XSPCFLX Tubing 3/8" ID, 1/2" OD, 2 Meters Length, Clear

Best soft tubing out there. No writing on it, doesn't discolor easily, doesn't leech plasticizer into your coolant, and unlike a lot of branded tubing it's actually true to size.

Perfect tubing for the price. My only complaint is that after a month or so it's started to fog, which I don't care about as long as it's doing its job. I could see others complaining about it however

Be sure to rinse the tubing thoroughly with soap and water. Then rinse again. It can achieve tight bends and is very flexible. This is the best soft tubing I have used for Liquid cooling in computers. Like any tubing dye will eventually bleed into it. This does not mean the tubing is bad product. I have yet to find soft tubing that wont absorb some color. When I finish my system I usually flush for 24 hours to test for leaks and clean out the loop again. I used Distilled water for this purpose. I use Thermaltake clear coolant in my cooling with no color. If I do decide to dye the coolant i use small amounts. The tubing is terrific.

I've used multiple brands of soft tubing for water cooling and this is by far the best. It's a bit softer than others which might be problematic for some, but for me it makes all the difference when attaching fittings and working with the tubing. Will buy this brand from now on.

Only brand is use in my builds.

Quality and accurate size.

Works but need correct size fittings, if you have 10mm ID by 13mm OD I could kink near the compression fittings or could be a little harder to make nut tight up

I have used hose from Feser, EKWB and Primo chill. The quality of this hose reminds me of the stuff at Home Depot that you buy in the plumbing section. It kinks way to easy and is thin it doesn't seem like this hose is made for water cooling at all. Just a general use hose I ended up not using it in my loop. It came in a generic white box with a printed label on it and they have no markings on the hose itself.

Have been using this tubing for a few different builds over the last 2 years and really happy with the overall quality. Very little discolouration, depending on your fluid. No distortion.

I have bought this tube for my PC liquid cooling. The tubes walls are clear and solid. This tube with 1.5 mm thick walls is sturdy as a tube with 2.5 mm walls (both are from XSPC). It is strong and flexible but as surprising as it is it edoesn't kink easily. It is a good product. Unfortunately, I won't be using for my PC build as I have decided to go for a thicker tube (because of the fittings that were available at that moment). Had I had the right fittings, I would have used this tube. I recommend this product if you want to have a PC cooling system with 13/10 clear tube.

Although this tube was cheap in appearance it seems to be holding up better than the alphacool tube I had previously purchased which seemed to yellow after a few weeks. This tube has been installed in my loop for about 3 months now and looks exactly the same as when i purchased it.

The quality of the tube is amazing. It serves the purpose very well. One thing to note is that the color is not 100% clear/transparent, it has a slight tint of blue.

Bought this tubing and it came today. Packaging saying 1/2" ID by 3/4" OD open it up and tubing is 13 OD by 10 ID mm. All they said is give me a gift card refund and order again. So now I got to wait to finish my build at no fault of mine. Will buy from Watercooling.UK next time at least they get it right. Tamping.