AUXITO 1156 LED Bulb for Reverse Lights, Super Bright White 1141 1073 7506 LED Bulbs with Projector Replacement for Reverse Lights Tail Brake Signal Back Up Parking Marker Lights, 6000K Xenon White

Installed this in my Sprinter van and it was substantially brighter than OEM halogen. Great price as it comes with two bulbs. Hope it lasts.

I purchased these to replace the halogen bulbs in my zero-turn lawnmower's headlights. They are brighter than the halogen bulbs, and provide a much more even distribution of light. I've now run these for somewhere between 50 and 100 hours in various conditions (very hot, cold (near freezing), rain, dry weather, etc.) and have had no issues whatsoever. The lights don't seem to get any hotter than with the halogen (and perhaps are a bit cooler), and the vibration from the mower has had no effect. They have remained well seated in the bulb sockets even when the lamp assembly has popped out. Also my mower doesn't have much power available for accessories, so the lower current draw was helpful. I would highly recommend these bulbs for this application. Update as of 5 Jul 2019 Well one of the two bulbs burned out about 20 service hours since I wrote the original review. I ordered a replacement set and now have a spare. Will see how long the still-working original and the new replacement last.

These bulbs have really changed my car’s look. They are extremely bright and I have no complaints. For whomever this may assist: I did have to add resistors as I drive a 2007 Audi A4 and they do throw a “reverse light left/right out” error, but I knew that was a possibility going in to this upgrade. So first I tested the bulbs themselves in the sockets alone and they worked, but flickered and threw the error. Knowing that this might be the case I purchased two 50W 6ohm resistors (one for each side) to splice into the reverse light wiring (bridge the blue wire with the red stripe to the brown wire using the resistor). All said and done, there is maybe a one second pause between putting my car in reverse and light activation (due to the resistors), but A) that is really no problem and B) there are absolutely no problems with the lights at all and they work exceptionally.

I put these in the headlights of my John Deere X324 lawn tractor/mower. Perceptually, these are least twice as bright (maybe even 2 stops, photographically speaking) than the original 1156 incandescent bulbs. The originals were not old, either, they were barely used. As the days get shorter now I have to mow in the twilight and on into dark and it is really easy now to see where your last pass was. That was not the case with the 1156. Too many bugs, though. ;) I'm sure these would also fit X300, X304 and X320.

They listed this bulbs as CANbus friendly, ERROR free bla bla bla! It isn’t! The bulb looks well made, has a good color but it doesn’t work (without third part load resistor) for error free as they listed it was. That’s my second pair of Auxito bulbs, first ones works and no codes/errors etc. I installed em at my reverse) than I decide to give em another move, got those bulbs for my DRL bulbs, which they listed as a good one for that purpose. Guess what, errors popping out from my dash. So if you’re Vag/Audi, European car owner and you’re looking for upgrade your bulbs to led, those won’t work without load resistor. Pros Very good bulbs, bright and strong (well made) Good seller (they were here all the time trying to help me (they really did) Cons Not a CANbus error free, needs a resistor

Any Wrangler owner will tell you, the worse part about their rig is the headlights and the reverse lights are horrible. How the national safety board let those things stay legal all those years is beyond me... I purchased these because my left reverse light burned out after 13+ years of honorable service ... RIP lil 1157 Five stars. Much brighter, easy to install. Fits female socket perfect and while it’s a bit longer than OEM filament bulb 1157, the stock Wrangler brake assembly has more than enough clearance. I like how this brand added a convex lens to the end to really magnify the LEDs on the end. Other brands just have LEDs. It’s Jan 15, 2020, Jeep has 100,099 miles (I know and she’s just breaking in). I’ll report back if they give out. But so far, very happy!

As of right now, 1 bulb works 1 doesn’t, have sent their service an email describing the problem. Will update when and if i get resolution to the issue. The bulb that does work is great, super bright, love the bright white light. Can’t wait to have both functioning. If your behind me when i stick it in reverse you’ll no it. The way it is now the police will stop me because they will think I have one light out, any excuse. UPDATE: After making contact with their customer service they quickly responded and are sending a replacements. I wish all companies were this responsive. Thats the main reason I changed to 5 ⭐️ SECOND UPDATE: Just received my replacement bulb. This company is awesome, they are true to their word and stand behind their product😊

I these as headlights in my Kubota Tractors. I first trird one set, but they were so bright that I ordered 2 additional set for my other tractors. I very good design and high quality, I would say they are at least 4 times brighter than the factory lights, no more being in the dark for me !!!

Installed these bulbs in a 2012 jetta tdi for the daytime driving lights there a really white bright led light changes the look and are bright so much better than the factory1156 bulbs ..

Recently ordered two 2-packs of these bulbs to replace my reverse lights and DRLs on my 2011 Jetta TDI. Upon arrival one of the bulbs was broken and did not work. Contacted customer service via email and within hours they responded and we sorted out the situation with new replacements on the way. Hands down some of the best customer service I've experienced, and the three lights that did work look great.

Update: After 16 months the LED's have failed. My vehicle is used about twice a week so not much actual usage on the bulbs. I do not recommend these. **** Installed these 1156 LEDs for the reverse lights on a 2021 Kia Sorento. Installation was simple. These aren't dual bulbs so you don't have to worry which way they go in the socket. As you can see from the pictures the difference is night and day. When I installed the first bulb and tested it, I did notice some faint flicker that lasted about 3 seconds then went away. I gave these bulbs 4/5 because I don't know about the durability of these. I will have to drive through a few puddles and let time pass. I will provide an update if the flickering happens again and if the bulbs have any other issue. For now I am satisfied with this product.

Installed these lights in my 2013 smart fortwo coupe brabus. There almost as bright as my headlights. Love them. Had them now for a couple of months. No issues at all. I do recommend this product.

Super bright lights but of the multiple AUXITO 1200 lumen 48-SMD LED sets I've bought (4), and the 1 102-SMD set, it is rare that both will last much longer than a year which is unfortunate. While spending $20-30/year on lights isn't a bad price, the traditional lights often last five or more. In my current set one of the bulbs just burnt out 2 weeks short of a year. Single circuit SMDs are the main problem. If the lights existed as a multi-circuit unit, a single SMD LED failure wouldn't kill the entire light, just make it a little dimmer.