FIFINE Low Profile Boom Arm Mic Stand, Microphone Stand with Cable Management Channel, Desk Clamp, Screw Adapter for Streaming Podcast Recording, Adjustable Metal Mic Boom Arm Pink-BM88P

This boom arm paired with my Fifine AM8 microphone has been a fantastic upgrade to my setup! It’s sturdy and low-profile, fitting neatly under my monitor stands, and the built-in cable management keeps everything looking clean (plus it helps keep my cats from chewing on the cords). When I’m streaming or recording, I can easily position and adjust the mic how I need it. Being able to bring it closer to my mouth has noticeably improved my audio quality, and since it’s suspended, it also minimizes unwanted desk noise. Overall, I highly recommend the BM88 for anyone looking for a high-quality boom arm at a low-cost!

This is a surprisingly solid boom, low CG and about zero wobble. Even the clamp to desk is quality and perfectly does its job. Quality engineered and manufactured. With the articulated arm, and the socket end, there are enough degrees of freedom to suit anywhere I may want to have the mic, with my standing desk in any position.

I don’t usually leave reviews, but the BM88 definitely earned one. This mic arm has been a great addition to my setup. The build quality is solid, and the low-profile design is exactly what I was looking for. I’ve used a few mic arms before, and this one outperforms all of them. It’s sturdy, moves smoothly, and stays right where I place it. It also doesn’t get in the way of my monitor or block my view, which makes a big difference. Honestly, I don’t see myself needing another mic arm anytime soon bc this one does it all. If you’re on the fence, I’d say go for it. It’s absolutely worth it.

For the money, this is a very good microphone arm. Easy to install took maybe 5 minutes tops. Excellent stability while still being able to move the mic position or swivel it completely out of the way. The low profile design is great for my setup since it doesn't block my side monitor like my previous arm did. Seems like it should be compatible with a wide variety of mics out of the box with the included adapter. My Shure mv7+ screwed right on without issue. Also very impressed with the nicely weighted base clamp that attached to my desk very firmly with zero wobble. The cable management built into the arms is also well designed and easy to route through.

Reviewed By A Streamer/Creator of 6 years: Pros: High Quality Sturdy Boom Arm that gets the job done, Easy to setup, Has 2 great features that come into handy (able to twist/turn the boom arm towards/away from me & ability to hide microphone cable as well), price for the quality you get. Cons: The Ball that holds the microphone is confusing to setup and doesnt allow for the microphone to be setup/held up in certain ways

=Intro= I have this Boom Arm attached to a Fifine AM8 for casual communication uses as I am upgrading my audio set-up to have a dedicated mic and headphone solution as opposed to a headset/mic combo, as the mic on my current headset is failing. =Aftersales Support= Originally when the arm came, the hand screw piece that clamps the mic down to the arm broke after I tightened it. I then reached out to Fifine Support [Rosie] about the issue, and after a few days, I had a brand new hand-screw part in hand at no cost to replace the old one, which now works and does not suffer from the same issue, so thank you for good after sales support on that. Now, as for the boom arm. =Physical Specs= The arm itself extends to a total length of ~28 inches, not including the length of your mic, which I feel is ample to position your mic roughly ~5 to 6 inches from your face even from a laid-back posture, if you were all the way pushed in to your desk. You can tighten the joints of the arm with included hex wrenches. I have not tested the tightness of the joints after tightening as that's not my use-case. The clamp itself has a very small desk footprint, taking up about 2.5 inches in width, and 2 inches in depth on the desk. The ball joint for adjusting the mic at the end of the boom arm is a bit finicky to adjust at first, as one clamp is responsible for adjusting the mic left and right, and also up and down. Luckily, the aforementioned hand-screw makes tuning this a bit easier. I've got it tightened to a point where I can adjust it with some force while tightened, but the mic still holds in place. =Cons/Feedback= Something that I wish they had added is the ability to drill the boom arm into your desk as opposed to a clamp, similar to a monitor stand. It's hard for me to tighten the arm entirely due to the clamp's position on my desk. This does not seem to be a common concept amongst other boom arms for some reason. Also, instead of a long hand screw to tighten the clamp from the underside, it would be nice if it was a cross-style or T-style hand screw so it would be easier to tighten the clamp in tight spaces [i.e, between desk legs and a drawer which is where my clamp is]. I'm not entirely sure if this is due to me over-tightening it, or adjusting it while tightened, but the ball-joint's powder coating seems to be scraping off a little. This doesn't seem to affect the functionality of the mic as a whole, or the overall general appearance, but just something to note. I do feel at times the clamp or the socket (unsure which) where the arm where the arm connects to the clamp is a tiny bit wobbly if I brush it with my arm, but I would say is stable at the end of the day. =Price= I got it on sale at ~40$, however even at MSRP, this is a solid buy as a beginner level boom arm. It holds my mic in place, pushes away easily when I don't want it there. Most other boom arms start at ~70$ from the research I had done from more established audio companies [Shure, Rode, Elgato, etc] for a hanging boom arm, with low-profile options costing more. I definitely feel like that this is a very competitive pricepoint for this boom arm.

Excellent boom arm. Very similar to one made by El Gato. I actually like Fifines better than El Gatos. High quality and even capable of holding up heavy mics. Cable management is a breeze and this thing is like half the price of lead competitors. Mount is super solid. And it folds back very compact.

If you're looking for a boom arm that looks flush within your setup and has good moveability, then this is the one. The setup is super easy, and the build quality is premium since the arm is made of heavy metal. There is also cable management, so you can easily tuck them away for a cleaner and more cohesive look. It's also easy to adjust and swivel the arm to whatever height or level you need. Overall, highly recommend.