🚗 Light Up Your Drive with G-PLUS Headlights!
The G-PLUS Headlights are engineered for 2009-2012 Dodge Ram 1500, 2500, and 3500 models, ensuring a perfect fit for factory quad style halogen headlights. With enhanced brightness, durable materials, and a waterproof design, these headlights provide safety and reliability for all your driving adventures.
| Brand | G-PLUS |
| Color | Dodge Ram 2009-2012-Black(Basic) |
| Specific Uses For Product | Head Lights |
| Vehicle Service Type | Compatible with Dodge Ram 1500 2500 3500 2009 2010 2011 2012,, Only Fit 2009 And Above Models (New Body Style)，, Not Fit Only One Hole, Not Fit Led Projector Headlight Model， Not Fit 2006-2009 Models (Old Body Style), Not Fit Dual Beam, Only Fit Factory Quad Style Halogen Headlights；, Fit Headlight with Two Holes For Both High And Low Beam. |
| Year | 20092012 |
| Special Feature | Waterproof |
| Wattage | 65 watts |
| Auto Part Position | Front |
| Lens Color | Clear |
| Lens Material | Plastic |
| Item dimensions L x W x H | 22.06 x 20.09 x 11.82 inches |
| Assembly Required | Yes |
| Manufacturer | G-PLUS |
| Vehicle Fitment Note | Compatible with Dodge Ram 1500, 2500, 3500 models from 2009 to 2012 with new body style and factory quad style halogen headlights. Not compatible with dual beam, one hole, or LED projector headlight models, nor with 2006-2009 models (old body style). |
| OEM Part Number | [INTERCHANGE_PART_NUMBERS] |
| Vehicle Fitment Code | Dodge Ram 1500 2009-2012, Dodge Ram 2500 2009-2012, Dodge Ram 3500 2009-2012 |
| Model | Fit Dodge Ram 1500 2500 3500 2009-2012 |
| Item Weight | 15.47 pounds |
| Product Dimensions | 22.06 x 20.09 x 11.82 inches |
| Item model number | Fit Dodge Ram 1500 2500 3500 2009-2012 |
| Exterior | Chrome |
| Manufacturer Part Number | 02HLA3715ABW-NEW |
| Special Features | Waterproof |
R**Q
Works good!
(2004 F150 ) Leer truck topper. upper rear break light replacement worked great, fit was good. Electrical pins were compatible with my existing wire harness. Nice and bright . Liking the fit, form and function. Cleaned up area for installation of new light and installed the light with no problems. Strong Adhesive backing, so make sure you clean and position your light accordingly, once installed its difficult to reposition.. I did seal it up with some clear RTV around where it mates to the topper just to ensure a water tight seal behind the light but that was my OCD working.
T**E
Good fit and good light
Easy to install, fit perfectly. The double sided tape holds on solidly. There was a long pigtail which made connecting it to the vehicle easy. I temporarily used some spade terminals. I will be getting a getter connector and installing it. The long pigtail makes that not a concern. Also the lights are nice and bright.
M**N
Headlights.
These are trash. They look great but you can't see crap at night. Poorly made.
J**P
Good Light, DOES NOT FIT Perfect on ARE Cap on 2015 Dodge 2500
Good light other than its not an exact fit on an ARE cap on a 2015 Dodge Ram 2500.
Q**.
Great
Would recommend
U**E
Not a perfect fit
These headlights look fantastic. But The sockets are just a little bit off so when I put LED bulbs in, they wouldn’t fit. I had to take the metal ring off, put the bulb in, then put the metal ring over the bulb and screw down the metal ring. The poor fitment doesn’t stop there.There is at least a half an inch gap between the bumper and the headlight.And the other issue I’m dealing with now, which will take some customization as I have them adjusted all the way up and they’re far too low still. I’m going to have to put washers in to lift up the whole assembly for the hard mount areas and/or take the headlights out and see if I can clock the adjusters to give me more room.
H**N
Truck cap CHMSL
Nice lamp. A perfect fitting replacement for my faded, burnt out original lamp. Make sure you clean off all of the old adhesive tape residue and accumulated dirt and mold before you install the new one. You’ll need to have some exterior grade silicone caulk on hand to seal the wiring pass-through against water leaks. The pins on the wires snap into the harness connector housing once you’ve persuaded the old ones out. Nice and bright. Hope it lasts as long as the original one (14yrs)
R**O
It fits. It's easy. It works.
I failed PA state inspection due to this "third" brake light failing on my Leer cap mounted on 2007 Tacoma.The replacement came fast. All LED's. It was easy to install and fit perfectly.Clean the area up real good. Slow down! Be careful with placing the adhesive. Once you are stuck...you are stuck!Good product. Works fine.
C**R
Easy install
Nice and bright
R**W
Quality Product - Great Fit
Great fit in topper.
