6 Port 2.5G Unmanaged Ethernet Switch, 4 x 2.5G Base-T Ports, 2 x 10G SFP, Compatible with 100/1000/2500Mbps, VLAN, Fanless, Desktop/Wall Mount YuanLey 2.5Gbe Network Switch for Wireless AP, NAS, PC

It just works. no problems after more than a year. great speed.

I bought this to terminate the upstairs end of an optical fiber (Using a cheap 10GBase-SR SFP+) between the upstairs and downstairs of my AZ home. I wanted optical fiber because my connection is up/down and in AZ the induced surge in copper Ethernet from nearby (~ 1 mile) lightning strikes has twice blown out simple Ethernet switches. I knew with only a 1Gbps internet connection into my home it would be over-kill for bandwidth but I wanted to be ready for full-duplex fiber arriving one day. I had not appreciated the improvement in subjective LAN behavior brought by the lower latencies introduced by the fast buffer movements in my switches though. I do move large video files and Linux distribution ISOs around my network and now regularly see 600MBps (disk limited) transfers, and 150MBps for thousands of small files too. Very happy. This switch is quiet (fanless), runs cool, is so far reliable, and fast. The fabric is able to keep up with multiple 10GbE flows so it checks all of my needs, even the ones I had not realized before purchase. It does accept off-brand (cheap) SFP+. Recommended.

Stellar price to performance. I bought this to expand my home's 10G backbone and add a set of 2.5G ports for a test bench area where I set up and configure hardware. So far this thing has been a champ. It runs cool, I've even connected an RJ45 transceiver to it for uplink to my 10G LAN and while the transceiver is hot, the rest of the switch isn't. I'm not really pushing tons of packets through it or stressing it in any way otherwise, but speed tests (locally and to the Internet) show no difference when a machine is connected to this vs upstream somewhere. For the price, you can't really beat it.

It works. It's good. The fan is quiet. My network currently only has 5G Ethernet ports on the end machines but it has performed great with no issues transferring several hundred GB at a rate over 500MB/sec.

I bought this to bridge 10 gigabit fiber to 2.5 gigabit copper and hopefully a 10 gigabit copper port too. I bought a copper adapter for one of the SFP+ ports. I liked the fanless operation and small size. It delivers on these fully. It works flawlessly that I can tell. It does not produce a lot of heat. It works with the 10 gigabit copper SFP+ module and the off brand 10 gigabit fiber SFP+ module I have. I wish the supplied power adapter was a "sideways" model so that it didn't block as many ports on a power strip. That's my only real criticism. I also wish there was a way to dim or turn off some of the flashy lights. But I knew that would be an issue going in. It'll take some time to know if it is reliable long term but it seems great in the days I've had it. No regrets at all.

I wanted a 6port 2.5G port switch and received exactly that, performance has been top notch. There's nothing to complain about at this price point I got exactly everything as advertised.

Review for is for the [sic] "6 Port 2.5G Umanaged Ethernet Switch, 4 x 2.5G Base-T Ports, 2 x 10G SFP" variant. I purchased this to replace a SFP+ media converter while providing a few extra 2.5G ports. While it worked fine initially, including speed tests showing full ISP bandwidth (2Gbit) over both 2.5G and 10G ports, after about 4 days it stopped passing most traffic, only allowing DNS and ICMP (just enough to ping successfully), but no other web traffic. Restarts and trying other transceivers (3Com, Ipolex, 10Gtek, and a few others) did not help. All my transceivers work fine in my other equipment (two Mikrotik switches and the 10Gtek media converter), as does my ISP gateway and other switches. When I put my 10Gtek media convertor back in place everything functions again without even rebooting a single machine. One of the 2.5G ports was connected to one of my Ubuntu machines that runs nightly Github actions that shows it failed in the middle of the night. No network configuration changes could have been made at that time to cause problems. The problem affected all ports and all of my computers, both Windows and Linux. Given it initially worked but failed after a few days I'm concerned the manufacturing quality is poor and would not feel confident a replacement would be reliable over time. This is a very odd failure mode for an unmanaged switch. There's nothing to configure and no other network configuration changes occurred when it failed since it happened in the middle of the night. This was used in a climate controlled environment (my home) at all times with all other networking components in provably working condition.

I have the YuanLey 5 port 10G. Just needed more ports and this works well. No problems setting up and just works.

El conmutador (Switch) Ethernet Gigabit de 5 puertos YuanLey (YS-0500G) viene en una bolsa antiestática, acompañado de un adaptador de 5V-2A (110-240V 50/60Hz), un cable de alimentación de 80cm USB-A a conector DC Ø 5,5mm, y un manual de usuario que incluye español, protegidos en su caja informativa de cartón por una capa de espuma de polietileno. La carcasa metálica tiene un peso de 130g (180g con adaptador y cable) y mide unos 108 x 52 x 27,5mm (L x A x H). 1) En la parte frontal de la carcasa se encuentran las 5 + 1 luces indicadoras LED (del 1 al 5 en verde para los puertos + Power en rojo). 2) En la parte de atrás encontramos los 5 puertos RJ45 y el puerto de entrada DC 5V para el conector de Ø 5,5mm. 3) En los lados hay rejilla-orificios de enfriamiento. 4) En la parte inferior hay una etiqueta informativa y 2 orificios para montaje en pared. Es un switch de red simple, no gestionado, sin ventilador y de tipo Plug and Play, sin ser necesario la instalación de un controlador (driver), con detección automática de 10/100/1000 Mbps que admite Auto MDI/MDIX (detecta automáticamente el tipo de conexión de cable, directo o cruzado, y configura la conexión). Los 5 puertos se pueden utilizar tanto para entrada (desde el enrutador) como para salida a otros 4 dispositivos. Una vez conectado a la corriente se hace un breve "control de comprobación" y todos los 6 LEDS se encienden, quedando encendido solo el rojo de POWER. Una vez que un cable Ethernet está conectado y recibe datos, el LED correspondiente al puerto se vuelve verde y parpadea ante el flujo de datos. Para ver si hay alguna diferencia en la velocidad, en las pruebas con conexión a la PC utilicé cables Ethernet Cat8, una vez directamente desde el enrutador y la segunda a través del Switch. Como se puede ver en las imágenes y el vídeo adjuntos, tanto la velocidad de descarga como la de subida en ambos casos son muy buenas y similares (más de 900Mbps, resultados obtenidos con el Speed Test). Nota: Incluso si cada puerto del conmutador puede ofrecer 1000 Mbps, cuántos más dispositivos estén conectados en tu hogar a tu enrutador (mediante cables y WiFi) habrá menos velocidad disponible para cada uno de ellos (si se solicitan todos al mismo tiempo). Como los 4 puertos del enrutador están ocupados, para mí, este switch de red es lo que necesito para aumentar el número de dispositivos y les recomiendo que lo tengan en cuenta.

Ho preso questo switch per ampliare le capacità di rete avendo una rete di casa tutta cablata, dubbioso per la brand, ma viste altre recensioni positive mi sono convinto, confermo che è un ottimo apparecchio, fa egregiamente il suo lavoro, di ottima fattura solida. Ho fatto dei test con tool iperf con ottimi risultati, tra due pc, entrambi, con scheda di rete 2.5 dedicata su tratta di circa 20 mt con risultati costanti sui 2.33 Gb\s (cavi Cat 7). Consigliato rispetta le promesse.

Bell Aliant Users - Finally a Device that Syncs at the 2.5G your GPRON requires. It was either this Device or a Ubiquiti Switch for $700 - With Amazon's amazing return program, I decided to give it a shot. Received it in two days, Plugged the SFP into the SFP Port, and the Cat6 into the RJ45 jacks from my UDM SE to this Device, told the UDM to VLAN tag 35 on the 2.5G WAN port and It Immediately connected, and started Syncing at 2.5 GB - Amazing! - I Spent years looking for a Device that could do this for under $500, and I Finally found it. No more 800 Mbps speed tests, now im getting 1.2GB From my UDM SE on Download, and 940 Mbps on Upload. Additionally, this Device does not get Hot unlike some of the other Media Converters on the Market. After a Solid Week of Internet Traffic, with no downtime - It's still cool to the Touch! - Now let's hope this Switch lasts for years to come! Very Satisfied, and you will be too! - I will be Recommending this device to all my networking friends/people who want to free themself from the HH3000 with Bell

Switch is prijs kwaliteit gezien wel heel goed. Ben er blij mee heb alleen nog niet de 10gb uit kunnen proberen. Heb het op mijn nas aangesloten en top.

Working for 2 weeks now.... Noisy fan. 10Gb light doesn't light on. It works at 10gb (I've tested) with cat7, 8 but no light indicator.