15074252 Tie Down Anchors Retractable Truck Bed Top Side D Ring - All Metal 3000 LBS Capacity 4 Pieces

For the price you're paying it really is a simple and durable kit. The instructions made hardly any sense but it wasn't needed anyway. Very self explanatory for someone with common sense. The fit and finish is great, matches my bed caps nicely. They're a good fit, the tabs that lock against the bed aren't too small or too big. Only complaint is the use of phillips heads for the screws. Might replace them with torx or an allen head if they ever annoy me. Another issue was trying to not crossthread the bolts when reinserting them. Other than that I got all four installed in 15 minutes.How to install:1. Loosen the phillips screws completely2. Insert the bottom portion of the anchor into the hole at an angle, pivoting it into position. Make sure the tabs on the anchor are secure on the bed3. Pull up the anchor (retractable part) until you can get the bolts threaded in. Be gentle, this is the hardest part. If its at an angle and its fighting you, back out and try again4. Once both bolts have started to thread in nicely, position the top plate where you want it and tighten everything down. Remember to put even pressure and go slow, don't wanna strip em

They were super easy and quick to install, which will make tying bulky items down a lot easier. And because the rings pop up and down, they keep a clean look to the truck when not using them.

In the Q&A multiple people claim it works on OBS Fords. Some even claim they are all the same because stake pockets are universal... Well they don't work on my 1997 F250 - not the fronts anyway. It might be a short-bed problem (if the pockets are somehow different). On Amazon some of these sets say "offset" and I couldn't for the life of me figure out what that means. On the Tigeracing website there's no mention of this, but there is mention of 6.5ft. versions, so maybe that's it??I digress. Can't really knock them for not fitting because the application didn't list my truck specifically - I may try to modify them to work with the fonts. I think it will be worth it because these seem very well made. The hardware seems high quality and the fit and finish is good. The design is pretty elegant -simple and easy to install.One thing for the engineers to think of though would simply be to turn the locking mechanism 90 degrees. The reason they don't work with mine is that the long sides of the pockets don't have much of a lip on them to grab onto and the hole is too narrow for the aluminum bar to fit, in fact the structure inside the bed is actually narrower than the hole itself and the outboard side is obstructed. However if the piece was oriented the other way it would work because there's plenty of room to grab onto the short ends of the pocket. Maybe they're thinking it wouldn't be quite as strong that way...My plan is to shave the aluminum block down a tad so that it will fit in the pocket and then jam the locking plate in and hopefully it will spring out enough to grab. If that doesn’t work I suppose I can make my own locking plate that grabs the short ends of the pocket instead.

The only gripe with these is when you pull the hooks out they do not like to stay in the up position. What happens is if you shake or vibrate the bed in any way they shoot right back down. Minor inconvenience but notable.

I am not able to get them to sit totally flat due to interference with the bed rail plastic cover (F-150). I just installed them a little canted and they work fine as is but are difficult to pull up into position if the cold weather is an issue for your old tired arthritic fingers! Go ahead and try them; pretty affordable.

Does not fit front of bed. These are not offset. Fits the middle and rear slots just fine.

Very well built and heavy duty, easy to install and easy to use. They also look great on the vehicle.

I bought these and installed them on a 2020 Ram 2500. They were very simple to install. I did have to do some cutting of plastic on the truck. I have yet to use them to see how sturdy they are, but I believe they will serve the purpose I bought them for.

Amazing quality, super easy to install - Ford F150 2010

real good quality, and easy to fit