安全交易

TrustPilot