BONTEC TV Wall Bracket, Universal TV Wall Mount for 32-70 Inch, Extra Long Articulated Arm 850mm, Tilt Swivel Rotate Full Motion, VESA Wall Mount Max 400x400mm, 60kg Load

Just mounted it now. Perfect. Very sturdy, looks great. Long arm, tilt & rotate very useful. All very easy to fit, comes with everything you need aside from tools for drilling etc. also comes with a template if you're not great at marking. You will need a 12mm masonry drill bit which most sets don't come with, so order one on here if you don't have one. Very secure, exactly what we needed. Great value for money.

This is a quality item, make no mistake. It came with a good set of instructions, all the bits you could need ( almost) and ( apart from the weight) was pretty easy to fit.Once up it looks great, it is SOLID. It is easy enough to move, but stiff enough that it will never become loose or move by itself. Criticisms, ver few but I'll try. In the instructions it doesn't actually state what drill size to use ( for concrete/brick ). It is in fact 12mm, I made a pilot hole with a 5mm bit for accuracy as the 12mm bit is a bit wieldy.The enclosed template works well, but make sure you know which 6 holes you will be using. A tiny point was that when adjusting the tilt, if you take it to the max, the enclosed spanner won't fit the bottom nut! Bit of an oversight, but an open ended 10mm spanner will do the trick. Overall it is excellent, well worth the money, highly recommended.

Very sturdy. Very easy to fit even included spirit level, spanners and screwdriver. Easy to understand instructions. Tilts and easy to make static

Heavy duty wall mount. Works well and is very easy to install. Just pay attention to the type of wall you mount it to. The instructions are very clear on this. Good wide range of adjustments. It a bit stiff to move. Could do with being a little easier to position. I mounted a 50 inch tv to the wall, it holds the TV very well. Good functionality with wide adjustment range. Very complete kit with lots of screws and mounting washers to suit the back of most TVs.

This is a superbly constructed TV bracket. I have a 55" Sony TV on mine and it barely deflects a millimetre at full extension. My TV is at 90 degrees to the wall and there is still at least 30cm between the side of the TV and the wall. I would guess that there would still be room if it was a 65" TV too. The hardware supplied is great. I have old flint block walls that can be granite hard and powder soft at random points. I used a 10mm masonry bit even though they were 12mm wall plugs and that worked fine. If you're confident the wall you dril into is a modern, uniform material then use a 12mm bit. Anyway, the 6 supplied bolts and washers work very well. Supplied with the bracket was the usual collection of bolts and washers for attaching your TV. It was a bonus though to have an HDMI cable and several velcro cable ties supplied too. The only issue I had was when it came to levelling the TV once in position. No matter how perfectly level you mount the bracket to the wall, the TV will always come out of level when at full extension. This is why there is a +/- 3 degree adjustment to compensate. Now, your bracket may be different, but the four Allen bolts you loosen to allow adjustment on mine were tightened in the factory to an exceptional torque rating! I'd never rounded off an Allen wrench before...I have now! Perhaps the quality of the supplied wrench was below par but, even so, my fingers had a wrench shaped indentation on them for quite a while afterwards. I had to use a Wera set I have and my cordless drill to loosen a couple that were too rounded off to do by hand. So, I suggest you loosen those 4 bolts before you've mounted it to the wall. It will save a lot of bother. In summary, then. A superb product you can trust your precious and expensive gogglebox with. Just check the torque on those bolts first. Recommended. :)

Great bit of kit very strong and sturdy works perfectly

This is a great tv bracket. I wanted something with a long extension for when family come over to watch a movie and this extends to nearly a meter. I love that you can adjust the height of the screen by the brackets at the back as I was worried I wouldn’t get the height quite right when fitting the bracket to the wall. It’s quite a heavy and daunting bracket, especially as my 42” tv is quite light. I was worried it might be overkill and was close to returning it, but I’m so glad I didn’t. It looks great, is relatively easy to install and overall I’m very pleased.

Good sturdy product with the range and flexibility I required. This currently holds my 65inch TV in a media wall. I needed it to extend out and swivel so I could get to the back if needed. Had this for about a year and it is perfect.