led Strip Lights Waterproof,DC24V Strip Lights IP65,3000K Warm White,320LEDs/M,8MM Wide,16.4ft/5M,CRI90+,Outdoor led Strips for Bathroom Decor,Pool,Aquariums(Not Included Power)

This is a quality product that we are using for our bathroom niche. It really lights up the place. We have been using it for a year and it is working flawlessly.

I was looking for a good set up lights for my bathroom and didn't want "LED DOTS". Chip-On-Board (COB) rocks! Also being moisture resistant, these really fit the bill.I mounted them under the vanity using the provided sticky-tape backing. It (mostly) held up. There was a section I needed to reinforce with some stronger double-stick. In the niches I bought aluminum u-channel to further protect them. I coupled them with a PLUSPOE 24V 50W Dimmable LED Driver, 110V AC-24V transformer so I can dim them. I connected them to a Lutron dimmer switch to allow me to dim them using Alexa routines. Then, just because I had some footage leftover, I lit the inside of the cabinet.Amazingly enough, while the under-vanity and niche lights look great, the lights in the cabinet are life-changing. I can now see what's under the sink!Pros:- No "Dots"!- Absolutely not "Dots"- Did I mention - "No dots!"- ok, you can see some dots if you turn it down way-way-dim.- Good 2700K Color (like a standard incandescent bulb)- Dim pretty smoothly (I use these as the nightlight at 1%)- Bright - a 1 ft strip is like a 60 watt bulb- Since they are for a moist environment, they come with their own rubber housing. You can pull it out of the housing if you want to use just the strip.Cons:- Even on dim they are still reasonably bright, I set the Alexa Routine to 1% for night time- Like most LED's it was hard to find decent connectors, I tried three different ones and settled on 3528 2835 2 Pin 8mm LED Strip Connector Biantie La Unwired Clips. These fit into the aluminum U-channel- While the segments (the points at which you can cut the strip) are reasonably small, I ended up with some runs that were a bit short. You can't really see it inside the u-channel though- While you can wrap these around corners, you need to do so by sticking them to a wall, not a ceiling. I made that mistake and it was hard to turn the corner (you can still do it, but it's ugly. You can't see it in my application because it's under the vanity.- I could not get the solderless connectors to work consistently, so I ended up solderingOverall, I'm really pleased with these lights and anyone who has seen my bathroom is as well. I'd highly recommend them

Definitely worth it

I used 2500 for the niche and under the cabinet it’s the perfect colour to soften the place .Will definitely order more. Great quality and easy install

As pictured & described.The adhesive is strong and has held up despite a couple re-positions and living in a print enclosure where it heat cycles on the regular.Over all, happy with these.

Very even lighting!

I connected 3 of these LED Pandery COB light strips to illuminate my 40 foot green house. They do a beautiful job. These were easy to put together and connect to the driver, then I just plug them in. The strips were easy to put up as they adhered to an aluminum grid easily, which helped keep the straight line of lights. I like the soft glow, just about right for a party. I do not use the greenhouse for plants, so I was not looking for grow lights, but I think in the future they may work for that. The lights look nice from outside too.

The media could not be loaded. Eso no trajo donde cornetase solo la luz sola llegó