AMOLEN TPU 3D Printer Filament Bundle, Transparent Multicolor Rainbow TPU 1.75mm, Color Change Flexible Soft TPU 3D Printing Filament Supports High Speed, 200gX4 Spools

The AMOLEN Carbon Fiber PLA filament bundle is an absolute must-have for both hobbyists and professionals. The matte finish across the four included colors—Black, Dark Grey, Sapphire Blue, and Burgundy—adds a sleek and professional touch to every print. With 200g per color (800g total), it is perfect for experimenting with multiple hues without committing to full-sized spools. Performance-wise, this filament is exceptional. The 15% premium carbon fiber content makes it lighter, stiffer, and more durable than standard PLA, with lower warp, minimal shrinkage, and excellent layer adhesion. I’ve had great success printing complex parts like UAV components, model aircraft joints, and drive mechanisms. The self-supporting properties make supports incredibly easy to remove while still leaving behind a smooth surface, which is a huge plus for preserving detail. The dimensional accuracy of ±0.02mm ensures consistent feeding and precision prints every time. Printing is smooth, with no clogs or bubbles, thanks to the high-quality USA-sourced raw materials and careful vacuum sealing. The perfect winding and tangle-free spooling make loading simple, and the recommended settings (190-220℃ print temp, 0-60℃ bed temp) have worked flawlessly. It’s clear that AMOLEN takes pride in its product quality and excellent after-sales support. If you’re looking for a versatile, strong, and visually striking PLA-CF filament, this is an outstanding choice. I will definitely be ordering again.

We got my son a Toybox 3D printer for Christmas and he wanted some additional colors of filament. This bundle works perfectly! He has printed several things with all the colors and there have been no issues. It is great quality, no clogging up the machine, and the prints turn out great. We will be buying more colors!

Printed beautifully right out of the package. These are smaller 200g rolls so be aware of how much your project will require. Might be a bit more because my project used 209g with supports and I still had some left on the roll but not much. I use a Bambu A1, Printed the sugar skull shown below with the Blue/Fuchsia at 220 and 55 on a cool plate. Supports came off super clean and skull was beautiful. I should have used a brim as I got slight pull up on the bottom edges. Probably should not have used the cool plate either and gone textured. Great filament and would absolutely buy a bigger roll next time. Great trial size.

This is a set of beautiful colors. I love the shine it provides to printed things. The print quality seems on par with anything else I have used. My main issue happened on one spool (so far). Once the filament got down to about 1/3 remaining, the filament became extremely tangled, making it impossible to feed the system. I tried to unravel and place back, but that became a very tangled mess and resulted in a good amount of wasted filament while the remaining filament is still a mess. Overall, this is a nice set if the situation I had was a lemon-type situation and this is not a common occurrence. Edit: I am impressed with customer service. Not only did they reach out to remedy the situation, but they also asked for information on the label so that they could check the product like. I love when a brand trouble-shoots their products, stands behind them, and has great customer support. I would definitely do business with this seller again.

This works wonderfully when you have it configured to the right settings for your machine. I am brand new to 3D printing, I am using the FlashForge Adventure 5m PRO and it took me a while to get the right settings; I ended up using chatgbt to go over every category in orcaslicer per my machine and choice of filament. Highly recommend! These silky prints printed beautifully! A lot of comments here say this is junk, I guarantee it’s because their settings are off. Configure your settings, do test prints, use a quality machine and it’ll print correctly.

As fun looking as this pack is, it was not functional at all. In fact I spent most of a day trying to figure out why the blue/silver filament would only print half way then the object would move and mess up the print. I tried 5 times. Cleaning the bed, using alcohol, trying adhesive. Nothing worked. I tried printing the object with a different brand filament. No problems at all! I chalked it up to needing a bigger base for printing with this type of filament. Then a couple days went by and I went to try to print something else. I saw the blue/silver filament broken in channel 3 of my 4 channel multicolor 3d printer. It took a lot of research to figure out how to take things apart to get it out. Then I still had an error when trying to print with the red filament. I took things apart even more and found another broken blue/silver piece further in the unit. Then I tried printing again. It looked like it was going to work. The red filament was feeding through. Then I got the same error. After another 2 hours of research and taking more things apart, I finally found a piece of the red filament had broken off towards the bottom of the 4 in 1 connector. Thankfully I was able to end up getting it out, and I have been able to print just fine with a different brand filament. The reality is, this brand filament in the package was terrible. Not just 1 but 2 of the filaments broke inside my machine. I did not try any other colors. With all of the problems and troubleshooting I spent about 10-12 hours dealing with the issues. Not worth taking a chance with this stuff. Packages returned. Refund given.

Second time purchasing! Great filament. Happy with the coloring and the prints. Will be back for more as we need it!

4 carretes en un mismo empaque

J'adore le rendu de ce pla. Impression hyper facile comme du pla classique, j'ai passé les 4 bobines sans aucun bourrage ni decollage du plateau. C'est tellement dommage qu'il soit presque introuvable en europe, c'est vraiment un excelent produit

It tends to clog the nozzle if I use the recommended hot end settings. Some filaments seems to burn when used on temperatures near the upper limits (wood and marble). It prints beautifully at low temperatures, but keep an eye out for clogs.

Produit bien emballé avec les indications d impression pour chaque filament top! Le gold avec l effet paillette ( on dirait un translucide avec des paillettes or dedans) est du plus bel effet qui change des autres couleurs ors. Le bronze aura été dans mon cas une catastrophe quelque soit la vitesse recommandée 30 50 , meme a 20 pour la 1ere couche , et la température recommandée, ma buse se bouche un moment ou un autre... reussi seulement a imprimer un cube xyz qui bizarrement etait propre. Je compte tester les 2 derniers mais je reste dubitatif surtout pour le bois. C est pour cette raison que je ne mets que 2 etoiles pour le moment en attente de voir les resultats positifs ou négatifs des 2 dernieres couleurs. MAJ : Après avoir discuté avec la compagnie, il s est avéré que la bobine bronze a pu avoir un souci d emballage qui sera remplacé sous peu. J ai pu testé la bobine marbre et bois et la qualité et la couleur sont du plus bel effet! Ps: je vous conseille une buse de 0.6mm pour le bois ( en général pas seulement cette marque ) pour eviter le bouchage de buse.

0 quejas. Todo a pedir de boca . Con todos los que he probado . Quiero bobina grande 🙂