Cafelat Group Gasket-E61 (Red), Silicone, E61 8mm, SYNCHKG060251

You should really measure your old gasket first, or at least confirm what the OEM size of your original gasket is. I quickly assumed the gasket in my Lelit Mara was a 8mm and ordered accordingly. It fit, but required an excessive amount of tightening to get the portafilter to seal; well past the 6-O-Clock position. I measure my OEM rubber gasket and found it to be 9mm. I reordered the 'blue' 8.5mm gasket and it's a much nicer fit. The portafilter tightens a little past the 6-O-Clock position, but much better than the 'red' 8mm gasket. The silicone is sturdy and seals very well, no leaks like my old rubber gasket was giving me, and I'm getting better shots since I'm not losing pressure to a leaky gasket. If you have an E61-style grouphead this is a good replacement gasket and a nice upgrade from a rubber one. It's inexpensive and very easy to replace. Also, get in there and do a good cleaning while you have the shower screen out. :-)

Installed this on my Rocket Giotto. I'd ordered a yellow gasket that was supposed to fit the Rocket from the place I bought the machine, but that gasket was next to impossible to install and felt too big. This was perfect (8mm) and installed easily. Works well inside the machine and no more leaking (My old gasket was quite old and brittle). One thing to mention: one side of the gasket will have a slightly rounded profile and the other side will be a square 90 degree profile. Make sure you install the gasket correctly - rounded profile fits into the rounded shower screen corner.

I wasn't sure if I should get the 8mm or 8.5mm gasket, but the 8mm gasket ended up working out well for my Rocket Appartamento that was previously leaking due to a very old (original) gasket. No more leaks and the portafilter catches nicely into the group head.

This is the second one I have bought; the first Cafelat silocone gasket was for Gaggia Coffee. I have installed it yesterday. Despite what some folks have said (and even Espressoparts, if my memory is not failing me, said "this is not the one we recommend") these work well for me. Fact is, when my Silvia was just bought, the gasket required realy, really superstrong tightening of the portafilter or it leaked. Eventually when 3 years ago I decided, after some more than 10 years to replace it, I bought the original gasket again. Sure enough, it is tough, not soft at all, and required lots of strength to tighten and kept leaking. And recently, after less than 3 years, I have not enough strength to tighten it. So, remembering my experience from 4 years ago when I replaced the gasket on my Gaggia Coffee (which I am sure was ... 20 years old and the extraction really took some doing) and was impressed with the results: the tightening required normal effort and no leaking was observed, I bough the same for the Silvia, in spite of the Espressoparts recommendation. Well, I am happy: I duplicated the Gaggia result: the tightening requires just a normal human effort, and no leak is observed. I know that over one year of constant use my Gaggia did not develop any leaks (I stopped as it was my office machine and during the pandemic I have been working from home). And then I kept using it intermittently (took on trips in a car) and it was, and still is fine - I have just resumed normal use by having returned to the office full time. So. Not sure what is expected, life-wise, from a 10-dollar gasket, but to me it is totally worth buying and is, in my opinion, better than the original

perfectly fit for londinium vectis, easy to install and snug fit

It does the job, but it seems to be harder and not very flexible.

As advertised. Got here quick and worked great! I got this one to replace the original for my Simonelli Oscar 1 and it works better than the original - very tight fit, no leaks.

I've been using these for years. They last much longer than the rubber ones and don't get hard over time. Highly recommended.