ISSYAUTO Third Brake Light Compatible with 2009-2014 Ford F150 3rd Brake Light Smoked Rear Cab LED Brake Light

I bought the 'smoked' color - which is really a black-out type of color - but I'm certainly not complaining. It looks great, with very bright red and white LEDs (red for brake, white for reverse or when turning on the rear overhead light for illuminating the bed). The only CON I found was the crappy quality of the supplied screws. I didn't exactly torque it down really tight, but it snapped the chineseium screw in half quite easily. It was easy to extract with pliers and turning, but I'd advise anyone installing this unit to simply use the factory screws that came out of the old brake light assembly. Aside from that little adventure, this thing is sleek, does its job, and has the nice little gasket to prevent leaks. I'd recommend. I figured 5/5 stars was sufficient even though the supplied screws were crap. It's a small inconvenience and I almost used the OEM screws initially anyhow. So now you know! ;)

This product was very nice would definitely buy again ..as others stated gasket to seal light is very cheap almost fell off replaced with weatherstrip and no leaks whatsoever..these are very bright leds they match my recon taillights perfectly..and looks nicer than recons 3rd brake light..you do not have to tap ,splice ,or solder they are simple to plug in took 30 seconds ...screws that come with unit are not for mounting purposes..they are provided to keep the unit together discard and reuse oem screws..do not over torque just snug them up.. mine did not crack I snugged up with light duty screw gun I recommend useing Phillips screwdriver... but my oem screw head stripped so I used a 6 mm. Socket to snug up .would recommend for the price it can’t be beat you won’t be disappointed .. Update : 1 month later and about 20" of rain later no leaks or yellowing.. lights are nice and bright ...the foam weather strip i used to replace is super soft and comformative it compressed to cabs mount perfectly and compresses super thin thinnner than oem gaket or gasket that fell off. When product arrived..would recommend .

Product was easy to install. And I also liked the fact that the gasket it came with was thick and not cheesy. I’ve read other reviews prior to purchasing these that some people complained after buying different brands that their 3rd brake light didn’t come with a gasket seal. Which you can buy separate I’ve seen on Amazon for like $16.00 (w/o tax). But this particular kit / brand comes with the gasket which was great. It’s so much brighter than the stock light, looks good. I only gave it 4 stars because the cargo lights don’t activate in reverse. Which I’ve read some people claimed theirs didn’t either. Which I don’t know why. But I have separate LED reverse lights which brighten up everything behind me in the dark. Other than that I think this product is definitely worth it. I will add they may not fit in your vehicles light connectors. As I had to shave mine down a little to fit. But the LED connectors are plastic so it wasn’t a major problem.

The product was as described. There are no instructions as others have said. If your buying parts for your vehicle you should have a slight clue how to use tools and have basic mechanical ability. That being said the install should only take a few minutes. Remove the screws that are in it and use the screws from the light on the truck. Hold the new LED light next to the OEM light after you have removed the screws. Look at how the bulbs are arranged right to left. Twist and remove the bulbs from the old fixture. Take the 3 bulbs out and put them in your pocket. Hold the new fixture in place. Check that the wire ends on the new fixture plugs are routed up over the end straight. Plug them in where you just took the bulbs out of. Line up the notches and twist lock back in place the same way you took them out. I replaced it because I saw water running behind the OEM light and I like LED lighting. A bit pricey for what it is, but easy install quick shipping overall good shopping experience. Looks good on the truck and should keep water out of the cab. I didn't silicone the new gasket or put any adhesive on it. It is plenty thick so tightened it down well. Don;t over tighten or you will break the plastic. Go even amounts side to side. I would buy again (shouldn't have to if it lasts ) for my 2013 F150 5.0L super crew XLT.

Very easy to install, looks great, small defects inside housing on light (ordered 2 of them and they both had small different issues), there was some noticeable condensation from time to time but it clears up easily. Pros: 1. Bright and Awesome Design 2. Plug / Play 2008 F150 - Cons: 1. You will need to silicone around the gasket, brake light housing and for good measure at the installation area on the truck (if not you will get a leak from rain or car washes). 2. Be Very Careful to not over-tighten the mounting bolts because it will break the light housing easily (press down gently on the housing and watch the depth of the screw head to the housing mating surface and snug it up to where there is minimal movement. Anyways, I’m overall satisfied.

This replaced the leaking third brake light on my truck. Mine is a 2010 f150 super crew cab. The installation of this light was incredibly simple. There are two prongs with bent wires. They dont look like the will work until you actually undo your third brake light. I reused the screws from my OEM in place of the bolts they provided. As well I used a clear RTV silicon to fully seal it up and endure no water will ever enter my cab again. Now, this looks absolutely amazing on my truck. Truly it does! However, it is not flush with the truck, like the OEM was. It sticks out about half an inch but is only noticeable from the side if you really look. As well, because of the darkness of it, its provides almost no light. Overall I am extremely pleased with this purchase. It took less than 10 minutes to install!

I was expecting more bright from this light but the fact is oem is brighter

You should probably replace your brake light seal by now if you haven’t. There will be nothing left. The seal costs $15, and this light is not much more and comes with its own seal. Very bright, easy install, get one now.

Perfectly replaced the stock one and performed really good.

Excellent! Love it. Very bright, looks great and fits perfect. Advise for anyone installing. Use the stock hardware (mounting screws) and remove the nuts on the back of the light. This will help it to fit very flush and tight to the truck. Easy fix for removing any space and making a great fit.

Good looking light, easy to install and the foam gasket looks good to produce a good seal.