8 Pack Rubber Case Feet + 2 Set (20pcs) Repair Replacement Screws Set + 1pcs 5-Point Pentalobe Screwdriver Compatible with Unibody MacBook Retina for A1425 A1502 A1398 13" 15" Bottom Case

This makes me feel like I’m an Apple Genius Guy! I had so much fun replacing the feet and cleaning my years collection of dust in my MacBook! Here are the foolproof steps! 1. Place your MacBook on a sturdy desk preferably over a mat/towel so it wont move. Have good lighting over it too for maximum visibility. 2. Start taking off all 10 screws (2 short, 8 long) and put each of them aside according to where they are on your MacBook. This helps remembering which ones they are. 3. Slowly take off the back panel and you should hear two clips unlatch from the middle. These latches are to hold the back panel in place. 4. Clean out all the dust using a blower, canned air, or makeup brushes! This is the fun part! 5. On the back panel, remove the old feet and take off all the black plastic nubs that are in each of the holes. For the back two ones, cut an X with a knife to release the nubs (use the screwdriver to poke them out). Clean out the glue residue with nail polish remover/rubbing alcohol. I also washed the back panel with soapy warm water. 6. Remove new feets from the plastic container and align the big & small dots. Press firmly. I heated them up with hair dryer to solidify the glue even more. 7. Align the back panel with your MacBook back and make sure the two latches from earlier click before you screw it back all together. 8. I used the same screws to screw back the back panel since they are still good. Don’t worry about using new/old screws as long as they fit flush with the MacBook! 9. Now your MacBook will not move around on the table anymore!! Overall review: this kit is amazing, and definitely would recommend anyone looking for feet replacement. The whole process took 10-15min and now I feel like I have a new MacBook!

I noticed that one rubber foot was missing on my 13" MacBook Pro and so didn't sit balanced on a desk. I imagined finding a replacement and installing it might pose a hassle though felt sure Amazon might list some kind of kit. There were, in fact, several to choose from and I picked this one based on the positive reviews. I could not be more satisfied. Opening up the innards of your laptop is not for the faint of heart and I always expect something will spring out and create a costly repair. but there was zero drama. Everything you need is provided and swapping out for the new rubber foot was both quick and simple and now looks like new. It's perhaps inevitable that with the constant wear and tear, especially if you're constantly transporting your MacBook Pro around, that eventually you'll notice a foot has been lopped off. If so, don't hesitate to send for this kit to do the repair yourself. Extremely simple.

Other than taking 3 weeks to arrive, I am happy with the installation. We'll see how long it lasts. I had one foot wear off my mid-2014 13" MBP. Since the kit came with 2 full sets I replaced all 4 feet. It did take a good bit of cleaning with rubbing alcohol to get the old goop off. Old feet crumbled into many pieces. There was a clear round disc the size of the foot that you can't readily see that was the holder of the adhesive. If you scrape the perimeter with your fingernail or a blade you can peel it up and most of the goop will come up. Lined up new feet with tabs and they went on fine. Wiggled them a bit to be sure center post went in holes okay. Then just press hard. I used the new screws because I had them and my old ones were a little dirty although I'm sure they would have worked fine. Saved them for spares. Took a bit of wiggling to get the 2 center clips of the laptop back to reseat in their slots. Took maybe 15 minutes total if that much. All good now - laptop stays put on the beanbag lap pad I use.

My poor MacBook was in need of new feet so here I am. The kit includes two complete sets of screws and feet. The screws seem to be better quality than what came out. And there was even a magnetised screwdriver, which was much appreciated. When dealing with tiny screws a magnet really helps. The bad news is that no instructions are included. I had to come back to the product listing to verify which screws went where. They are colour coded, which is helpful, but if you don’t know which go where it doesn’t help much. It could be printed on something the size of a business card. I’m happy to have found this set and hope it lasts a long time. I hope this is helpful to someone.

These footpads have the same look and feel as the originals. The instructions were a bit off though as there doesn't appear to have been any reason to remove the backing plate? I did remove it, and clean the fans and exhaust ports while I was in there, but there is no "backside" to the foot pads. From the photo, and inclusion of screws, I'd thought there would be a foot that went on the outside and a holder tab that went on the inside, but these just glue onto the outside of the case, at least on my MacBook? It was nice to have the replacement screws, and the included tool worked perfectly. So, if the outer footpad area is clean and clear than these easily glue on with their pre-applied adhesive, but you might want to open it up anyway–there's years of dust inside ;)

Very happy with the change of these feet. Two fell off about a year old and I had no idea how easy it would be to change them! Also a nice added bonus to clean out the inside of my laptop. Only took about 5 minutes to change and only that long because I cleaned the inside and the screws are little. You do need the screwdriver though, I have seen other options on amazon without the screwdriver and those would be useless. You need to take off the bottom to change them out. It came with 8 new feet and 2 sets of screws!! I will keep them incase I need them again for some reason! Thankful to have a level laptop again :)

excellent set of tools for Mac. At a great price.

I bought this as I have a 1386 that lost a screw and the backplate was a little separated from the macbook body. The package came with the screws and pads and the driver (and some little brush thingy). The driver worked excellently and I used it to insert the new screw and then to tighten all the other screws. No problems and no broken tool--worth the money as I now have spares and extra pads and a driver to do the work myself. 10/10 great price for easy solution to potentially big problem. Thanks!!!

Este kit es de una muy buena calidad y las gomas cumplieron mis expectativas. El adhesivo que tiene es bastante fuerte una vez que se pega a la cubierta. Es importante considerar que el destornillador que viene de regalo sólo sirve para los tornillos de la cubierta, para tornillos internos es necesario otro destornillador.

Lo compré porque necesitaba reparar la Macbook pro de mi novia y fue de bastante utilizar, el material no se ve tan resistente pero es bueno para salir de apuros. Vale la pena porque viene con esos extras, un cepillo y algunos tornillos de repuesto más el antiderrapante de la macbook.

Rubber feet feel just like the originals and fit perfectly and stick very well. Included 5-point pentalope screw driver, although not high-quality, did an awesome job. I did not use any of the screws as I re-used the original ones from the case.