BoYata Magnetic Phone Ring Holder, Dual-Sided Magnetic Phone Grip, 360° Rotating Adjustable Finger Ring Stand Compatible for MagSafe Case, iPhone 15/14/13/12 Series, Samsung, Android & All Phones

I must have had six or more of mobile phone stands or finger loops on the back of the phone, which have all disintegrated within six weeks.I honestly don't think this one's going anywhere it's built well the magnets work and the finger ring security works also. The bonus as well is the stand which is a solid as A rock 5 * all day .

Pretty sturdy, useful phone ring holder. Does more than the average ring holder.Pro's:- attaches securely and strongly. I'm not sure I know how much stronger an N55 magnet is compared to average, bit it seems strong enough to stay firmly attached- the hinges are sturdy and strong (let's hope they stay that way!)- The extra 'arm' allows you to use the ring holder to stand the phone up in landscape/portrait at lots of different angles, and all while holding the phone securely- you can switch the holder 180 degrees to allow different options for 'standing' the phone (although it doesn't spin, you have to remove the holder and attach it again)- the holder has a magnet on the front, to allow you to 'stack' mag devices, or simply attach it to a metal object (although there is a 'con' for this, see below)Con's:- I struggle to get the holder out, maybe a little more use might help, it'd be good to have a small cut-out on the straight bracket to get your nail in- when i stuck it to my fridge, it held very firmly, I was happy there was no way it was going to fall off, but when I pulled the phone off the holder stayed on the fridge. I suppose this is expected, way more metal on the fridge than my phone, but then I had to pull the holder quite hard off the fridgeOverall, a clever and decent ring holder. It'll be staying on my phone until something better comes along.

I found the key ring to be versatile and the magnet to be strong enough. It was 100% what I needed.

I have been looking for a strong phone ring for a while, since my old one resulted in my phone falling because the magnet wasn’t strong enough. This magnetic grip is so much better, providing a secure hold, and eliminating any risk of falling.Compared to my old one, this one has a double-sided magnet to make my phone instantly attach to any magnetic surface, making my hands clutter-free. It also lets me flip my phone 360 degrees, allowing me to take pics easily.This ring is compatible with-15 series-14 series-13 series-12 seriesBut can be compatible with other phones when you use the metal ring includedThe packaging includes-1 magnetic cell phone grip,-1 metal plate-1 metal ring-1 manual that was helpful to read about functionality.Would recommend.

The hinge on this is very sturdy, on both hinges the rings stay in place as you would want. The magnet to attach to your phone is very weak though. Like it’s not going to stay on as strong as you are currently thinking it will. It’s weak, the magnet comes off easily. So for that reason, 3 stars. With some stronger magnets, 5 stars.

I don't generally like those pop-out things that stick to the back of your phone. I ordered this because it is magnetic and therefore gives me the option to have it on the back of my phone or to take it off - far preferable to having something bulky permanently stuck on.Despite my phone being a 'ruggedised' handset and therefore pretty large and heavy, I don't really see the need to use a ring holder to secure it in my grip and have managed so far without one. However, as I am sometimes trying to use my phone in situations where it would be a nightmare if I were to drop it I thought I would give this a go. As the holder is magnetic I can always take it off when not required (note that you do need to permanently stick a little metal ring to the back of your phone but this is very thin and makes almost no difference to the thickness.So far I've used the ring to secure my grip maybe once.BUT....Using it as a kickstand has been fantastic! I must have used this a dozen times within that first 36 hours of fitting it! I've watched videos and held video calls with my phone propped up perfectly in front of me. When some of my calls last well over an hour and my phone weighs over 350 grammes this has been a game changer! The holder can also be rotated easily (as it is magnetic and not fixed) which allows for both landscape and portrait viewing.Suits my needs perfectly - very happy!

So I would say this is more of a stand accessory because I'm using to ring attachments to be easy to pull out, but this one is more stiff, which makes it incredibly sturdy, but that just means it's more ideal for setting up camera shots from different angles using the ring to balance it. Compared to other MagSafe rings, this one does not spin, so you can't really play with them or rotate as easy; you still can but you'll need to rotate the whole thing with it still magnetised.

A chunky "magsafe" ring that can be installed vertically or horizontally on the iPhone.The arm extends out such that it could be used to- hang the iPhone from a string- stand the iPhone up (pictured). The combined length of the arm and inner ring allow multiple angles to be achieved.- Securely hold the phone with one finger through the inner ring.The magnetic attraction on to the phone is strong. The magnets on the ring then allow for another "magsafe" accessory to be mounted on the back and charge through the ring. As an example the phone can be placed onto a magnetic stand and phone is charged. It adds an extra 37grams to the weight of the phone which on my "T" shaped night stand made it a little unstable (was still in its 41g case).The wallet (card) magsafe attachment I have was not secure enough for use, but then I didn't expect it to be.A stick on metal ring for attaching to a non "magasafe" phone is provided. As is a metal circle for mounting the phone to another surface. I have not used either of these.Overall I like this magsafe ring for holding the iPhone securely (not dropping it) and standing the phone up.

Some back story: I had a ring grip/kickstand thing on the back of my phone before, but it made putting my phone in any sort of mount a huge pain. I like to play Pokemon Go while I'm biking (or rather, keep an eye on what's around so I can stop and catch things or take gyms) and it helps to have my phone mounted to the bike. But the attached ring grip made it stick out in the back and not fit right in any mount I'd tried (and I've tried a bunch).I got this because the entire magnetic phone grip part can come off, so I could put this in a bike mount while I'm riding and then put the ring grip back on when I'm done.It works great for that purpose! I first tested it by placing the magnetic ring under my phone case (just to see how strong it was) and it held reasonably well even through my phone's case. It was relatively easy to get off and I wouldn't have trusted it with any seriously shaking or sudden bumps. After testing that, I removed the backing and attached the ring to the exterior of my phone case. The adhesive is strong and this seems very stuck to my phone. Once this is on the exterior of the phone, the magnet latches on VERY strongly. Both me and a friend shook it around by the ring grip and it would not detach from the metal plate. The first time I tried to detach the ring grip from the phone, I was actually worried something was going to break, but everything was fine. It just takes a bit more effort than I expected!It comes with an extra metal plate in case you want to attach the grip to something else, I guess? Or if I switch phones/phone cases at some point, I won't have to worry about detaching the old ring and moving it over and can keep the same ring grip.It is also nicely compatible with a magnetic car mount I got. I have a little hook that works with ring grips in my car, but it blocks the view of some of my center console because of where I had to install it. The magnetic car mount was pretty much the same size exactly, so now my phone is ready to help me navigate with GPS in the car, go on bike rides, or just help me keep my grip on my phone while I'm wandering around. And if my phone needs a lower profile for some reason, the ring grip comes off!Really happy with this!

This is a very strong magnetic ring holder and I love its versatility as both a ring holder and a kickstand. The strength of the magnet erases any doubt that it might accidentally separate from your phone. I am using it with a magsafe case, so I can't speak to its use without a case. The hinges are stiff enough to keep the phone propped up, whether you use the kickstand in a portrait or landscape configuration. I look forward to using this on my next plane ride to watch a movie on my phone. That said, the hinges are almost too stiff making it a bit difficult to open / pullout the ring when it is folded closed/flat. I suppose if you have long fingernails to pry up the ring, this won't be an issue, but I find it difficult deploying the ring without out tapping my phone to deploy it (see video). I might either add some grip tape to the side of the bar connecting the ring and the magnet, and/or tie a small loop of sting to the ring to assist with deploying it. When folded up, this magnetic ring is compact and does not protrude and more than a pop-socket type of holder. The description depicts it sticking to/being compatible with magnetic car mounts, but at least with my magnetic car mount, the polarization of the magnets causes the ring to mount offset, vice lined up, resulting in it falling off with the first bump in the road. So for me, I remove this ring holder when in the car. Overall, I am happy with this holder and this is a solid 4-star item. If the hinges loosen up to make deploying it easier that might be good, as long as it doesn't compromise the ability to be used as a kickstand.

I use a Samsung phone and have a steel disk on it's case to use magsafe accessories. I wanted a pop socket like ring to hold my phone a bit more securely and got this ring. The magnets on this are crazy strong. When taking the ring off, I have to press the case down with my other two fingers to ensure it doesn't come off. The ring is comfortable on my finger when I use it like a pop socket. On top of it all, the ring doubles as a horizontal or vertical stand comfortable. The horizontal is a lot more stable but the vertical will work in a pinch too. The joints have sufficient friction that I am not concerned. Finally, the magnets work on both sides so you can now stick your phone to steel surfaces such as a fridge or a gym machine. I tried both. At least on my phone (s23 ultra) the phone remained fairly stable. The back surface attraction is good but not super strong. I didn't feel that it would detach accidentally from a fridge /gym machine or other steel surfaces but also make sure you are not shaking the surface either.Overall, a solid ring. Deserves full 5/5

The media could not be loaded.  You would think this thing is part of your phone the way it sticks to it. It is very well-made with tight hinge connections. Folding it out into the stand is very easy, and it stands in just about any position, and folding it out to hold seems to be second nature. With it having so many ways that it moves you can always find a comfortable way to hold it. The ring is very smooth and comfortable and is a bit thicker too, so it doesn’t cut into your finger like some thin rings. This whole thing has a bit more bulk to it. I would not call it slim. It is rugged and tough, but it is going to stay on your phone, and that is what you want. You can charge your phone with it on as well, so there is no need to remove it.In the video in the box there was a ring to put on a cell phone or case without the magnets for the phone holder to attach to. There was also a metal disc with blue protective plastic on one side and there was a very gooey, thick, pliable tape, almost like glue on the other side. These are made to be applied to various types of surfaces from porous to smooth. Their use is if someone wanted to attach their cell phone to a particular area that is not metal or magnetic. This phone holder will stick to any surface that is metal. I stuck it to my refrigerator and I put it on a few different chargers and it does charge up and it didn’t seem to get hot either.This is the only thing that I have ever seen that I would trust to stay on my phone to carry it around, or to throw it in my purse, and stay on my phone while on the charger when I’m driving.

This phone ring holder is just alright. It does its job in holding the phone, but the magnet isn't as strong as I hoped. The build feels durable and the rotation is smooth, but the ring is almost IMPOSSIBLE to pull out (there is nothing to grab with your fingernail). All in all it's an average accessory. Not terrible, but I wouldn't recommend it.