SyminoGaming Chair, Computer Chair with Footrest, Headrest and Lumbar Support, Ergonomic PC Chair, Height Adjustable Rotating Task Chairs, Gray

First off, I was disappointed to find a broken rubber ring (part of the foot rest slider). I was expecting to contact the seller after finishing assembling to request a spare. Then lo and behold I realised there's a separate compartment in the fixings pack with a spare of each type of bolt, cap, and even one of these rubber rings. Yes, the chair even came with a spare rubber ring. I was impressed by this.Assembling the chair was a little fiddly, with the instructions often glossing over key details. But this is common with any such product and anyone who's put stuff together before and takes a bit of time and patience will be fine. An example is the plastic covers over the back rest hinges. It takes a bit of "this doesn't feel quite right" to realise that you need to locate a spindle on the hinge with a hole in the cover. If you miss this detail, you can still bolt the two parts together, but they won't be properly aligned. This wasn't highlighted in the instructions.Having put it all together, I was a little surprised by just how firm the padding was. My old chair was a bit of an executive armchair, which was much more giving to sit in. Having said that, it all feels comfortable. I wasn't sure what I'd make of the neck and lumbar pillows. I've tried retrofitted lumbar pillows before and rejected them. The pillows with this chair both feel like they belong there. It's easy to adjust the height of the lumbar pillow, which pretty much stays put, held in place by the sides of the back. Even the neck pillow feels comfortable enough. Time will tell, but I have the feeling that in a normal working position, this is a very good combination of firmness, softness, and support. I feel comfortable and supported whilst sitting up without feeling like I'm slouching or sinking into poor posture. When reclining, though, the pillows and foot rest come into their own. In my old chair, reclining would force the small of my back down, which wasn't good for my spine. My legs also had no support. This chair solves all those problems. Unlike the fixed arms on my old chair, the arms on this fit easily under the desk. This was a bit of a bug bear with my old chair.All in all, this is a great chair. It should score highly in both comfort and posture/support. It's easy enough to assemble, and the spare bits were very much appreciated and point to the thought that went into design/production.I had two slight niggles. I'm not used to twisting arm rests, so I have the habit of pushing against them even getting out. Of course this makes them twist and move underneath you, undermining your balance. This is probably just a "get used to the difference" thing. I also found the casters were a little reluctant to change direction. Having pulled yourself up to the desk, it required more effort to persuade them to turn 90 degrees so you could shift position a little left or right. I actually want to perform this action of wiggling left or right quite often, so this quickly felt irksome. They may ease up over time, but I solved this particular niggle by swapping out the supplied casters with the ones from my old chair (ahh, old faithful, some of you lives on).I'll update this if I find any comfort issues after spending full days in the chair. Otherwise, assume I'm getting on great!

Very comfortable and ergonomically made for good back and neck support. With many hours of gaming already done, the wide, long & soft base cusion has very good for hips, coxyx and bum too (semi-bucket). Haven't felt any fatigue or discomfort. With it still being pretty new (received and built 27/12/24) the back and height adjustment is still a bit stiff but hoping this will ease over time. Still moves freely and the chair is easily adjusted to suit height and back rest to your personal requirements.The suede finish is a really nice touch to set it apart from other gaming chairs I've looked at and goes well with where it's situated as well.Very well made and sturdy with great easy to follow instructions on how to build which took me about 45 minutes cause I wasn't rushing and wanted to enjoy the experience. Which I did and now happy as happy can be.I personally think this product is excellent value for money with what you get.Really hope this helps someone decide on a good, comfortable chair for their office or gaming as well.

I don't normally write reviews for products that I have purchased but when I assembled this chair, I was really impressed. Build quality, comfort and everything about it.Easy to put together. I had an issue with literally the last screw but that was down to me making it harder for myself. This gaming chair is an easy build, 30 mins or there about.I was impressed by the quality of the parts as each piece went together. you end up with a really and I mean really sturdy chair.Comfort. I purchased this chair to replace an earlier purchase less than a year ago but if using for long periods was not the best. Assembled this chair and could not wait to try it out. Really impressed and the comfort is wrap around.Headphones on, chair reclined and you will be in another world.This chair is worth every penny. It's the little things like the swivel in the arm pads depending on how you relax.Also the delivery was really quick and the product is extremely well packaged.If you are after a comfortable chair, Gaming chair, Work chair or whatever then look no further because this is what I consider the best purchase I have made in ages.

Firstly if you order one of these chairs, the box is in the region of 25 kg. Heavy enough, but there are no little finger holes in the box, so you will really need to have an extra pair of hands. The guy at the post delivery center was a big lad and had a good grip on the box and said point me to your car. It just fit into the boot. I then rolled it gently into the house.My chair came with German instructions, but the diagrams are plenty good to put it together.I did notice the base cushion felt as if it sloped down at the front and I felt like I was sliding off the cushion. I remedied this by loosening the 4 bolts and putting 2 washers under the plate each side on the front, this made if a lot better. The Foam at first was very firm but after a week or so it has become firm, but supportive; very nice to sit in. The recline feature is good as are the head and lumbar cushions.The only negative is when moving the chair in to the desk while sitting on it, as everybody does at some point, its prone to tilt forward if only one wheel is in the ahead position. It might not be a problem on a non carpeted floor. but I'm happy with my chair.