Sponsored Ad – JETech Screen Protector for Surface Pro 11/10 (2024)/Pro 9 (2022) 13-Inch, 9H Tempered Glass Film, Support Surface Pen, HD Clear, 2-Pack

Looks good as described, touch sensitivity is perfect. Fits properly on my surface pro 9. Application wasn’t really easy although the instructions are very clear. It’s just me I didn’t do it properly the first time. Second time it got on perfectly but I had to throw away the one i used at the first attempt.

Package comes with everything you need - twice. So that’s great. Not like other brands that give you two protectors but only one set of cleaning utensils. I have been applying protectors for years and years and never have bubbles. Even with a screen that large the protector applied without issues. No bubbles or dust etc. looks great and feels great. For anyone struggling. Apply the protector in a steamy room like a bathroom where the shower just run. Reduces 99.9999% of dust. Even though I didn’t need it - the manual is good but the provided YouTube video even better. Nice animation etc. So yea. Highly recommended.

After a lot of product searching and checking reviews I decided on this JETech screen protector for several reasons. Probably like most people, I wanted a product that would protect my screen from scratches and damage, leave no annoying ‘bubbles’, allow my touch screen to work as it did before, and basically be unobtrusive. There are lots of options available, many based on laminated plastic films of various types. Clearly they can never offer the same scratch resistance as hardened glass and the JETech protector proclaims it is made of extra hardened ‘9H’ toughened shatter proof glass, and that it is a “one-push super easy installation, bubble free”. It comes in a well packaged box with a lens/screen cloth, a sticky film for removing dust and 2 applicator tabs. On the plus side are the clear instructions on the box. I did make sure I thoroughly cleaned the screen before I did anything. The supplied screen cloth is fine, but quite small, so I used a larger microfiber cloth first then used the supplied one as a final clean. Before I did anything I laid the supplied screen protector over my Surface Pro 3 and was surprised to find it was NOT a 100% match for fit. It is, however close. The protector is ever so slightly too small and the cut-outs for the speaker holes are slightly out. This is crucial as if you align and fit the protector up close along the top edge of the screen you will partially cover the front facing camera and other associated LEDs and sensors. Fortunately, I realized this before I stuck the screen protector down! The trick is to align the protector so that the camera and LEDs are aligned, which leaves a half mm border around the screen unprotected (a very very small gap). Other reviewers noted the piece of supplied sticky tape is small and that the instructions say this will ‘cover’ the screen. It won’t. I expect these are standard instructions for a range of other devices with smaller screens (phones, cameras etc). However, it doesn’t really matter. The idea is to dab on and peel back the tape, thereby lifting off any surface dust instead of wiping with a cloth and possibly adding more dust to the screen (or creating a static charge that attracts yet more dust to it). A suggestion – use an air blower/puffer commonly used with cameras – very cheap. Dust will, unavoidably, land on the screen continuously and it is easy to blow dust off right up to the point you fit the protector. Initially I stuck the supplied fitting ‘tabs’ as instructed but quickly realized they are all but useless and don’t stay on. The idea is to help avoid you touching the screen once the protective film is removed exposing the sticky side. Good idea. Doesn’t work in principle and you run the risk of the tabs peeling off and the screen dropping. Trick was to lightly touch the protector along the edge whilst aligning it. This is helped by it being glass not a plastic film as it has some rigidity and I managed to avoid touching the sticky side. It took me several attempts to align it properly (see above issue). But once there the screen slowly attached itself aided by gently smoothing outwards. The good news is that there are no bubbles and I was successful in not trapping any dust bar a tiny bit. The touch screen works just as it did before. It is unobtrusive, although I think there is a very slight loss of ‘sharpness’ over the original screen (the manufacturers claim a 95% light transmission). I gave it 4 out of 5 stars because the fit could be improved. That said, it is unlikely to start peeling off as there are no areas that overhang the original screen and it is hardly noticeable. Good: Hardened glass protector, unobtrusive, relatively easy to align and fit, no bubbles. And it hasn’t affected the touch screen sensitivity. Bad: Slight errors in cut and fit of the protector to the original screen making it more awkward to align, and I noticed a couple of very small manufacturing marks on the glass. Lifting tabs that are all but useless, and the sticky film for lifting dust off is quite small (minor issue).

Great protector, the instructions are clear and the extra cleaning set is really helpful

Perfect fit and easy to apply.

I have used this brand in the past with all of my devices and I am super pleased with all of them. Absolutely no faults. The instructions were great and it even came with a QR code which you could scan and get a video instruction on the installation which I found really helpful in order to prevent any dust being trapped under the screen and causing air bubbles. The whole kit was very well made and feels great on my Surface Pro, it's as if nothings even there but it gives me peace of mind with its extra protection. Would 100% recommend!!

It doesnt work with the slim pen 2, the jitter is horrible.

The instructions are clear, the materials provided to assist fitting the screen protector are satisfactory, and the screen itself is a good fit to the Surface Pro. Provided that you put in the necessary time in reading the instructions, follow them closely (in particular, make sure that you clean the screen properly at the right stage) and be patient, all will be well. An added bonus is that the protectors are good value and arrive well packed.

Awesome, firts perfect and the touch is uncompromised.

Ho recentemente acquistato la JETech Pellicola Protettiva per il mio Surface Pro 9/Pro 9 5G e devo dire che è un accessorio indispensabile per proteggere il mio prezioso acquisto. La pellicola è ben fatta e offre tutto ciò di cui si ha bisogno per applicarla correttamente. La qualità della pellicola è eccellente, offrendo una protezione affidabile per lo schermo del mio Surface. Mi preoccupavo di graffi o danni accidentali al display, ma grazie a questa pellicola protettiva, mi sento molto più tranquillo. Ha resistito bene a segni leggeri e ha contribuito a mantenere il mio schermo privo di graffi. L'applicazione della pellicola è stata facile grazie alle istruzioni dettagliate incluse nella confezione. Ho apprezzato particolarmente il kit di pulizia incluso, che ha aiutato a pulire lo schermo prima dell'applicazione, eliminando polvere e impronte digitali. Una volta posizionata correttamente, la pellicola si adatta perfettamente allo schermo senza interferire con la sensibilità del touch. Una caratteristica importante della JETech Pellicola Protettiva è la sua trasparenza. Non compromette la qualità dell'immagine o la luminosità dello schermo del mio Surface. Posso godermi i colori vivaci e la nitidezza del display senza distorsioni. In conclusione, la JETech Pellicola Protettiva è un accessorio indispensabile per proteggere il tuo prezioso Surface Pro 9/Pro 9 5G. La sua qualità, facilità di applicazione e trasparenza la rendono una scelta eccellente per mantenere lo schermo del tuo Surface al sicuro da graffi e danni. Consiglio vivamente questa pellicola protettiva a tutti coloro che desiderano preservare l'integrità del loro investimento!

Gud Product

الحمايه ممتازه وسهله جدا في تركيبها بعد مشاهدة فيديو لطريقة التركيب على اليوتيوب اول مره في حياتي اركب حماية لجهاز والحمدلله ظبط معايا من اول مره بدون اي فقاعات هواء تحت الحمايه والقلم والتاتش شغال ممتاز مع الحمايه لاتؤثر على اللمس اطلاقا

Very good