ITX Mini Case - K39 (Steel) / With 2 Handles / 2 Standard Side Panels and 1 Acrylic Side Panel / 5.1L Ultra Small SFF Case

非常にコンパクト。 個人的にflex atx電源の入手性が悪すぎることを除けば、ほぼベストに近いケースだと思う。 取説もないに等しいし、どのようにするべきか考えながら作業するのも楽しい。

ケースの容積が小い割に精度が悪く、ミドルレンジ以上に多い接続端子の多いマザーボードの場合、パネルと電源ユニットが干渉してしまいます。 今回の構成ですは以下の通りです マザーボード：ROG STRIX B650E-I GAMING WIFI、 電源：SilverStone TFX/Flex SST-FX350-G CPU：Ryzen5 8500G 上記の組み合わせでは、電源とマザーボードが干渉してしまい、電源ユニットを0.2ｍｍ程削る必要がありました。 Flex電源は選択肢が少ないですが、ケースは非常に狭いため、ケーブルを外せるタイプの電源がベストです。 このケースはマザーボード裏側にライザーケーブル経由でGPUを取りけるスペースがありますが、個人的にこのケースにはAPUを搭載しマザーボード裏の空間を冷却用に確保するのがいいかと思います。 その場合、ケース内に空気を取り入れるファンが物理的にCPUの冷却ファンのみになるので、今回ケース全面に90mmの穴をあけ９２ｍｍファンをぶち込んでいます。 （全面アクリルパネルは神奈川県のさくら樹脂さんが運営するアクリル屋ドットコムにて発注しました） これによりマザーボード背面にクリーンエアーがケース背面に流れるのでケース内の温度を低くすることが可能です。 透明のアクリルパネルが付属しているので、メモリやCPUファンを光らせることでゲーミングPC擬きに的な遊び心があるのもいい感じでした。 投稿した写真ではケース上面にある電源ボタンを全面に移設しております。 併せてPS5との大きさ比較できる写真を上げておきます。 近頃は高性能で低価格のAPU搭載型ミニPCも多くありますが、故障した際の復旧日数、修理金額などを考えるとフレキシブルに対応できる自作PCに分があるかなと思います。

他のPCに比べて非常に小さく、気に入ってます。 マザーボードb550i aorus pro axを使用しましたが、このマザーボード裏面の放熱プレートに厚みある為、普通につけるとioパネルと少しズレが生じました。 フレームのネジを緩めると、なんとか取り付けはできましたが、ケース側のマザーボード取り付けフレームが少し曲がった状態になってしまいました。その為、反対側のグラフィックボードがケース外側に膨れ上がり、ケースの蓋と当たってしまうので、5mm程パッキンをかまして取り付けました。 また、ベルト状の取手は正規の位置だと、GPUバッフルで通し穴が塞がり通せなくなっていました。勿体無いので天板に取り付けました。 また、このケースはFLEX ATXの電源が必須ですが、日本では種類が少なく、かなり高価ですが、それでも小さいPCを自作したいという方であればおすすめです。

Rejected products

ライザーケ−ブルとgpuのスロットが合わない

This was exactly what I was looking for in a miniPC. I love that it will fit a single fan or low profile GPU and still has an internal power supply. Airflow isn't too bad either if you duct the fans and install enough 40mm-60mm fans as case fans. I don't remember if this is in the listing, but this comes with a fake leather handle too so you don't have to commit to having the big plastic handle on the top. I won't say the manufacturing is perfect, there's certainly some misalignment in the panels, but for a small steel case that feels this durable and is this small, I really can't complain.

I purchased the K39 v3. Did not come with a PCIe 3.0 riser cable. I used a 19cm double reverse PCIe 4.0 riser cable from ADT-link, even the case screwhole mounts for the PCIe x16 socket end of the cable lined up perfectly. Yes the case material is good and the paint work is good, however working with the case was not as simple as I thought it would be particularly the motherboard mounting frame and the ridiculous lack of clearance for the riser cable once the motherboard is installed, screwhole alignment was not a good as you'd expect at this price. I have had much build better experiences with a D19 which is a no name case at a less than half the price of the K39 and came with a riser.

Just builded my daughter's small form factor light gaming PC. Works like a champ and pretty good thermals.

Quality, tiny case made out of steel and painted white, the orange carrying handles are a nice touch. Recommended if you want something extremely compact without sacrificing too much performance, however if you're not experienced building SFF PCs, it can be tricky to work in this case due to how small everything is. Came with all the accessories needed to complete the build, including a screwdriver, all necessary screws and brackets, two kinds of carrying handles (one leather, one plastic) and a cute astronaut mascot magnet. Bear in mind you'll need a PCI Express riser cable if you want to use a discrete graphics card and your graphics card needs to be no more than 18cm in length. Built my system in this case with an AMD Ryzen 7 7700 processor, a Noctua NH-L9A-AM5 cooler, an Asus B650E-I ITX motherboard, 32 GB of G.Skill RGB DDR5-6000 RAM and a Gigabyte NVIDIA GeForce RTX 4060 low profile graphics card, all powered by a quiet Enhance 7660b FlexATX PSU rated for 600W. It's fast and silent while doing 4K-60FPS gaming, suitable for using with my TV in the living room. The case really is tiny, and even though it's made out of sturdy steel, you still need to be careful while assembling so as not to bend the panels. Take your time, disassemble all panels, don't force the PCIE rise through gaps and don't rush. All in all, excellent quality.

I've always liked the mini ITX factor, however hard the motherboards are to find. So, I decided to move my i5 9400 + Asus Motherboard (h310i) from a bigger Riotoro case over to this beautiful 5L thing. You have to really see it in person to understand how small this is (Perfect size, I'd say, in part thanks to the Flex PSU of course). And sturdy steel, I love that! But it was a breeze to install (no graphics board, though, which may pose some extra effort, and a riser cable, sold separately now). I didn't take off the back piece to mount the motherboard, just screwed in situ (YMMV). True, the USB cable is a bit long, the USB-C is interesting but not using it now. The power button is well positioned. The acrylic optional side panel is cool but I kept the steel one. You'll need to make holes in the plastic protector grill, to install the SSD on the side panel. Usually I guess you'll go nvme but this is an older build. I forgot to affix the handle (you need to do it at first), the strap is crazy. A box with goodies like screws and screwdriver is really a nice extra. My build runs cool with the Intel stock cooler. The price is excellent; the Flex PSU is where the real cost is. It really brought this old but powerful build back to life!