Laser Engraver Enclosure with Ventilation Kit and LED Light, Fully Enclosed Laser Engraving Machine Cover Tent, Isolates Smoke and Odor, Dustproof, Fireproof, Enlarge Size For Most Laser Cutter

Cons: The frame is a really tight fit inside the fabric. Think a 400 pound person trying to fit into a size extra small wetsuit. It is a real struggle to get that frame inside. Bare minimum instructions are included, but you really don't need them. Once assembled, it is very lightweight, but the tight fit is an advantage that makes it more solid. As in the description, the completed box is fire resistant fabric, not a solid plastic or metal box. I was disappointed that the difficulties with assembly meant that I could not consider this project to be a portable item, that could be assembled and disassembled to put in storage. Yes, the orange windows wrinkle and I do not trust that their tint is appropriate for my specific laser. I still use safety glasses, but I bought this product for smoke containment.Pros: Good price. I wanted a full enclosure, and most competitors did not offer one with a floor. The floor provides better seal for ventilation, easier cleanup, since it will catch all those little burnt particles, more protection for the table underneath, and less risk of fire since fire resistant fabric will be under the direction of the laser beam. The dimensions are exactly as described, down to the 1/8 inch. The LED light strip was a nice bonus that really lights up the interior. The exhaust and wire holes are on both sides, so I can run cables/ductwork out of the the left or right side. I run the duct out a window. It does a good job of venting smoke, but note that it does not vent 100% of the smoke smell. I run it a little longer before opening the zippers, and have a air purifier nearby. By taking those extra steps, I do not smell any smoke an hour later, and only a faint smoke smell during use.

I was surprised by the completeness of the kit. Comes with exhaust fan and a little led light bar that can be clicked on wherever you need it. Both, the fan and the led lights are running of a usb-a plug each so you need a usb charger plug with more then one outlet or perhaps two of those little chargers. The power supplies are the only thing “missing” in the kit. That what clearly stated and expected. We all should have more then enough of those guys collecting dust somewhere in a drawer at homeI was expecting the exhaust tube to be of the cheap silver metal kind that is used for dryer install. Imagine my surprise that this tube is actually a kind of fabric/rubber hose. This hose should hold up quite nicely.The frame of the tent is metal tubes instead of plastic That leads to a nice stable frame. The fabric all around is a nice snug fit, if you have arthritis in your hand you will need most likely have help from someone. But the whole setup is just nice.The bottom piece that is included in this kit is also nice. Velcro all around makes sure it is connected to the tent itself and helps keep smoke inside. So much so that I wonder where the air that gets sucked out comes in? Perhaps thru the little opening left and right for cables and stuff. Can be hooked up left or right, your choice.The zippers open and close without getting “stuck” or lifting the whole tent up while opening.All together seems really nicely made and a great deal for the 55 dollar I paid for it.I can recommend this tent wholeheartedly for all that have a similar device as the elegoo phecda laser. 2400 by 400 usable burning area.I plan on engraving and cutting more frequently fly and will see how well the fan can handle more smoke.I will update the review should anything fail prematurely or something turns out to be not adequate for the task.Would by it again I’m a heartbeat, really nice kit.

Does awesome job, no smoke very little odor. Protects eyes, so don't have to wear glasses. Fully enclosed.

I like the design and concept, the filtered plastic to help protect your eye is awsome! However I'm a little disappointed because there are several pen size holes throughout the tent that allows for the light to come through along with the fumes to escape. The zipper teeth also doesn't want to stay together tight light shines through the teeth as well. Not sure what I want to do at this point.

I've seen other cloth covers and although they look tight and smooth in the brochure they are horribly wrinkled and look aweful once assembled. This one looks and great and has a very tight fit. Easy to assemble and fits my Ortur Laser with room to spare. Fan hose and light are included. Worth every penny.

This is a good sized enclosure that does a great job containing smoke and protecting your engravings. Also has multiple cable and fan cutouts on both side, highly recommend.

This cover works great with my Sculpfun S30 Pro 10W laser. Assembly was easy, and it has a lot of thoughtful features, like the pocket on the right side which is just right for keeping track of your focusing tool. Ventilation can be set up on the left or right side. The orange windows blocks most of the blue diode laser light, but I would still use ANSI spec glasses while using it. However, for the stray person walking through the garage during a print, the tint is a fantastic feature. The led light bar is a great, and really useful. The included exhaust fan actually does an acceptable job routing the smoke through the 3 or so meters of 3" ducting that is included. Since the case actually includes a bottom, the exhaust situation is completely adequate. I am really happy with this enclosure. You will need some USB chargers on hand to power the light bar and exhaust fan.

Seriously this came in with a hole and the fireproofing material rubbed off where it was folded over. Definitely wouldn't trust this to last very long if at all. This is a $10-15 item at best. The prices they are charging for dollar store quality items is ridiculous.

Aucun problème pour montage ni de déchirure comme bcp le note. Juste due racheter un tuyau car les 2m de celui vendu avec etais trop court

Ja, man muss etwas arbeiten und beim Zusammenbau etwas denken (das beiliegende Anleitungsblatt ist ein Witz), dann geht der Aufbau ohne Risse und Schäden. Der Bezug sitzt sehr straff, was gewünscht ist damit es nicht so schlapprig, wie bei Konkurrenzprodukten meist der Fall ist, sitzt. Super ist auch die Lösung mit dem Boden. Ob der Lüfter genug Durchsatz bringt wird sich noch herausstellen. Das LED Licht ist kaltweiss und genügend hell.

Difficile à installerLa visière orangé ne protège pas du tout du laser.Sinon fait le travail

Preis-Leistung passt.

Sehr gute Abdeckung inkl. Rauchabzug durch ein mitgeliefertes Inventar.Die Anleitung besteht zwar ausschließlich nur aus Piktogrammen, stellt aber kein Problem dar die Abdeckung aufzubauen.Man muss sich im Klaren sein, dass es sich um eine nicht feste Kunststoffabdeckung mit Reißverschlüssen handelt. Tut dem Zweck aber keinen Abbruch und funktioniert einwandfrei.Ich habe die Abdeckung jetzt seit 1 1/2 Wochen in Betrieb und kann gemütlich und ohne Geruchsbelästigung daneben sitzen und andere Dinge erledigen 👌🏻