Function Test 1: Test the shock mode 1.Press the "mode"button to select 2.Press "+""-"to adjust the shock level.We recommend you test it starting from level 1 is better. 3.Place the test bulb like blow on the receiver. 4.Press the "Y"button on the controller then you will see the test bulb will be light up.(The more bright the more stronger static shock) 2.Test the vibration mode 1.Press the "mode"button to select 2.Press "+""-"to adjust the shock level.We recommend you test it starting from level 1 is better. Hold or just place the receiver on the table. 3.Press the "Y"button on the controller then you will see the receiver is vibrating.(The higher level the stronger vibrating) 3. Test the beep mode and light mode Follow upon procedures to test the beep mode and light mode. Please note that the level of the light mode and beep mode CAN NOT be adjusted.And the level is setting 0 by default. Notes for use: 1:The life time of the batteries vary according as how often you use the product.Therefore you should often check the batteries by hearing the beep from the receiver collar and watching the indicator sign on the LED screen of the controller. 2.The valid distance of controller means the straight-line distance between the controller and the receiver collar without obstacles in between,if there are interference signal screening around,the actual remote controller distance may vary. 3.This product is for pet training.Only by training,the pet can understand the intention of its owner.Good effect can only be achieved after a period of training.Training sessions should be kept positive and short,about 10-15 minutes long each time. Packing include: 1 x Remote 1 x Receiver 1 x Power adapter 1 x USB Cable 1 x Usermanual 2 Set x Prongs
