12V Cigarette Lighter Socket, 2 Pack Car Marine Motorcycle ATV RV Lighter Power Outlet Socket Replacement 12 Volt Waterproof Plug by ZHSMS

The 12V Cigarette Lighter Socket was exactly what I needed for my boat. Installation was simple. It provides consistent power and has worked great for charging phones and running small accessories out on the water. The fit and finish look clean once mounted, and it is waterproof and durable enough for marine use. If you need a reliable 12V outlet, this one does the job without any issues.

I bought this 2-pack of 12V Cigarette Lighter Sockets (Red) to use in my battery power box, and they’ve been a great addition. Having a cigarette lighter socket provides a lot of flexibility for powering various 12V devices, and these sockets feel solid and well-made. I especially like the red-colored LED light, which is a nice touch and helps indicate power status. Very happy with the purchase. Potential Uses: Powering 12V devices from a DIY battery power box Automotive, RV, boat, and motorcycle electronics Charging phones, tablets, or USB adapters via a 12V plug Portable fridge or cooler power supply GPS, dash cams, or other vehicle accessories Camping or outdoor electronics setups DIY projects requiring a 12V outlet Key Features: 12V DC power outlet compatible with standard cigarette lighter plugs Waterproof design for outdoor, marine, or automotive use Solid, durable construction for long-lasting use Red LED indicator light for easy power monitoring Easy to install as a replacement or in custom projects Suitable for cars, motorcycles, boats, ATVs, RVs, and battery boxes Disclaimer: This review reflects my personal experience only and is not professional electrical advice. Always follow proper safety procedures and ensure compatibility with your devices and power sources when installing or using electrical components.

Seems sturdy to replace the broken one in the boat. It doesn't feel cheap, it seems like it's durable.

I ordered several of these and installed them on my boat several months ago. I live aboard with my wife, so they've seen a lot of use in that time. I'm overall pleased with the quality of the sockets themselves. They install easily, with male spade terminals hard-mounted on the back of them for easy connection to the wiring harness. The good: * Sockets work at both 12v and 24v DC (they're not rated for 24v but I haven't seen any issues) * Sockets are standard diameter and depth so they don't have any issue fitting in as replacements for older ones The bad: * They're listed as for marine use and the sockets themselves seem fit for purpose, but the wiring that comes with is anemic (undersized), not marine wire (fully tinned strands), and the terminations are weak and sometimes easily pulled off * The inline fuse may or may not work but I've had two of the fuse holders melt until one of the wires separated (which should never happen) while passing less power than the fuse was rated for. Bottom line: the sockets are great and worth the cost but throw away the included wiring before you're tempted to use it. It's not an exaggeration to call it a fire hazard and it gives you a false sense of protection. Fortunately, all of mine are installed after 5 or 10a breakers, so the fuses are redundant and I would've been protected from a short resulting from the failure I mentioned. I've since replaced all of the wiring with more appropriately sized and properly terminated Ancor wire and terminals.

Mounted these inside my pull behind my motorcycle trailer to charge anything that is needed up while driving down the road. Work perfect.

Hooked this thing up and plugged in a 300w 29a inverter. This resulted in a failure/melting of the body where the wires connect in the back. Not sure what this is actually rated for but I may have expected a little too much. Be careful folks.

Good and useful product. Good quality and functionality. Fast shipping and delivery. Good seller. Recommended 100%.

The fact it comes with a 10amp fuse "implies" it could handle up to 10amp draw. This is not the case. Under a 5amp load the plastic housing of the included inline fuse melted. The FUSE was fine. It has not popped, just the plastic housing had melted so the contacts pulled away. Fortunately! I was nearby during the "smoke test" but did not watch it closely enough to see it happen. Be careful with this if you intend to use it for anything other than maybe cell phones, etc. I'd be cautious even running something like a 12v fan off this with 2-3amp draw. Going to cut out the inline fuse and connect direction to a fuse block with a 10amp blade fuse. Will monitor VERY closely and see if the wires can handle it or not but another review mentions the plug itself melting so I'm probably going to end up looking for something else UPDATE: I did as I said, cut the inline fuse out of the wire and ran it to my fuse block which already has a 10amp fuse. Plugged in my 5amp load and carefully monitored this time. The wires themselves heated to about 125 degrees F and after about 5 minutes the metal tongs that let you slide the wire leads on and off MELTED the plastic in the actual outlet and started to fall out. Disconnected load and let it cool. It *might* work for small loads like a single 12v fan or a cell phone charger but I would not run something like an inverter off this or charge through it. Just won't stand up.

So far no issue

Bought these to fit in my 2016 Ford Fiesta. I purchased the top spec model of the Fiesta but for some reason Ford decided not to include a boot and rear passenger 12v socket despite including a place for them in the plastic interior panels. These were just plugged with covers from the factory but the wiring was in place behind the cap. These sockets were the perfect solution and only took me about 15 minutes to pop the caps, splice the wires in and screw the sockets in place. Quality is good, but the locking rings are bit fiddly and can snap if overtightened so just be careful when installing.

Expected 2 x wires and 2x 12v lighter sockets, ended up with the delivery being just the two wires. The package delivered was secure, and flat, so it must have been shipped without the 12v sockets from the warehouse. Probably just an unfortunate mistake, these things happen. But really needed this product today for a project so no good if the sockets aren't included!

excellent

للاستخدامات الخفيفة بدون أحمال عالية سيؤدي الغرض