are you happy with this purchase? or do you wish you got the 13" model with 2 speeds for $150 more?

Am I happy, yes. Would I love to have the next model up, of course but needed a planer and was able to manage the 734 on a good deal that was over $250 less than a 735. I'd love to have both as some of what I do is barn wood that's rough on it. That said I can't count the feet of wood I've run but have built thousands of square feet of tables so if just 10% needed planing then that's still a lot. So yes, I'm happy. If someone offered to trade my a 735 straight up for my 734 I'd do it but not for any dissatisfaction. And yes it's a half inch bigger but haven't found any times when it was even close to mattering. I'm either sending pieces much narrower or so wide I'm wishing I had 12 more inches, not 1/2.

Can the in-feed and out-feed rollers or carriage lock be adjusted to reduce snipe

Make the last or final pass a very minimul cut depth ie. 1/64. This helps with snipe. The bigger the cut, the more snipe you will get. Make sure the material is support flat against the table as it begins the cut, and on the exit table as well. The pressure rollers tend to make the board 'tip' as it enters and exits (this is typical in any planer, even the big industrial ones found in mill houses). As far as waxing the tables, i much prefer to use a table top silicon type lube usually sold in spray cans at your local wood supply. These leave a non build moisture resistant film that will not only make the table very slick, but leave no waxy residue that can transfer to your lumber and cause finishing issues. Wax that transfers to your lumber can act as a release agent when applying typical lacquer base or poly type finishes. Last but not least, some snipe is considered acceptable from any planer. It's just the way it is. Always start with a board thats a few inches longer than finish length and plan on cutting off the ends. These little planers are better than most, but you can never plan on not haveing some snipe.

My first project with this will be planing 8"-10" wide Jatoba planks. How many linear feet can I expect to get out of one set of knives?

i really can not tell you , i still running my first set of knives and i have ran many hundred of feet thru , and they still run great we run oak, pine ,maple ,ash, walnut, beech , lot of oak &ash

Has anyone tried planning off paint on cedar with this machine? I have hundreds of feet to recycle.

yes. I've removed paint and finish with this.. not on cedar, but on mahogany and oak. However, do keep in mind that this will greatly impact the working life of the blades. But that's a small price to pay for such convenience. I say go for it. You'll love the result and it sure beats sanding or scraping with a card scraper.

Desertcart Logo

交付 Taiwan

获得最佳体验获取应用程序

下载应用程序

我们从

阿联酋
英国
印度
美国
日本
KOREA

客户服务

关于我们

客户支持

常见问题

产品是真实而真实的吗？+

是的，所有产品均直接来自美国，英国，阿联酋和印度的授权零售商。我们保持严格的质量控制过程，并在运输前验证每种产品。所有项目都有适用的制造商保证，并由我们的标准退货政策涵盖。

交货需要多长时间，这是可靠的？+

送货时间因目的地国家 /地区不等，通常从3-9个工作日不等。每个订单都可以通过我们的系统完全跟踪。我们处理所有关闭范围，并使用可靠的快递合作伙伴进行最后一英里的交付。您将通过电子邮件和我们的应用程序定期收到有关您的订单状态的更新。

什么是凡人车？从安全订购安全吗？+

自2014年以来，落伍车是一个国际电子商务平台。我们每天在全球范围内安全地处理数千个订单。每个产品都会在交付前经过我们的质量验证过程，我们提供端到端订单跟踪，24/7客户支持以及全面的回报政策，以确保安全的购物体验。

产品定价如何计算？+

我们的价格包括产品成本，国际运输，进口关税，关税和当地交货费用。我们处理所有海关和导入程序，确保交货时没有隐藏的费用。 Pro会员将获得额外的福利，包括免费送货。

ChatGPT - opens in a new tab Perplexity - opens in a new tab Claude - opens in a new tab Grok - opens in a new tab Google AI - opens in a new tab

TrustPilot

TrustScore 4.5 | 7,300多个评论

Pooja R.

客户服务超出了我的预期。非常适合购买在其他地方找不到的产品。

1 周前

苏雷什· K.

质量和快速送货让我印象深刻。会再次来这里购物。

4天前

查看所有TrustPiLot评论

Brand	DEWALT
Item Weight	36.29 Kilograms
Amperage	15 Amps
UPC	028875207348
Manufacturer	Dewalt
Global Trade Identification Number	00028875207348
Item model number	DW734
Product Dimensions	60.96 x 43.18 x 53.34 cm; 36.29 kg
ASIN	B0000CCXU6

DEWALT DW734 15 Amp 12-1/2-Inch Benchtop Planer

细节

描述

规格

有问题吗？看看别人问了什么

常见问题