ELUTENG M.2 SATA NGFF to SATA Adapter (Not Support NVME/ M.2 PCIE) 6Gbps Dual NGFF MSATA B Key/ B&M Key SSD to 2.5" III Converter Adapter Max 4TB Support 2230 2242 2260 2280 SSDs

It works as advertised, you can only access one drive at a time via the switch.

Product arrived is not product advertised via photo or text descriptions. Product does not have parts needed for basic functionality. (1 out of 2 sets of M.2 securing screws are included) Product does not work.

Cheapest working solution for me. I purchased 2 adapters for the four sata nvme I had. This setup gives me access to 1tb of storage with another 1tb on a switch. Transfer speeds are to be expected of the storage interface and the USB protocol. It cost me roughly 15 dollars to utilize 2tb of storage I had laying about, YMMV.

This is a nice little board however, there is not much information about it's operation. After receiving, I can tell you that it does not have any side mounting holes, so you would have to mount to a drive kit. Also, there is a little switch at the top, that switches between the NVME's installed. You do not see both NVME's at the same time. It would be good to use as a flash drive if it was a USB interface instead of a SATA interface.

Works perfectly for M.2 SATA (not NVMe) — simple, sturdy adapter. Fits 2230/2242/2260/2280 B or B+M key SSDs, installs easily, and shows up as a regular 2.5" SATA drive. Got full SATA III speeds in my tests. Good build, affordable, great for reusing spare M.2 SATA modules. Simple and reliable.

I'm torn on this one. The item was not as advertised. It does not have a case/enclosure as pictured. It would be one thing if it says in the description "case/backplate not included," but it doesn't even mention it! HOWEVER, for my use case this isn't a big deal as I can 3d print an enclosure. I will update this review shortly when I have a chance to test the adapter, my rating my change. ALSO, when is finish my case design I will share the file here so anyone else can grab the design and 3d print their own enclosure/backplate :) Stay tuned, this should take me less than one week to complete the design.

Great adapter, plug and play. Easy to install and use and a great value.

There are several issues with this. 1) Product images show a case... There is NO CASE 2) Packing list shows the case..... There is NO CASE 3) Video for product shows a case... There is NO CASE 4) Generic standoffs are wrong height. If you put the drive between the knurled ends, the drive bows because of too much downward pressure. If you put the drive on top of the standoff and install a screw, it's lifted up too high, and can cause issues with the contacts. 5) Dumb selector switch. Every other dual M.2 adapter has an onboard raid controller. This one does not. it's simply a carrier board, with voltage regulation, and a stupid switch. You know, because every time you want to use the other drive, you should have to disassemble your computer case, remove the drive, flip the switch, then reverse the process.. Whoever designed this product should be fired. Whoever sells this product should be publicly shamed. I'm returning this, as it's just a pile of e-waste