Linksys Velop Pro WiFi 6E Tri-Band Mesh System MX6201-KE - Cognitive Mesh Router with 6 Ghz Band Access & 5.4 Gbps True Gigabit Speed - Whole-Home Coverage up to 3,000 sq. ft. & 200 Devices - 1 Pack

Was easy to connect to my other nodes

Worst buy ever. Speed is very slow and unstable, while my precious model did 800mb/s easily, this one struggles to get 100mb/s on the same network.

مفيد

I have Asus router Rt-Ax88u which wifi 6 but due to DFS channel i never get good speed. Connected ethernet 6 cable to wan/lan port of Linksys Velop Pro WiFi 6E and startred. I have one 1Gb home fiber connection and I can confirm that now my Iphone 15 Max Pro clock 922Mbps at 6Ghz using channel 1 I tested using Speedtest app.

Product was not new, incorrectly sealed and wires missing

Not meet my expectations And interface very basic

I am very tech-savy - worked with many routers in my life. This set is a nightmare. Setup is horrible and nodes were are working properly.

I added it to my mesh network with eight other old Velop, and it is really easy to set up and it is very stable.

Before I start I will say that nothing will improve the broadband speed to your house other than obtaining a faster internet service. If you are limited to an ADSL service then really chances are whatever router box that was provided by the service provider is as good as it will get in term of broadband speed. What these devices can do it ensure the wifi network speed inside your house operates quickly and minimises dead spots where the wifi signal is weak. If you have ever looked at your phone an date wifi signal has one bar and the internet does not work it is in a "dead spot" I do not think these devices have an inbuilt ADSL modem so if you have ADSL broadband you will still need your current box to provide the connection to the internet. If you have Fibre then you can connect the Fibre modem straight into one of the Linksys devices. = Why get the Linksys Velop Pro WiFi 6E Mesh System then?= The main use is to replace your existing router with one of the units and place the other unit elsewhere in your house. They are not the smallest devices but the smallish towers are aesthetically neutral. They don't have multiple external antennas and with only two network ports on them and a power cable they are not going too have numerous cables attached to them. = Setting up the devices = This was relatively painless. You just need to make sure you have your existing broadband logon details and any specific settings you provided needs. They require an app available from apple/android stores and when they are first turned on they have a special wifi network you connect to to allow them to be set up. It pretty much holds your hand through the process. Just make sure you are next to two power outlets as You will be asked to turn on the second device so it can be set up and paired. Eventually you will create the wifi network for your house and the app will explain that you will be disconnected from the current setup wifi network and to reconnect to the one you just created. One both devices are set up you can switch of the second device and relocate dit to where you want it. Job Done. The app allows you to check the signal strength between the units so look for a stong signal between the two if you can. = The Wifi Network = No complaints with signal strength etc though be aware that passing through walls etc weakens it. Dont expect miracles and any device faces this challenge. The Linksys has three Wifi bands it uses 2.4,5,6 Ghz which wifi speed favouring the 5 + 6 bands. If your devices supports 6 or 6E wifi you will find your devices errs towards the best signal. For a modern device this will all happen automatically. = Whats Mesh = Essentially both devices create one wifi network in your house and as you move out of range of one device it swaps over to the other device to maintain a strong wifi signal on your device. You can if you want connect both Mesh devices together via a LAN cable. This helps avoid issues if the distance between the devices, or the physical barriers between them otherwise results in a weak connection. Using mesh you could also place another device in the middle point. My top tip. If you are buying a new house are gutting a place out. Put in a cabled network with network ports on the walls in rooms (Like phone sockets). It's not that common but will ensure your house is best set up for internet connectivity.

Posiadam Linksys Mx 5300 i mając iPhone 14 Pro Max nie odczułem żadnej znaczącej różnicy przesiadając się na Velop pro 7 . Moim zdaniem Mx 5300 ma lepszy zasięg od Velop pro 7 prędkości identyczne nawet chyba troszkę gorsze na Velop pro 7 . Rozczarowany .

Bardzo fajny i wydajny sprzęt

C’est un investissement sur du long terme. J’utilise énormément le wifi et je ne connecte que le NAS en filaire car je connecte les appareils en wifi. Et donc pour avoir une utilité de ce que met mon FAI comme débit théorique à la disposition, j’avais besoin d’un investissement pour augmenter le débit par wifi. En fait, selon mon avis, il est déjà trop tard pour passer au Wifi 6 et il est plus judicieux de passer au wifi 7. Maintenant, j’ai payé trois bornes 625€ Pour ce prix, la solution entrait en considération malgré un prix conséquent Mais oui, j’ai des débit proche de mon accès à internet proche du giga et il y a des déperdition dans le bâtiment en fonction d’où on place les bornes mais dans l’ensemble, tout le trafic est grandement amélioré et satisfait ma demande et celle de ceux qui en bénéficieront sur des années à venir. En wifi, j’avais 67 Mbps avec la connexion wifi de mon FAI alors que dans le bâtiment désormais on n’est pas en dessous des 500 Mbps plus ou moins Je parle ici d’une solution dans le domaine du privé Mais en entreprise sur le réseau social de la marque à la fenêtre, je vois les sociétés informatique qui propose cette solution de wifi 7