Off-Camera TTL Flash Sync Cord for Olympus/Panasonic Cameras - 6.5' (2 m) Replaces Olympus FL-CB05

works great but too long for what i needed it for

Good cord, perfect length. Really handy for street photography

I'm sure there is a reason why someone would need 2 meters between their hot shoe and flash, but I do not. This item does exactly what it is meant to do and is of very nice quality, but the extra length is a bit of a challenge. The locking lever on the hot shoe end is very nice, but it would be nice if it could mount with the cord running the opposite direction.

I found this particularly helpful during an outdoor product photography shoot where having a large light setup wasn't possible. My assistant was able to easily hold the off camera strobe at the product setup to fill in shadows. The cable is sturdy and the coil stretchy enough to allow enough distance from camera without having to 'pull'. It also helped me keep track of my strobe in all the chaos. I would love to have a longer cable and will see if they offer one as in studio you do need your strobe setup and tripod setup relatively close due to the coil of the cable

So far I have just done a few tests, but it works as expected and is just what I needed to move the flash away from the top of the camera. It seemed a bit strange that the cord pointed forward on the hotshoe mount, but I found that this is necessary if you want to use the camera hand held and be able to use the viewfinder. It may be necessary to weigh down the light stand with the flaslight with a sandbag because even if it is a spiral cord between the camera and the flash it is a bit stiff, and could cause the stand to tilt and fall over if stretched.

Flash cord works but the design attaching to the hot shoe of the camera makes this unusable. Cord design comes out straight to the front of the camera and the heavy cord falls in front of the lens. This makes it unmanageable and unusable for my work.

Works with all my E-series 4/3rds Olympus DSLR's (haven't tested with Micro 4/3rds) at a fraction of the cost of the Olympus model. Cord is heavy duty which can be a challenge to work with at times but a fair trade-off as it will hold up under frequent use.

This is a great cord. It's made of the "softer" feeling high quality matte appearance rubber vs the stiffer/shiny plastic/vinyl that cheaper cords are made with. The length is generous and it flexes really well. My only gripe is that the flash hot shoe is "backwards" in my opinion. Meaning that when you mount a flash on the end of the cord the cord connection point is sticking out the front of the flash instead of being behind the flash. I also like that the camera end of the cord has a skirt on it to seal and weather protect the hotshoe when its mounted. This is a minor but annoying inconvience and thats why I gave it 4/5 instead of 5/5. At only a few $ more than the JJC one which is shorter and cheaper feeling.

Muy útil para macro-fotografía y retrato. Permite disparar el flash desde un ángulo distinto al de la cámara, manteniwndo la medida TTL.

This adaptor means you can take the flash off the camera which opens up a myriad of possibilities, a very useful tool

Difficilmente rimango così tanto da un prodotto di terze parti. Canon la conosco, da oltre 30 anni. Ma quando ho tirato fuori dalla scatola questo cavo TTL, davvero sono rimasto a bocca aperta. Qualità dei materiali più che ottima. Perfettamente funzionante sia con la RP connesso al Godox TT350, sia con una vecchia Nikon ed sempillice flash Auto, ovviamente perdendo la funzionalità TTL, in quest' ultimo caso. Il cavo è davvero grosso e bello consistente. La lunghezza è giusta, permette di spostare il flash lateralmente in modo agevole. Le slitte prevedono blocchi rapidi come i migliori flash professionali. E sono naturalmente in buon metallo.

商品到着まで、ちゃんとしたものが届くか不安だったが、今のところ余計な心配だったのかと思っています。

Nachdem ich mit meiner neuen D500 den SB-900 Blitz nicht mehr per CLS fernsteuern konnte, da die D500 keinen eingebauten Blitz hat, sollte für Nah- und Macroaufnahmen eine andere Lösung her. Da kam ich, als günstigste Lösung, auf das TTL-Kabel, welches zwar nur einen eingeschränkten Aktionsradius zulässt, für meine Zwecke aber ausreichend ist. Das Kabel ist ausgesprochen gut verarbeitet und die Funktion ist die gleiche, als ob der Blitz direkt auf der Kamera sitzen würde. Anschlüsse und das Kabel selbst sind recht dick, wodurch man sie gut greifen kann und das Ganze wertig aussieht, ist aber Geschmackssache, manche werden es vielleicht zu klobig finden. Der Anschluss für die Kamera lässt sich gegen ungewolltes Entfernen verriegeln, und der Anschluss für das Blitzgerät hat auf der Unterseite ein Stativgewinde 1/4 Zoll (also das ganz gewöhnliche), was man auf den Produktfotos aber nicht sieht. Zudem lässt auch er sich per Rändelmutter verriegeln. Das Kabel ist, wenn man es einfach so mal runterhängen lässt, etwa 95cm lang. Mit vertretbarem Zug lässt es sich auf etwa 150cm auseinander ziehen, da sollten aber Kamera und Blitz schon sicher stehen, da das dicke Kabel schon ordentlich Zug hat. Angesichts des Preises und der guten Verarbeitung kann ich das Kabel sehr empfehlen, wenn einem die Länge reicht!