Hornit CLUG Bike Clip Indoor & Outdoor Bicycle Storage Rack & Mount System, 5 Sizes, Easy to install

I have two CLUGs... a "MTB 44-57mm" for my bike with 2.1"W tires and a "MTB XL 58-69mm" for my 2.6"W tires. CLUGs make storage a breeze! Sooo much floor space saved!! And honestly it's super attractive storage - I enjoy seeing the bikes there. Snapping the front tires in place and popping them out is super easy. I did listen to the reviews that said not to place CLUGs in a high traffic area, because the bike can get knocked askew. This is true - but I wouldn't want it to lock onto my bike so hard that damage is caused if I then crash into the bike while walking or carrying something! The CLUGs work perfect in the corner of my room. They also mount very securely to the wall. Would've been a breeze to mount with two people... someone to hold the guide in place. Unfortunately I didn't have help, but it was still manageable. The box comes with an AWESOME guide built right in to help you place your screws into the right spot. I can't imagine not having CLUGs now that I've experienced them! It's such simple storage!! Gives bikes their own space without bumping against anything or tipping and getting damaged. Also, the upright storage position is good for suspension in the forks... GearHooks says it well here: "If the bike is stored vertically on the wall, the forks are tilted backwards. This means that the oil in the forks runs backwards and pools against the foam seals. This keeps the seals properly lubricated and stops them drying out." All in all these CLUGs are one of my favorite purchases ever!

Super simple to install, just 2 screws (there's even a template for positioning, but we just used the bracket itself for placement). We mounted it on a stud in the tool shed so our son's mountain bike could be stored vertically and save us some space. We put it up yesterday and so far so good.Two things to note: the clip doesn't bear weight (which I knew from the product description, but it doesn't hurt to repeat), so don't expect it to get your bike up off the floor. The rear tire will be bearing the weight of the bike. The other thing - and this I didn't know until I tried putting the front tire of the bike on the clip - is that the whole process works best if you immobilize the front tire to the frame first so the handle bars/front part of the bike aren't pivoting as you're trying to put it in place. I was maneuvering in a small, enclosed space, so that may not be necessary for everyone. I used a velcro loop strap that we already had on hand.

Works as intended, but walls get really dirty

Bought this for my husbands bike. It was very easy to put together! Love that the sides of the box help you measure the tires as I was unsure if I got the right size. Also, it comes with a hanging guide. I used my screwdriver to poke holes in it, made some measurements, put the guide up and colored in the holes. From there it was a breeze! Seems sturdy and helps save so much space.

These bike holders are cool in concept but the product itself is cheap junk and will most certainly break very quickly with moderate/consistent use.I think if you can find the sweet spot of your specific tire size married up with one of these products it has the potential to work for a while - but it’ll break, I guarantee it. I tried picking these up for my older sons to use in our garage - they ride mountain bikes without kick stands so some sort of bike storage system was desperately needed that was easy to use for them. Both of their bikes have “Plus tires” which are stated at 2.6” wide. I tried the MTB XL as well as the MTB standard CLUGS hoping one would work. The XL was way too big and the bikes wouldn’t stand up and the standard size was way too small - so much so that when I was able to force the wheel inside the CLUG, every other time the inner plastic piece would separate from the outer plastic piece. It was about 5 more repetitions from cracking and breaking for good. The plastic seems super brittle and while it seems thin enough to flex a bit, there’s no way these things are lasting more than a week especially with kids putting their bikes in and out.Bottom line is these may work temporarily for some users but if you plan to use them daily (meaning, bikes in and out constantly) don’t bet on them lasting very long.

The concept is good, but as others have noted, the advertised size range in unrealistic. I measured one of our bikes as within the MTB XL range, but it was too big and the MTB size worked better. I measured another bike (using a digital caliper) at 1.99" (50.5mm) which was well within the MTB size range, but the fit was so loose that the bike fell off and sustained some damage. I tried the next smaller size, Hybrid, but while it held the bike very securely, it was next to impossible to push the bike into the clip (once there, it was very secure).My advice: if your tire measures at the small end of the range, just screw a regular bike hook into your wall for a fraction of the cost.Until Hornit provides more size options, I would suggest they make their packaging very easy to open and close so customers can test the fit and return the clip for a different one when they discover it's the wrong size.

Muy funcional y fácil instalación

Muy buen producto y además fácil instalación

Después de apenas 1 año de instalado, la.pieza que sostiene la llanta, se ha roto por completo. Tengo dos bicicletas instaladas en el.mismo ligar, una con un CLUG y esta última, en perfecto estado. El material de este soporte Hornit no es de calidad, inaceptable qué algo que sostiene bicicletas de alto valor se rompa de esta manera. No recomiendo este producto

Útil y fácil de instalar, lo único qué hay que tener en cuenta es que necesitarás poner algo para la llanta trasera que apoya en la pared si no quieres mancharla

Lindo práctico y fácil de instalar