Pack of 32 Divider for Small Drawers Plastic Storage Hardware Cabinet, Compatible with Akro-Mils 40716 (Small Drawer Size)

First off, I really resent that there is such a need for a third-party product like this because nearly all companies neglect to include them anymore with the units and some don't even make them available for purchase! What is wrong with American these days...ugh. But secondly, three cheers to these guys for doing something about it and taking the time to do it right. I'm not super fond of the softer poly plastic drawers that everyone uses these days and it seems that a couple simple design features have disappeared from all of the smaller ones, but they do certainly work better with inserts even if you don't need the smaller compartmentalization. I got these to fit in a Craftsman unit (which uses the same smaller drawers as a host of other brands now, most of which are made in Malaysia by the same factory). They fit great - not too wide, not too thick, seals up the bottom edge just great. Hard to measure accurately but the slots on mine are about 0.06" and these inserts measure (accurately) 0.09" for a good fit while not being overly snug. I was a little concerned when I saw the thickness stated as 0.10" because that would start to get too tight (maybe not for the Akro units?) but what I received worked out great. The larger drawers on my 39-drawer unit won't work with the "large" dividers these guys sell, but I'll make some for those. Incidentally, Harbor Freight still sells an old school stiff/crackable drawer organizer unit that only comes as a bolt/nut assortment for around $16 - that's worth considering and it comes with a whole bunch of the dividers. They are thinner and smaller but those dividers do work with most drawers if you don't mind a looser fit. Also incidentally, the housing box of the Craftsman unit is just slightly different like the Flambeau (probably same factory if Flambeau isn't actually doing it for them) and has better reinforcement on the back side plus better stackability and/or a convenient tray on the top side if you don't stack...but same drawers as everyone else uses now. Thanks for this divider solution - much appreciated!!

The look nice and sturdy!! High quality

Very sturdy divider for the larger drawers. Definitely work well with no give and will not be forced out of position by the contents of the drawers.

I have purchased other bin dividers and have had very little luck finding ones that fit tight and will not move around. I installed the dividers in my Akro storage unit and these dividers are fantastic. They installed easy and didn’t move around once seated in the bins. I have loaded all of my parts and have not experienced any parts moving from front to back even with small washers that tend to slide under the dividers. Highly recommend!

I thought these were really nice and I would absolutely buy them again. 2 things to keep in mind. First, they're laser or machine cut (done very well) so they have the blue scuff shield on them still. You can use them like that, it's a bit tighter fit but it does work. If you choose to remove it you may want some assistance if your hand dexterity is not what it used to be. Second, the slot tolerance on the dividers for the large drawers could be a little tighter. The long pieces fit well into the slots of the drawers but the cross pieces wobble a bit. I suppose making the cross pieces just a little bit longer might also remedy the wobble. Once you get stuff into the drawer though you don't really notice it.

I was a little hesitant when I saw these listed as “Chinrestpapersource” and thought “What the heck! Figured they’d be coming from China but needed them desperately. When I pulled them out of the envelope I about had a come-part. They’re Blue!! No, they are NOT blue. They have a protective film on them that makes them look blue. Clearly this has been a matter of concern because the first line on the package description is “The dividers are clear”. They’re nice and sturdy , provide a very snug fit that will eliminate the slipping (thereby allowing drawer contents to mingle) I’m extremely pleased with this purchase. A definite upgrade and superior product to the dividers that came with my Akro Mils unit.

They fit perfectly!

This review is for the small drawer dividers. These alternate dividers are very nice and you get quite a few more for the same money vs. the Akro-Mills dividers. These are thicker as well, so they wedge into the drawer tightly (tight enough they appear to not work loose on their own, but not so tight that they can't be inserted at all). When fully inserted they appear to fully seat and close off the small gap that is usually left by the Akro-Mills dividers. So these also appear to prevent a big problem with Akro-Mills standard dividers, they are loose fit and often rise up in the drawer, allowing small items to migrate underneath the divider. These dividers appear to very likely prevent that occurrence. All in all I am happy, and for much less than Akro-Mill's price, I have 64 dividers which will let me divide all the drawers I want to divide, and likely have a few dividers left over.