YOOPAIPEI Sheet 310 x 320 mm, Double-Sided Textured PEI Magnetic Spring Steel Print Bed for Creality CR10/CR10S/10S Pro/V2/V3, Ender 3 Max, AnyCubic Mega X

I bought this for my Ender 3 Max as the glass bed just didn't want to adhere no matter how clean it was. I had an Ender 6 for a while that had a similar bed and had no adhesion problems at all using a similar cleaning regime so I can only think that the lack of an enclosure causes the issues.I have a Ender 3 pro with a similar build plate and it's a great upgrade over the standard build pad so thought I would put the same on the Max. Yes a glass plate gives a smoother finish but I quite like the texture this gives the surface and more importantly it sticks well.Fitting was simple, I removed the clips that held the glass plate on, cleaned the heat bed and put the adhesive magnetic sheet on. The glue allows you to reposition the magnetic sheet a couple of times until you have it spot on but does not come off once it is in use.Prints stick like the proverbial to a blanket and come off easily once the plate is cool, its nice and level too according to the bed visualiser in Octoprint.I will report back on longevity later but if its anything like the other one there should be no problems.

This PEI plate is incredible. The adhesion is perfect, as long as your bed is level. There is no need to add glue or anything to the bed and it heats well through the glass plate which is already adhered to the heating bed.Since adding this bed I have not had a single failed print. This plate is excellent and amazing value for money.

Originally got a product and it was great for first couple of prints then all of a sudden the prints just didn’t stick. I tried cleaning it changing z offset but filament just won’t stick to the built plates anymore so went back to the one that came with printer. Following my feedback the seller reached out to me explaining what happened and sent a free replacement . Outstanding customer service and after sales service, new one works great deffo best plate I have used so far. Thank you

Works a treat, far better than the glass it come with.Slightly textured helps with bed adhesion. Now I just need a decent fan case.

Really good. Far better than my flexible magnetic plate. Easy to detach and sticks well. Still looks brand new after lots of prints.I use it with 3DLac as well and so far things have popped off with no issues.

Fantastic item, extremely affordable and works way better than expected. I have an Ender 3 V3 SE and it fits perfectly, snaps straight on, levelled out perfectly. First print slid off like it was greased! Don't delay, get one! No more scraping off filament, no more bubbling, can't praise it enough! Thrilled!

good PEI flexible sheet, fits well, has a smooth and a slighty rough side, i use a glue stick for the smooth side and i have very good results, the rough side isnt to bad and creates a nice alternative finish, very good product and a reasonable price

The Ender 3 Neo V2 comes with a truly hideous and coarse sandpaper style build plate that is just awful. I have no idea why they did that and made it so rough that it destroys the base of anything built on it. Then of course there is the nightmare of getting things off the plate once finished and cleaning the residue and bits left stuck into the surface. As I said, hideous thing.In the knowledge that somebody somewhere must have made an alternative I hit Amazon the day after getting the printer. Found these and ordered them. A very short while later they arrived and I replaced the default and awful default build sheet. Perfection. Smooth side, rough side so you have the option of how you want the underside of your model. They stick well, they warp easily to assist removal of the printed item and they clean easily. Why didn't they use something like this in the first place?Ah well, no matter. Everything is good now. These are a perfect replacement for the horrid thing they call a build plate on the Ender 3 NeoV2. And the best thing? You get a choice as to which side you want to use. Just remember, the smooth side is more likely to release the model while it is being printed, so make sure you have some extra-hold hairspray to make the surface a bit sticky. Hairspray being much easier to clean off than glue. Just don't spray the rough side, you don't need to.Money well spent on a well made and quality product to replace a piece of c**p that the original company used.

Did what it’s supposed to

Nie wiem kto wystawia pozytywne recenzje tej podkładce, ale zapewne ktoś kto nie miał do czynienia wcześniej z drukiem 3D. PET-G nie przykleja się do stołu, na oryginalnej podkładce coś takiego nie występuje. Z wydrukami PET-G na oryginalnej podkładce trzeba uważać, bo przyklejają się tak mocno, że można uszkodzić powierzchnię podkladki. W przypadku tej z oferty nie ma obaw, wydruki same odchodzą w trakcie drukowania. Testowane na temperaturach 60-80 stopni Celsjusza.

Me semble convenir pour l'impression 3D. Je ne l'ai toutefois pas encore employé. Prix ok.

This plate is just as good as the Creality version for a fraction of the cost. If you are hesitant about buying a "no name" product, don't sweat it. Worth every penny. Will buy again.

After my last wire got cut, I needed a replacement. The quality on this is really good. Hard to move the wires a bit but it makes it feel like it’s sturdy instead of flimsy like the stock sprite extruder hotend