Tap Magic 10016E EP-XTRAOZ ONE Friendly Cutting FLUIDS - 16 OZ. SPOUT TOP

I wish I'd tried this years ago. I've been using 3-in-one, and there's no comparison. This makes cutting, drilling, and and tapping so much easier, and I need so little of it, it's great.Chips don't seem to clog up the taps and drills as quickly, either.It stays with the work on the lathe and doesn't sling off, also.I use a needle applicator to apply it to whatever I'm turning and can make 2-3 passes before I have to reapply, it hangs onto the work so well.The swarf tends to drop down, not sling all over the place as much as dry cutting or 3-in-one.And I've yet to see discoloration of aluminum.

The Tap Magic cutting oil is excellent! Just put a little on the bit and drill as normal. It not only keeps the bit from wearing down faster, but helps the bit stay cool and bites better. I am certainly glad I bought this and am very happy with my purchase.

This stuff is magic and a very superior cutting oil. I use it for tapping, threading and with my drill press. Much better than the regular oils I was using. Not sure how this stuff works but there is a definite improvement in cutting ability when using it. Drill bits that I suspected og going dull started cutting again after I applied this stuff.

I use this cutting oil when working with a drill press and it works great. Makes the drilling much easier and greatly extends the length of time between sharping drill bits. I used to use motor oil to keep from burning up the drill bits but this cutting oil works so much better.

Compared to other cutting fluids I've used Tap Magic really works! I've broken or ruined many a drill bit drilling through schedule 40 pipe or angle iron but no more.Couple drops of Tap Magic and you can feel the difference it makes allowing the drill bit to really bite into the metal.This is the only cutting fluid I've used where I could noticably see the benefit in using it!

I mainly drill and tap brass for model railroad projects. I don't know how I lived without this stuff for so many years. Definitely makes drilling and tapping in metal easier. Try it. You'll like it.

I've used this fluid for 5 years in a workshop for steel drilling. It keeps things amazingly cool and has kept all our drill bits from dulling very fast. The odor is also very reasonable (I've used some products that smell like dead animals).

I like this much better than other oils i have used, including basic shop oils. It keep the part lubed up nicely - a little goes a long way