The Kyoritsu 1009 digital multimeter (also known as a multitester) is an average-sensing, auto-ranging meter for measuring voltage, current, resistance, capacitance, frequency, and duty cycles in electrical testing applications. The meter comes with a set of detachable test leads. The meter measures duty cycles to 99.99%, indicating the percent of time a circuit is on. An audible continuity sensor confirms a circuit conducts electricity, and a diode test detects proper functioning of a circuit’s diodes. The LCD can display the present measurement value or the highest or lowest measurement value for a session. It shows readings in digits and on a bar graph. The relative mode stores a reading in memory to use as a zero point for subsequent readings so that multiple readings can be compared. The hold function keeps a reading on the LCD, even after the meter is disconnected. The unit automatically turns off after 30 minutes of nonuse to conserve battery life, and a low-battery indicator signals when the meter's batteries need to be replaced. A removable rubber holster helps protect the meter during transport and storage.

This average-sensing, or average-responding, meter provides accurate readings when measuring linear loads, such as standard induction motors and incandescent lights, where the current or voltage has an undistorted waveform. When turned on, the meter is in auto-ranging mode and automatically selects the correct operating range for the property being measured. It can be switched to manual-ranging mode, which allows the operator to choose the appropriate operating range. The LCD has a 4,000-count resolution, meaning it can display up to 3,999 units (3-3/4 digits) before the operating range needs to be changed. It meets International Electrotechnical Commission (IEC) safety standard 61010 and is certified for Category II installations up to 600V, which covers large household appliances and devices connected to a fixed power supply (such as refrigerators and air conditioners), and Category III installations up to 300V, which covers items used with enclosed building circuit installations (such as service panel parts, branch circuits, and fixed installations that are connected directly to a building's AC power supply).

Specifications

Maximum alternating current (AC) voltage input600 volts (V)Maximum direct current (DC) voltage input600VMaximum resistance detected40 megaohmsMaximum AC current input10 ampMaximum DC current input10 ampMaximum frequency detected10 megahertz (MHz)Maximum capacitance detected100 microfarads (μF)Power supply1.5V AA batteries (two, installed)Standards metEuropean Conformity (CE); International Electrotechnical Commission (IEC) safety standard 61010-1 and 61326Weight260 g/9.17 oz.Dimensions155 x 75 x 33 mm/6.10 x 2.95 x 1.29 inches (H x W x D)

H is height, the vertical distance from the lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back.

Multitesters (also called multimeters) are electrical test meters that measure multiple properties of an electrical circuit, such as current, voltage, resistance, capacitance, and continuity. Available in handheld or benchtop models, multitesters diagnose electrical problems in electrical equipment, wiring, and power supplies. A variety of probes, clamps, and leads can be used to connect the meter to a circuit or device. Multitesters display information either in analog or digital form. Factors that influence meter choice include the electrical properties to be measured, the anticipated range of results, and the desired level of protection against transient voltages. Safety ratings are based on the International Electrotechnical Commission's (IEC) standards for low-voltage test equipment. IEC 61010 delineates four overvoltage installation categories. In general, a meter with a category IV rating will provide more protection against transient voltages than a meter with a lower category rating.

Kyoritsu manufactures electrical testing and measurement instruments such as multimeters, clamp meters, and power quality analyzers. The company, founded in 1940, is headquartered in Tokyo, Japan.

What's in the Box?

Kyoritsu 1009 average-sensing digital multimeter
(1) Set test leads
(2) 1.5V AA batteries (installed)
Rubber holster
Instructions

Kyoritsu - KEW1009 1009 Auto-Ranging, Average-Sensing Digital Multimeter, 600V, 10 Amp, 40 Megaohms, 100 Microfarads, 10 Megahertz

细节

描述

常见问题